A Groundwork company - serving Dallas, TX

CGI Construction Service in Dallas, TX

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Dallas Homeowners Choose CGI Construction

Groundwork Construction Co. of Dallas provides independent CGI cabinetry repair, refacing, and installation service across the Dallas area. What sets our CGI work apart is narrow focus: we handle the parts-level corrections CGI cabinets actually need in this climate, from thermafoil edge peel to hinge-cup resets, instead of treating every kitchen as a tear-out. We’re an independent CGI service provider, not affiliated with or authorized by CGI. The brand doesn’t endorse us. Dallas homeowners call us because CGI is what’s already in their kitchens, and we know those products down to the door style. Reach us at (844) 797-4808.

Contractor using a level to install bathroom wall tile in Dallas, TX

Call (844) 797-4808

Why Trust Groundwork Construction Co. of Dallas for Your CGI Construction?

Our technicians have up to 12 years of experience, and a good share of that has been spent on CGI installations across Dallas. They know the difference between a thermafoil front that’s peeling because the glue line failed and one that’s bubbling because the door was hung too close to the range. That distinction decides whether you patch, reface, or replace.

We source OEM-compatible CGI hardware by exact door style and finish code where the factory still carries it. Concealed hinges, full-extension glides, hinge cups: we match the part, not just the size. When a part is discontinued, we tell you and lay out the honest alternatives rather than forcing a close-enough fit.

Every CGI project we take on is covered by our 730-Day Done Right Promise. If the work isn’t right, we make it right. That applies to a set of resets and refaces the same as a full kitchen. Because we’re independent, we work to the CGI warranty terms instead of around them: no drilling through box panels, no aftermarket hinges that stress the original cup, nothing that gives a manufacturer a reason to deny a claim. And when you call, a live person answers, 24/7.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common CGI Construction Problems We Fix in Dallas

  • Thermafoil peeling and blistering at the door edges. CGI Thermafoil fronts are laminate-wrapped, and the wrap fails at the edge first. Dallas heat plus attic-adjacent humidity swings in kitchens under low-slope roofs work the glue line until it lifts. Once moisture gets under the wrap, the blister spreads inward.
  • Sagging doors from loose hinge cups. CGI all-plywood boxes with soft-close concealed hinges are only as straight as the hinge cup screws. Those screws pull out over years of daily open-close cycles, and the door drops out of the reveal so it rubs the neighbor or the frame. Left alone, a loose hinge chews the screw holes in the box face.
  • Worn drawer glides. Full-extension glides go sluggish as the rollers wear, then the drawer sits crooked in the opening and drags on the frame. On a Dallas cabinet run that’s 15 years old, glides are often the first hardware to fail, before the boxes show any real trouble.
  • Raised-panel hardwood and veneer door issues. Hardwood door styles can shrink at the stiles and open a seam at the panel, especially through a dry Dallas summer followed by a hard freeze. The door still functions, but the joint shows and the finish cracks along it.
  • Sheen and grain mismatch on reface jobs. When new fronts come from a different CGI production run than the original doors, the finish can read a shade off and the grain direction can run the wrong way. It’s a sourcing problem, not an installation one, and it needs to be caught before the order is placed.

CGI Parts & Our Repair-vs-Replace Approach

CGI parts come in two lanes: factory OEM and quality aftermarket. We favor OEM when the finish code and door style are still in production, because a matched hinge or glide keeps the warranty clean and the reveal true. When a thermafoil color has been discontinued, a partial patch that shows is worse than the problem. In that case, a quality aftermarket reface in a close laminate is the honest move, and we’ll say so.

The repair-or-replace call comes down to the boxes. If the CGI plywood boxes are solid and square, we replace doors and hardware and leave the carcass alone. Full cabinet replacement only makes sense when the boxes themselves have swelled, gone out of square, or lost rail integrity. We don’t stock parts locally, so lead time depends on what the factory carries; we confirm that before you commit. Call (844) 797-4808 for a free estimate and a straight answer on which path fits your kitchen.

