Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Irving, TX
Groundwork Construction Co. of Dallas provides independent CGI service across Irving, from cabinet installation and refacing to full kitchen remodeling, and we’re not affiliated with or authorized by the manufacturer. What makes our CGI work different here is that we read the slab before we read the cabinet: in Irving’s postwar neighborhoods, a failing CGI box usually tells you something about the foundation under it, not just the finish on the front. Our technicians have up to 12 years of experience with CGI’s frameless and face-frame lines. Call (844) 797-4808 for a free estimate.

Why Irving Residents Choose Us for CGI Service
We know CGI cabinetry closely: the Euro-style frameless boxes, the Shaker and slab door profiles, the MDF and particleboard cores, the value-tier melamine and laminate finishes. That familiarity comes from thousands of installs across North Texas, not from a dealer badge. Being independent is the point. We aren’t tied to a manufacturer or a showroom quota, so when a CGI door is warped we can tell you whether to replace the front, reface it, or cut the whole run out. We source OEM CGI doors, drawers, and hardware when you want profiles and finishes matched exactly, and we spec quality aftermarket soft-close hinges and slides when the original CGI parts are discontinued.
Irving homeowners get a written line-item quote before anything gets ordered, and every project carries our 730-Day Done Right Promise: if it’s not done right, we make it right. That guarantee sits on the workmanship, not on a handshake.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Solve in Irving
The calls we take in Irving follow patterns, and most of them trace back to the house as much as the cabinet.
- Swelling and delamination at cabinet bottoms and toe kicks. In South Irving homes where slab moisture migrates through brick veneer and original 1950s vapor barriers, the particleboard soaks up from below and the box goes soft long before the door wears.
- Door and drawer front warping. West-facing kitchens take the brunt of summer heat cycling through single-pane windows, and CGI fronts on those walls cup and twist over a few seasons.
- Hinge and slide failures on frameless boxes. Overloaded cabinets in humid kitchen zones fatigue the particleboard core where the hinge plates seat, and the screws stop holding.
- Finish checking and edge peeling on laminate doors. Rental-heavy properties in 75060 and 75061 see heavier daily use, and the laminate edges lift first.
- Out-of-square boxes after foundation movement. When North Texas clay moves, the cabinet run moves with it, and doors that closed fine in March drag by August.
CGI Service in Irving: What Local Conditions Mean for Your Equipment
South Irving’s 1950s ranches were framed and slabbed before modern moisture-management standards, so when CGI cabinets fail in 75060 and 75061 the cause is often vapor drive through the slab rather than the cabinet itself. Those houses were built with shallow footings suited to the clay, and the vapor barrier under the slab was thinner or absent by today’s standards. Water moves up through the concrete, into the toe kick, into the particleboard. In Las Colinas and Valley Ranch, the same CGI lines installed in 1990s and 2000s subdivisions hold up far better because those slabs were poured with proper barriers, which tightens the scope of a kitchen rebuild down to door and finish replacement instead of full tear-out. Same brand. Two different outcomes, five miles apart. That split is the single most useful thing to know before you spend money on an Irving kitchen.
CGI Models & Products We Service in Irving
We work across the CGI lineup: Euro-style frameless cabinets, Shaker and slab door profiles, wood and MDF boxes, and the value-tier melamine and laminate finishes common in mid-range Irving kitchens. Replacement doors and drawer fronts are ordered to match your existing profile and finish, which matters most on partial refacing where a mismatched sheen is obvious from across the room. Nothing is stocked locally. Each job is measured, the parts are spec’d against your actual cabinet run, and they arrive before demo starts so your kitchen isn’t open longer than it has to be. When original CGI hardware is discontinued, we fit aftermarket soft-close hinges and slides rated for the door weight.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Irving
Here’s what CGI cabinet work and the surrounding kitchen scope runs in the Irving market. The number you see on your written estimate is the number you pay.
| Service | Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
Cost moves with box count, whether we’re refacing or replacing, door profile, and how much slab moisture remediation is needed underneath. A free estimate includes measuring the run, testing for moisture at the slab, and a written line-item scope before you commit to anything. Financing is available at 0% for 18 months, and projects over $10,000 take $1,000 off. Call (844) 797-4808 for an exact quote.

Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Irving
Because the damage comes from below, not from use. The slab has no modern vapor barrier, moisture wicks up through the toe kick, and the particleboard core swells and delaminates. The doors are usually the last thing to go.
Yes, if the boxes are structurally sound and dry. Refacing is the honest call when the fronts are failing and the core is intact. If the particleboard has swelled from slab moisture, replacement is the only durable fix. Call (844) 797-4808 and we’ll test the boxes at the estimate.
They can, depending on scope. Cabinet swaps that don’t move plumbing, gas, or electrical typically don’t trigger a permit, but layout changes and added islands often do, and older South Irving homes sometimes need pier-and-beam or post-tension re-engineering signed off before framing. We pull permits and pass inspections as part of the job, so that burden sits with us.
Shaker profiles dominate, with slab fronts showing up in contemporary kitchens and in the Las Colinas and Valley Ranch subdivisions built in the 1990s and 2000s. Refacing in those homes is straightforward because the boxes are still dry.
Intense summer sun through single-pane windows heat-cycles the fronts daily, and warping, checking, and edge peeling follow. It’s fixable: replace the affected fronts, and address the window exposure so the new doors last. Call (844) 797-4808 for a free estimate on that scope.
Service Areas Near Irving
We cover the Irving service area across all four ZIP codes and the neighborhoods around it, including Farmers Branch, Coppell, Dallas, Addison, and Highland Park. Our CGI service reaches the DFW corridor and the older South Irving blocks alike.
Book Your CGI Service in Irving Today
A kitchen in a postwar South Irving ranch shows CGI doors that won’t close flush and bottom panels soft to the touch; the usual cause is years of slab moisture wicking into particleboard through the toe kick. A qualified pro confirms moisture at the slab, replaces the compromised boxes, adds a vapor barrier and adjustable legs, and sets new doors with soft-close hardware before templating a quartz or granite top. That’s the work we do in Irving, backed in writing. Call (844) 797-4808 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of Dallas.