Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Farmers Branch, TX: What It Costs and How Long It Takes
A tub-to-shower conversion in Farmers Branch usually runs $3,500 to $10,000 and takes three to six working days from demo to final walkthrough. On a typical 1950s-70s ranch home here, most of that time goes to water management and inspection, not tile. We build these on a mortar bed over a waterproofed pan so the shower still drains correctly after twenty years of North Texas clay movement. Call (844) 797-4808 for a free on-site estimate.
How We Run a Conversion, Day by Day
The sequence matters more than the material list. Here’s what actually happens on a tub-to-shower job.
- Stage 1 – Strip and protect (day 1, half day). We lay floor protection, shut the water, and take out the tub, surround, and any furring behind it. You decide here whether the layout stays in place or shifts, because that call sets everything after it.
- Stage 2 – Open the wall and set the drain (day 1-2, one to one and a half days). The valve gets exposed, soldered, and pressure-checked. The drain assembly goes from tub overflow to a centered shower drain. If you’re changing geometry, this is when plumbing and any electrical for lighting or a fan moves. This stage is where surprises live in older Farmers Branch stock, so we open the wall before we quote a hard number on plumbing.
- Stage 3 – Waterproof and inspect (day 2-3). Cement board or a bonded waterproofing membrane goes over a sloped mortar bed or a pre-formed foam pan. We flood-test the pan and schedule the inspection if the permit scope requires it. You approve the niche height and the curb height at the end of this stage, because both are hard to change later.
- Stage 4 – Tile and set (day 3-5, two to three days). Wall tile, floor tile, grout, and sealant. You’ve already picked the field tile, the trim, and the grout color; we’re installing to spec.
- Stage 5 – Glass, fixtures, and walkthrough (day 5-6). Door or panel, showerhead and trim, caulk cure, cleanup, and a working demonstration of the drain and valve. Final payment follows your approval, not our calendar.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Most homeowners go back and forth on three things: the pan, the wall surface, and the glass. Here’s the honest trade-off on each.
- Pre-formed acrylic or fiberglass pan vs. a tiled mortar bed. The pre-formed pan installs faster and costs less up front, but it’s a single color and one shape. A tiled mud bed gives you any size and a seamless floor, but it adds roughly $800 to $1,800 and a day of cure time. In a house with any history of floor movement, the mortar bed is the more forgiving choice.
- Tile vs. solid-surface wall panels. Tile is the long-term play and the more customizable, with real porcelain or stone options. Solid-surface panels cut install time and grout lines but read as budget, and the seam pattern limits you. Sakrete and Quikrete mortars and setting beds are the standard we set tile on; we don’t substitute.
- Framed vs. frameless glass. Frameless shows off the tile and cleans more easily at the edges, and it runs higher. Framed glass is a sturdier, cheaper call, and it’s the better pick if kids are using the shower hard.
- Valve and trim grade. A new thermostatic valve and trim set is not optional on most conversions of old tubs; the old one is usually at end of life. Budget for it rather than reusing it.
- Bench, niche, and curb height. A bench or low curb widens the door and helps with mobility, but it changes the floor slope and takes more tile. Decide it at Stage 1, not Stage 4.
What Tub-to-Shower Conversion Costs in Farmers Branch, TX
Expect $3,500 to $10,000 for the conversion itself. The full bathroom remodel bracket ($9,000 to $28,000) applies only when you’re doing the whole room along with it. Here’s what’s in the range.
| Line item | Typical range |
|---|---|
| Basic acrylic pan, paneled walls, framed glass | $3,500 – $5,500 |
| Tiled mud-bed pan, porcelain tile walls, framed glass | $5,000 – $7,500 |
| Tiled pan, tile walls, frameless glass, niche and bench | $7,000 – $10,000 |
| Plumbing relocation or new valve and trim | $600 – $2,000 add-on |
Five things push a job toward the top of that range: moving the drain or valve, replacing subfloor softened by an old leak, choosing large-format stone or a specialty tile, adding electrical for a fan or lighting, and getting into a permit scope that requires an inspection. Written estimates from us are line-item, so you see the demo, prep, waterproofing, tile, glass, and fixtures separately. What’s not included in most quotes: a new floor outside the shower, a new vanity, or a curb-less “zero threshold” design, which is a different build cost entirely. If those are in the picture, this is a full Bathroom Remodeling in Farmers Branch project and we’ll scope it that way.
See the difference
Before
After
Before
After
Before
AfterWhat Farmers Branch Homes Do to a Conversion
Farmers Branch is a small, fully built-out inner-ring suburb (ZIP 75234). Almost no new residential land exists here, so this work is renovation and redevelopment of existing homes, not new housing. The city enforces permits and codes on older properties, and it expects permits pulled and inspections passed; a conversion that relocates the drain or changes the valve is not a handshake job. Most of the housing stock is mid-century ranch and small post-war cottages from the 1950s to 1970s, so we’re regularly opening walls on a fifty-year-old valve and finding it done. Northern sections near the I-35E and Valley View corridor, and homes blending into the Dallas line by Marsh Lane, carry that same vintage. Combine that with expansive Blackland Prairie clay and a house that has shifted, and the shower pan needs to be built for the movement rather than just framed to code. If you’re already planning roof work alongside this, homeowners often pair this with Metal Roofing in Farmers Branch or Tile Roofing in Farmers Branch while the house is under renovation.
Serving Farmers Branch, TX – Our Local Coverage Area
We serve Farmers Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tub-to-Shower Conversion in Farmers Branch
Three to six working days of active construction, with most jobs landing at four or five. Inspection timelines set by the city can add a day on a permitted conversion, and mortar-bed pans need cure time we cannot rush. Call (844) 797-4808 for a schedule that reflects your actual bathroom, not a brochure.
Yes in most cases, because the drain assembly and valve change. Farmers Branch enforces permits on older homes, and a conversion that moves or replaces plumbing follows that scope. We pull the permit and get the inspection signed off; a contractor who tells you to skip it is telling you what kind of work they do. Call for a scope review before you sign anything.
Usually yes. A straight tub-to-shower swap keeps the drain and valve in the same location, which is the $3,500 to $6,000 scenario. Moving the drain, shifting the valve, or adding a bench or bench-less walk-in changes the plumbing and the floor slope, which pushes the job toward the top of the range.
$3,500 to $10,000, with the range set by pan type, wall surface, glass, and whether plumbing or electrical moves. A basic acrylic job is near the bottom; a tiled pan with a niche, bench, and frameless glass is near the top. Call (844) 797-4808 for an exact quote – estimates are free.
The 730-Day Done Right Promise covers our workmanship on the conversion for two full years. If it’s not done right, we make it right. That’s in writing, and it’s backed by background-checked, uniformed technicians on the job from demo to walkthrough. Call to see the guarantee before you compare bids.
Get a Free Estimate for Tub-to-Shower Conversion in Farmers Branch
Call (844) 797-4808 for a free on-site estimate. A live person answers, 24 hours a day, and we’ll book a visit that measures your bathroom, opens the wall if needed, and gives you a written line-item quote. No-hassle upfront pricing, 0% financing for 18 months, and $1,000 off projects over $10,000 apply. We cover Farmers Branch and the surrounding area, and our Bathroom Remodeling crews handle the wider room when you’re ready for it.
Written by the team at Groundwork Construction Co.