Our CGI Service Process – Step by Step

  1. 1
    Diagnosis. We check box square, rail integrity, and the state of every hinge cup and glide on the CGI run, then sort the failures into front problems and hardware problems.
  2. 2
    Part matching. We identify the exact CGI door style and finish code, then confirm what the factory still stocks for that run before proposing a fix.
  3. 3
    Repair or install. On a sound box, we replace worn hinges and glides, reset hinge cups, and either re-hang matched CGI-style doors or reface with a laminate that reads close to the original.
  4. 4
    Test and re-set. We open and close every door and drawer to confirm the reveals are even and nothing rubs, then re-set the countertop and backsplash seams so the new fronts align cleanly.
  5. 5
    Warranty and handoff. The finished work goes on record under our 730-Day Done Right Promise, and we walk you through the terms in writing before we leave.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

CGI Products We Service & Install in Dallas

We service and install the CGI lines that show up most in Dallas homes. That covers Thermafoil European-style cabinet doors and drawer fronts; raised-panel hardwood and veneer door styles; all-plywood box cabinets with soft-close concealed hinges and full-extension glides; and CGI-stocked quartz and granite countertop slabs sold through dealer showrooms. That means door-and-drawer alignment, hinge and glide replacement, refacing on box-stable cabinets, full cabinet installation, and countertop install and swap on CGI cabinetry. If your CGI kitchen has a door style or finish we haven’t listed, tell us the code and we’ll confirm coverage before you book.

We Also Service These Brands

CGI is one line in a broader skill set. We also work on KraftMaid and Cambria cabinetry and surfaces, install Silestone quartz tops, and service Kohler fixtures and sinks that sit alongside CGI cabinets. That multi-brand familiarity matters in a Dallas kitchen where a CGI cabinet run is topped with a Silestone slab and finished with Kohler hardware. One crew, one point of accountability, from first call to final walkthrough.

FAQs – CGI Construction Service in Dallas

Is Groundwork Construction Co. of Dallas authorized by CGI? No. We’re an independent CGI service provider. We are not affiliated with or authorized by CGI, and the brand doesn’t endorse our work. That independence means we work to CGI’s warranty terms rather than around them. Call (844) 797-4808 if you want to confirm what your warranty allows.

Do you use genuine CGI/OEM parts? Yes, whenever the factory still stocks them. We match hinges, glides, and hinge cups by exact CGI door style and finish code. When a part is discontinued, we tell you up front and lay out the honest alternatives. Call (844) 797-4808 with your finish code and we’ll check what’s available.

How long does CGI service take? A hinge and glide reset on a standard cabinet run is usually a single-visit job. A reface or full door swap depends on how long the matched CGI fronts take to arrive, since we don’t stock parts locally. We confirm lead time before you commit. Call (844) 797-4808 for a real timeline on your kitchen.

What CGI models and series do you cover? Thermafoil European-style fronts, raised-panel hardwood and veneer door styles, all-plywood boxes with soft-close concealed hinges and full-extension glides, and CGI-stocked quartz and granite slabs. If your style isn’t listed, call (844) 797-4808 and we’ll confirm.

Will service void my CGI warranty? Not when the work stays within the warranty terms, which is how we operate. We avoid aftermarket parts or box alterations that give a manufacturer grounds to deny a claim. Call (844) 797-4808 and we’ll walk through what your specific warranty covers.

How much does CGI construction cost in Dallas? Common CGI kitchen projects in Dallas run roughly as follows:

Project Dallas Price Range
Cabinet Installation $4,000 – $13,000
Countertop Installation $2,000 – $6,500
Backsplash Installation $800 – $2,500
Kitchen Remodel $14,000 – $45,000
Small Kitchen Remodel $9,000 – $20,000
Kitchen Island Installation $3,000 – $10,000

A refresh on sound CGI boxes lands far below a full remodel, which is why we check the boxes first before recommending a tear-out. Call (844) 797-4808 for an exact quote. Estimates are free.

Book Your CGI Service in Dallas, TX

If your CGI cabinets are peeling, sagging, or dragging, get a real answer instead of a sales pitch. Call Groundwork Construction Co. of Dallas at (844) 797-4808 for a free estimate and design consult. We’ll check the boxes, match the parts, and tell you honestly whether a repair or reface is the smarter path. Live person, 24/7. Upfront pricing, no surprises.

Written by the team at Groundwork Construction Co.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch