Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Coppell, TX: What It Costs and How the Approval Process Works
A chain link fence in Coppell, TX typically runs $3,500 – $9,000 for a standard residential lot, and most jobs are finished in one to three days on site. The bigger variable here isn’t the labor, it’s the approval: many Coppell neighborhoods require architectural review before a single post goes in the ground, and a fence that clears review the first time is a fence that goes up on schedule. Call (844) 797-4808 and we’ll walk your lot, check your setback and HOA rules, and give you a written number before anything is ordered.
How a Chain Link Fence Goes In, Start to Finish
Our technicians have up to 12 years of experience, and the sequence below is what we actually run on a Coppell property. Every stage has a decision point, and we try to get those decisions made before the crew rolls.
Stage 1: Site walk and review packet (day 1, 1 – 2 hours)
We measure the run, flag any underground utilities through the 811 call, and photograph the fence line where it meets your neighbor’s property. This is also where we pull together what your HOA or the city design review needs: fence height, post color, top rail finish, and a plot of the line in relation to your setback. In Coppell’s tighter infill lots, we sometimes find the existing fence sits a foot over a utility easement, and that has to be flagged now, not after concrete.
Stage 2: Removing the old fence (day 1, 2 – 4 hours)
Most Coppell chain link jobs are replacements, so the old posts and fabric come out first. Concrete footings get broken out and hauled, which is the part that surprises people on price. An older fence with 40 post footings takes longer than a 25-post line, and a fence embedded in a concrete curb or retaining wall takes longer still. We confirm the demo scope in writing before we start swinging.
Stage 3: Layout and set posts (day 1 – 2, half a day)
Posts go in at 8-foot spacing, set in concrete, and the terminal posts at corners and gates get larger footings because they carry the tension. On North Texas blackland clay, we dig a little deeper than a sandy-soil market would and let the concrete cure overnight before any tension is applied. That’s the stage where a rushed crew sets a fence that leans by the second summer.
Stage 4: Rails, fabric, and tension (day 2, 2 – 4 hours)
Top rail threads through the line posts, fabric gets stretched and tied off, and gates get hung and adjusted so they swing without dragging. Tensioning is where the fence either stands straight for a decade or ripples within a year. We check every tie and turnbuckle before we call it done.
Stage 5: Walkthrough and documentation (day 2, 30 minutes)
We walk the line with you, hand over any HOA documentation or inspection paperwork, and confirm the gate latches clean without a slam. Your project is covered by our 730-Day Done Right Promise; if something isn’t right in that window, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Chain Link Options: What You’re Actually Choosing
Chain link isn’t one product. What you pick here decides how it looks in year eight and what it costs up front.
- Galvanized steel vs. vinyl-coated. Galvanized is the lower-cost standard and handles Texas sun well. Vinyl-coated (usually in black or green) runs roughly 10 – 20% more and blends into landscaping better, which matters on the front-facing runs where your HOA or design review board actually looks.
- Gauge and wire weight. Residential fabric is commonly 11.5 or 12.5 gauge; the heavier wire holds tension longer and resists sag. It costs more per foot, and it’s the difference between a fence that lasts 15 years and one that looks tired at seven.
- Height. Four-foot is standard for a property line, five-foot is common where HOA rules allow, and anything taller needs a review in most Coppell plats. Confirm before you order.
- Gate package. Walk gates, drive gates, and the hardware that holds them are the first thing to fail on any chain link fence. Self-closing hinges and a heavier frame cost a little more and hold alignment.
- Top rail and tension bands. Full-length top rail with a tension band at every terminal post is the spec that keeps the fabric tight. Cheaper installs skip the bands, and you’ll see the difference in a windy spring.
What a Chain Link Fence Costs in Coppell, TX
Plan on $3,500 – $9,000 for a residential chain link fence in Coppell. That’s a real range, and here’s what pushes a job toward one end or the other.
- Linear footage. The dominant driver. A quarter-acre lot might need 200 feet; a half-acre lot with a back line and two sides can need 400-plus.
- Demo and disposal of the old fence. Removing and hauling old footings is a real cost, often $400 – $1,200 depending on post count and how much concrete comes up.
- Material grade. Heavier gauge, vinyl coating, and a full hardware package push the number up; standard galvanized fabric keeps it down.
- Gate count and type. Each walk gate adds cost, and a drive gate with a proper frame adds more. Gate hardware is where cheap bids hide.
- Access and terrain. Sloped lines, tight side yards, and fences that back up to a retaining wall all add labor. So do fences that have to work around mature trees and existing landscaping.
Your written estimate should spell out linear footage, gauge, finish, gate count, hardware, demo scope, and whether any HOA or review paperwork is included. What it typically doesn’t cover: landscaping repair after trenching, concrete curb work, or a survey if the property line is in question. We’ll call that out in writing rather than spring it later. Upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhy Coppell Homes Change How This Job Runs
Coppell’s build market is heavy on meticulous infill and tear-down rebuilds, especially around Old Town and the areas near the Coppell ISD schools, where city design standards and HOA architectural review boards look hard at every visible line. That review reality applies to your fence too. A black vinyl-coated chain link along a front-facing run is often a different approval conversation than bare galvanized. And in Old Town specifically, the overlay district’s expectations around front setback and scale mean we measure the line against the plat before we set a post.
The soil matters just as much. North Texas blackland clay swells and shrinks with the seasons, so post footings have to be set deep enough and cured long enough to hold through a wet spring and a dry August. Most of the homes we work on here are 1980s to 2000s brick traditional and transitional builds on generous lots, but the newer custom rebuilds often mean a fence line that has to tie into mature landscaping and existing utility easements. We plan for all of it before the first post goes in. If your project is part of a full Fence Installation in Coppell plan, or you’re also reworking the approach out front, homeowners often pair this with Concrete Driveways & Concrete Work in Coppell so the gate, apron, and fence all line up.
We cover the full Coppell area, from 75019 to 75099, and if the project grows into a larger job, our Fence Installation team handles the wider scope. Homeowners here also pair fence work with Asphalt Driveways & Resurfacing in Coppell when the driveway edge and the fence line are getting reworked together.
Serving Coppell, TX – Our Local Coverage Area
We serve Coppell and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Coppell
A standard residential chain link fence takes one to three days on site, depending on linear footage and how much old fence has to come out. Larger lots with demo, multiple gates, and review-required changes can stretch to four days. Call (844) 797-4808 and we’ll give you a realistic window for your lot, not a generic range.
In many Coppell neighborhoods, yes: HOA architectural review is required, and the city may require a permit depending on height and location. We help you assemble the review packet, including height, finish, and a plot of the fence line, so you’re not the one guessing what the board wants. Call (844) 797-4808 and we’ll tell you what your community requires before you buy anything.
In most cases, yes. A chain link fence is one of the least invasive fence types to install because the footings are small and the fabric comes in rolls. We trench along the line, set posts, and haul off the spoils. If your line runs through established landscaping or a paver border, we’ll flag that scope during the site walk. Call (844) 797-4808 for a free on-site estimate.
Most Coppell chain link fence jobs land between $3,500 and $9,000. The number moves with linear footage, whether old fence and footings need removal, gauge and finish, gate count, and how tight the access is. We put every line item in writing so you can compare bids honestly. Call (844) 797-4808 for an exact quote, and the estimate is free.
Every chain link fence we install is covered by the 730-Day Done Right Promise, which is one of the longest workmanship guarantees in residential construction. If the fence isn’t right inside that window, we make it right. Call (844) 797-4808 to schedule your free estimate and get the warranty in writing.
Get a Free Chain Link Fence Estimate in Coppell
We’ll walk your lot, measure the actual run, check your setback and HOA requirements, and hand you a written estimate the same visit, with the precise number and no change orders later. Calls are answered by a live person 24/7. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off. Call (844) 797-4808 to schedule your chain link fence estimate in Coppell.
Written by the team at Groundwork Construction Co.