Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Grand Prairie, TX
We provide independent CGI service across Grand Prairie, from quartz slab fabrication to full cabinet installation. What sets our CGI work apart here isn’t the brand name – it’s that we plan every job around Grand Prairie’s expansive clay soils and the fact that this city sits in two counties at once. If you’ve seen a hairline crack near your sink or cabinet doors that won’t stay aligned, call (844) 797-4808. We’ll walk you through what’s likely happening before anyone touches your kitchen.

Why Grand Prairie Residents Choose Us for CGI Service
CGI quartz, granite and cabinetry end up in a lot of Grand Prairie kitchens. What separates a good install from a callback is whether the person doing the templating understands what’s underneath the floor. Groundwork Construction Co. of Dallas brings up to 12 years of technician experience to that question. We’re an independent CGI service provider, not affiliated with or authorized by the manufacturer, and that independence matters. We answer to you, not a brand rep.
We use CGI-matched and OEM-grade sinks, edge profiles and hardware where the brand’s own components are the right fit, and we’re honest when a quality aftermarket part makes more sense. Every project is covered by our 730-Day Done Right Promise, and our technicians are background-checked and arrive in uniform. Calls are answered by a live person, 24/7, even when a leak under the sink cuts loose on a Sunday.
Most of our Grand Prairie work sits in three lanes: Quartz & Granite Countertops, Cabinet Installation & Refacing, and Full Kitchen Remodeling. Quoting is upfront. The number you see is the number you pay.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Solve in Grand Prairie
- Quartz slab seams and edge failures. This almost always traces back to a slab templated before the cabinets were shimmed level. In older 75050 and 75051 homes where the floor has already moved, that mistake shows up fast.
- Hairline cracking at sink cutouts and cooktop openings. Quartz is rigid but brittle where it’s been cut. When the subtop and cabinet framing flex with slab movement on Grand Prairie’s clay, those cut edges take the stress first.
- Cabinet doors and drawer fronts out of alignment. Sagging hinges and delaminating thermofoil or veneer finishes are common after Grand Prairie’s humid summers. Doors that never lined up perfectly can drift into a visible problem within two seasons.
- Staining and dulling around undermount sink rims and range edges. Failed sealant lets standing water sit against granite and quartz. Over a few years that shows as a dull ring you can’t scrub out.
- Cabinet boxes that swelled after a slow leak. Particleboard and MDF boxes don’t recover. This is the case where replacing the box is the honest answer, not refacing over a soft carcass.
CGI Service in Grand Prairie: What Local Conditions Mean for Your Equipment
Grand Prairie is split between Dallas and Tarrant counties, and that single fact reshapes how a countertop or cabinet project gets run here. Depending on which side of the city your address sits on, a kitchen job that touches plumbing or electrical can pull you into two different permitting and inspection paths. A homeowner replacing a CGI quartz top with an undermount sink tie-in may need a permit under Dallas County rules; a neighbor a few blocks away could be working under Tarrant County’s process instead. Few suburbs nearby carry that dual-county friction in one jurisdiction. Before we cut a slab or disconnect a supply line, the permit gets pulled on the correct side. That step costs time up front and saves far more when an inspector shows up.
And the ground underneath makes it worse. Grand Prairie sits on the Blackland Prairie’s expansive clay, some of the most aggressive foundation movement in North Texas. On older blocks near the original downtown core in 75050 and 75051, we routinely find original slab-on-grade homes that have already been leveled once. Their floors have moved, were corrected, and kept moving a little. When you drop a rigid quartz top on cabinets sitting on a floor like that, every bit of flex concentrates at the seams and sink cutout. A typical Grand Prairie kitchen scenario: the homeowner spots a faint crack running from the undermount sink toward the front edge, and the cause is a cabinet run that was never shimmed flat while the slab flexes on the clay beneath. Underneath, the old top comes out, the cabinet framing and subtop get leveled and reinforced, the plumbing rough-in gets checked, and the slab is re-templated rather than reusing a compromised piece.
CGI Models & Products We Service in Grand Prairie
We work across the CGI line as it actually shows up in Grand Prairie homes: quartz slab countertops (engineered stone, fabricated locally to template), granite slab countertops, prefabricated and stock countertop blanks and vanity tops for quicker bath and rental work, and the custom and semi-custom cabinetry lines for kitchens and baths. Sealants, slides and hinges are chosen job by job, not pulled off a shelf – we don’t claim local stock, so parts get sourced to the spec the job needs. For chipped edges and seams, repair is often the right call. When a CGI top has cracked through a structural seam, or cabinet boxes have swelled and delaminated, replacement is the answer we’ll give you straight.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Grand Prairie
Upfront pricing, no surprises – the number you see is the number you pay. These ranges reflect the Dallas-area market and give you a realistic starting point.
| Service | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
What moves you within a range: slab size and seam count, edge profile, whether plumbing or electrical get relocated, and how much cabinet framing has to be leveled before templating. A free estimate includes measuring the actual cabinet run, checking for level, and a written line-item quote you can compare. 0% financing is available for 18 months, and projects over $10,000 get $1,000 off. Call (844) 797-4808 to schedule your free estimate.
Serving Grand Prairie, TX – Our Local Coverage Area
We serve Grand Prairie and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Grand Prairie
Do I need a permit in Grand Prairie to replace CGI quartz countertops and cabinets? If the work touches plumbing or electrical, yes – and the county that governs it depends on which side of Grand Prairie your address falls on. Straight cabinet and top swaps without utilities usually don’t trigger one. Call (844) 797-4808 and we’ll tell you which path applies to your address.
Why did my CGI quartz countertop crack near the sink? A crack starting at an undermount sink almost always means the cabinet run wasn’t shimmed flat and the slab has been flexing. Grand Prairie’s clay movement makes it worse. Repair and re-templating are usually the answer. Call (844) 797-4808 to get it looked at.
How long does a CGI kitchen countertop and cabinet project take in Grand Prairie? Countertop-only jobs typically run one to three days once the slab is templated; cabinet installation generally takes two to five days depending on scope. Add time if permits and inspection are involved.
Is CGI quartz or granite better for a Grand Prairie kitchen? Quartz resists staining better and needs no sealing; granite handles heat near a cooktop with less worry. For Grand Prairie’s humid summers and clay-driven floor movement, quartz performs well when the cabinet framing underneath is solid and level.
Can a CGI countertop be reused if I reface or replace my cabinets? Sometimes, but only if the top comes off without cracking and the new cabinet run sits at the exact same height and level. If the slab already has seam cracks or the boxes moved, removal usually breaks it. Call (844) 797-4808 for an honest read before you commit to either plan.
Service Areas Near Grand Prairie
We take on CGI countertop and cabinet work throughout our Grand Prairie service area, from the older blocks of 75050 and 75051 out to the newer subdivisions in 75054. We also work in neighboring Cedar Hill and Duncanville, plus Dallas, Irving and the surrounding communities.
Book Your CGI Service in Grand Prairie Today
Ready to stop guessing what’s under your countertop? Call (844) 797-4808 for a free estimate on your Grand Prairie kitchen or bath. Live person on the line, 24/7. Background-checked technicians, uniformed, upfront pricing, and the 730-Day Done Right Promise on every job.
Written by the team at Groundwork Construction Co.