Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Irving, TX
We provide independent Jerith service across Irving, TX, working with licensed local contractors who install and repair Jerith aluminum and vinyl fence systems every week. The one thing that makes our Jerith work here different: Irving sits on two very different construction markets, and a fence that performs on a Las Colinas tower site is not the same fence that survives a 1950s South Irving lot. We are an independent service provider, not affiliated with or authorized by Jerith. Call (844) 797-4808 and a live person answers, day or night.

Why Irving Residents Choose Us for Jerith Service
Jerith builds a good fence. We know the product line inside out: Victorian Series aluminum, Regency Series aluminum, Provincial Series vinyl, and the Commercial-Grade aluminum runs. What separates good Jerith work from bad Jerith work in Irving is almost never the panels. It’s the footings, the drainage, and the hardware.
Our technicians have up to 12 years of experience, and they work on Jerith systems often enough to recognize failure patterns on sight. A gate that racks in 75061 looks different from one that racks in 75063, and the fix is different too. We source OEM Jerith posts, pickets, routs, and hardware so color and profile match the rest of your run. When OEM lead times stall a repair, we’ll fit quality aftermarket hinges or latches and tell you plainly that’s what we did.
Every project carries our 730-Day Done Right Promise. If it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it applies to fence work the same as it does to a kitchen.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Jerith Construction Problems We Solve in Irving
Fence failures in Irving tend to cluster into a handful of patterns. Here’s what we see most often.
- Heaved and settled post footings. Footings set shallow or in unamended black clay move with the wet-dry cycle. On South Irving postwar lots this shows up as gates that rack and latches that stop catching. It’s the single most common Jerith call we get in 75060 and 75061.
- Powder-coat chalking and edge corrosion on aluminum. Victorian and Regency pickets take years of DFW sun plus sprinkler overspray. West-facing runs are the first to show it. Corrosion at the cut edges is a sign the coating has given up, not that the fence is finished.
- Cracked Provincial vinyl sections. Vinyl cracks at the panel-to-post routs and gate stiles when the ground moves underneath. On older slab-on-grade lots without proper drainage, that movement is constant, and a vinyl run that looked fine for a decade can split after one wet spring.
- Sagging hinges and self-closing latches. Commercial-grade aluminum gates under repeated daily use sag long before the fence itself fails. Shimming or replacing the hardware usually solves it. Replacing the gate rarely does.
- Failed footing runs, not single posts. When one post heaves, we repair it. When six posts along a run are moving, patching is throwing money at a problem that comes back. That’s when we recommend full replacement, and we’ll show you why in the estimate.
Jerith Service in Irving: What Local Conditions Mean for Your Equipment
Here’s the detail that shapes every Jerith job on the older side of Irving. The mid-century lots in 75060, 75061, and 75062 were built with original shallow footings that were never engineered for North Texas black-clay movement. A Las Colinas high-rise crew working off drilled piers and a commercial site plan will never encounter this. A homeowner near the old downtown or the Hospital District will, every time the clay swells and shrinks.
For a Jerith owner, that means post footings on these lots need to go deeper than the active clay zone, and the run needs positive drainage before a single panel goes up. Skip either step and the fence looks perfect for one season, then the gate starts dragging. We plan the footing depth and grade the drainage as part of the job, not as an afterthought once panels are already set.
Jerith Models & Products We Service in Irving
We service and install the full Jerith residential and commercial lineup: Victorian Series aluminum, Regency Series aluminum, Provincial Series vinyl, and Commercial-Grade aluminum. The right pick depends on where in Irving the fence is going. Commercial-grade aluminum is the sensible spec along the Las Colinas and DFW corridor, where perimeter runs face heavy use and commercial-grade demands. Residential aluminum and vinyl fit the infill lots and rebuilds across South and central Irving.
Parts are sourced per job, matched to your existing color and profile, and confirmed before we order. We don’t claim a local parts stockpile. What we do is get the right part the first time and tell you the lead time up front. Upfront pricing, no surprises.

See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Irving
Fence pricing in Irving comes down to linear footage, footing depth, drainage work, and whether you’re replacing sections or the whole run. Here are the ranges we work from.
| Service | Typical Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Garage Conversion | $30,000 – $80,000 |
Deeper clay-rated footings on a South Irving lot add cost a shallow-footing install wouldn’t, and it’s the line item that keeps the fence straight. A free estimate includes footing depth assessment, drainage review, and a written line-item quote so you know exactly what each piece costs. Call (844) 797-4808 for an exact quote. Estimates are free.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Irving
Yes, if the footings are set below the active clay zone and drainage is handled. The aluminum itself holds up fine. The failure point on these lots is always the footing, not the fence. Setting posts shallow in unamended clay is what causes gates to rack within a few seasons. Get the footings right and a Jerith run in 75060 or 75061 performs for the long haul. Call (844) 797-4808 to have your lot assessed.
Fence permits in Irving are generally handled through the city, and requirements vary by height and location. The Las Colinas and Hospital District commercial corridors follow a different review track than a residential lot in South Irving, so the process isn’t identical across town. We confirm the permit path for your specific address before work starts. Call (844) 797-4808 and we’ll walk you through what applies to your property.
In most cases it can be fixed without replacing the fence. A sagging Victorian gate usually means the post footing has heaved or the hinges have worn, not that the panels are done. If the panels and pickets are sound, we re-set the affected posts and re-hang the gate with new hardware. Full replacement only enters the conversation when footings are failing across the entire run. For a repair quote on your Irving property, call (844) 797-4808.
Yes. We source OEM Jerith Provincial panels, posts, and routs to match your existing color and profile so the new sections blend with the old. Match quality depends on how faded the original vinyl has become, and we’ll tell you honestly if a visible seam is likely. Call (844) 797-4808 with your fence specs and we’ll confirm the match.
Yes, and it’s a common request as more Irving homeowners convert garages and add ADUs. Aluminum gives you a clean privacy screen that holds up to DFW sun without the maintenance of wood, and commercial-grade aluminum handles the heavier use a rental ADU perimeter gets. Garage conversions in Irving typically run $30,000 – $80,000 before fencing, so the screen is a small line item that finishes the project. Call (844) 797-4808 to fold the fence into your conversion estimate.
Service Areas Near Irving
We serve Jerith customers throughout Irving and the surrounding communities, including Dallas, Highland Park, University Park, Addison, and nearby. If you’re in Farmers Branch or Coppell, we cover those too. For Jerith work across the Irving service area, call and we’ll confirm your address.
Book Your Jerith Service in Irving Today
Whether your Jerith gate is dragging, your vinyl is cracked, or you’re planning a new aluminum run on a South Irving lot, we’ll give you a straight assessment and a written estimate. Our team handles Jerith service across Irving with OEM-matched parts and the 730-Day Done Right Promise behind every job. Call (844) 797-4808. A live person answers around the clock.
Written by the team at Groundwork Construction Co. of Dallas.