Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Farmers Branch: What It Costs and What It Takes
Backsplash, tile & flooring work in Farmers Branch runs $14,000 to $45,000 for a full kitchen tile and floor package, with a backsplash alone landing between $800 and $2,500. Most of these jobs take five to ten working days from demo to grout sealer, depending on square footage and whether the subfloor has to come up. Call (844) 797-4808 for a free on-site estimate and a written, line-item quote before anything is ordered.
Here’s the part worth planning around: Farmers Branch has almost no buildable land left. Nearly every tile job we quote here starts by tearing out somebody else’s work from the 1950s, 60s, or 70s, and the prep under that old work is what decides your final number. Not the tile you pick.
How a Backsplash, Tile & Flooring Job Moves Here, Stage by Stage
We sequence these jobs the same way on almost every Farmers Branch kitchen because the order protects what you’re keeping. Cabinets installed over fresh tile is a different job than tile run up to cabinets that stay. Knowing which one you’re doing changes day one.
Stage 1: Measure, selection, and material order (day 1, plus 3 to 10 days of lead time)
We measure the backsplash run, count outlets and window returns, and check the floor for slope and bounce before anything gets ordered. You’ll pick tile, grout color, trim profile, and layout direction with us in the same visit. Porcelain and ceramic ship in a few days; natural stone and specialty shapes can hold the start date up a week or more, so we order before demo day, not after.
Stage 2: Demo and prep (1 to 2 days)
Old backsplash and flooring come out, adhesive and thinset get ground off, and drywall behind the splash gets patched where it was damaged. This is where we find the surprises: cracked 1960s slab, water damage behind a sink, or a floor built up in three layers of old vinyl and luan. We photograph what we find and quote any addition in writing before continuing.
Stage 3: Subfloor and surface correction (half a day to 2 days)
Floor tile needs a flat, stable substrate. In Farmers Branch, that often means a self-leveling pour over a slab that’s moved, or new cement board where an old mud bed has cracked. Skipping this step is how tile jobs fail two winters later, so we don’t skip it.
Stage 4: Set and layout (2 to 4 days)
Floor tile goes down first and cures. Then the backsplash sets from the counter up, with the layout centered on the range or the sink depending on how your kitchen reads. You’ll confirm grout line width and the trim detail at the ceiling or cabinet line before we mix a single bag.
Stage 5: Grout, seal, and walkthrough (1 to 2 days)
Grout goes in, gets sealed, and caulk replaces grout at every inside corner and counter joint so movement doesn’t crack the lines. We walk the job with you under the 730-Day Done Right Promise. If a tile sounds hollow or a line drifts, we fix it then, and it stays covered in writing after.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Backsplash, Tile & Flooring Options You’ll Actually Choose Between
Most of the decision comes down to four choices, and each one trades cost against upkeep.
- Ceramic vs. porcelain floor tile. Ceramic is the budget pick and fine in low-traffic areas. Porcelain is denser, handles North Texas humidity swings better, and is what we usually recommend for a kitchen floor. The price gap is modest; the lifespan gap isn’t.
- Backsplash material. Subway ceramic is the value choice and easy to repair. Glass adds light and cleans up fast but shows water spots. Natural stone and marble-look porcelain read high-end but need sealing and a little discipline. We quote all three so you’re choosing on cost, not guesswork.
- Layout. A straight-set floor is the least expensive. Herringbone and large-format patterns cost more in labor and waste, sometimes 15 to 20 percent more in material alone.
- Fixtures that tie in. If the sink or faucet is changing while the tile is out, this is the moment. A Moen or Delta pull-down faucet and a Blanco sink get set before the backsplash closes in, not after. Homeowners often pair this with Vanities, Tile & Fixtures in Farmers Branch when the bathroom is getting the same treatment.
What Backsplash, Tile & Flooring Costs in Farmers Branch, TX
A full kitchen flooring and backsplash package in Farmers Branch typically lands between $14,000 and $45,000, with a backsplash by itself at $800 to $2,500. That spread is wider than it looks, and five things push it from one end to the other.
| Scope | Typical range |
|---|---|
| Backsplash installation only | $800 – $2,500 |
| Kitchen floor tile, tear-out and reset | $6,000 – $16,000 |
| Backsplash plus floor package | $14,000 – $45,000 |
| Subfloor or slab correction (add-on) | Quoted in writing after demo |
What moves the number: square footage, obviously. Then existing condition, because a 1960s floor with three layers to remove and a cracked slab underneath is a different job than a clean tear-out. Material grade matters, and so does pattern complexity. Finally, whether plumbing or electrical has to move. Relocating a sink or adding an outlet behind the backsplash adds trade work before tile goes back up.
Every written estimate lists demo, prep, materials with grade named, labor, and disposal. What it doesn’t include unless we call it out: structural repair, appliance disconnection, or unexpected moisture damage. We show you those findings with photos and price them before we touch them, so the number you approve is the number you pay. That’s what upfront pricing, no surprises means here.
See the difference
Before
After
Before
After
Before
AfterWhat Farmers Branch Homes Specifically Do to This Job
Farmers Branch is a small, fully built-out inner-ring Dallas suburb in ZIP 75234, and that shapes every tile job we run here. Almost no new residential land exists, so the work is renovation and rebuild of existing structures, not subdivision construction. The core housing stock is mid-century ranch homes and post-war cottages from roughly the 1950s through the 1970s, and many now get remodeled, expanded, or scraped and rebuilt as the area redevelops. Where that housing meets the Dallas line near the Brook Hollow and Marsh Lane side, we regularly find kitchens that were updated once in the 1980s and are back on the list now.
The soil underneath matters more than most homeowners expect. The Blackland Prairie clay here swells hard in wet springs and shrinks in drought, and slab movement telegraphs straight up through tile. We see cracked grout lines and popped tiles in Farmers Branch kitchens that look perfect at sale and fail two summers later, which is why we check for movement and flatness before setting a single tile rather than after. The city also enforces codes and permits firmly on older properties, so work that opens a wall or moves plumbing gets permitted and inspected. If your tile job is part of a larger scope, that wider project lives on our Kitchen Remodeling in Farmers Branch page. For tile-only or tile-and-fixtures work, this is the page. Either way, you’re covered through Farmers Branch.
Serving Farmers Branch, TX – Our Local Coverage Area
We serve Farmers Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Backsplash, Tile & Flooring in Farmers Branch
Plan on five to ten working days for a combined backsplash and kitchen floor, with a standalone backsplash done in two to three. Lead time on materials and any subfloor correction are the two variables that stretch it. Call (844) 797-4808 and we’ll give you a calendar, not a range.
Tile-only work without moving plumbing or electrical generally doesn’t require one, but anything that opens a wall, relocates a sink, or adds a circuit does. The city enforces permits firmly on older homes, so we pull what’s required and pass inspection rather than skipping it. Your estimate states exactly what’s permitted.
Yes, and that’s the most common way we do it. We tile from the existing counter up to the cabinets, cut around outlets and window returns, and finish the top edge cleanly. It saves real money. If the sink or faucet is changing, that swap happens before the tile closes in.
A backsplash alone runs $800 to $2,500, and a full kitchen floor and splash package lands between $14,000 and $45,000. Material grade, square footage, and subfloor condition drive the spread. Call (844) 797-4808 for an exact quote. Estimates are free.
Every backsplash, tile & flooring job here is covered by the 730-Day Done Right Promise. If a tile pops, grout cracks, or a line drifts, we come back and make it right for two full years. That’s in writing, and our technicians have up to 12 years of experience setting tile.
Get a Free Backsplash, Tile & Flooring Estimate in Farmers Branch
Call (844) 797-4808 and we’ll schedule a free on-site estimate for your backsplash, tile & flooring project in Farmers Branch. We measure, look at the subfloor, talk through material options, and leave you with a written line-item quote. Calls are answered by a live person around the clock. Projects over $10,000 get $1,000 off, and 0% financing for 18 months is available. If you’re weighing a bigger renovation at the same time, our Kitchen Remodeling service covers the full scope, and many homeowners pair tile work with a Tub-to-Shower Conversion in Farmers Branch while the trades are already in the house.
Written by the team at Groundwork Construction Co.