Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Farmers Branch, TX: What It Costs and How Long It Takes
A chain link fence in Farmers Branch usually runs $3,500 to $9,000 for a typical residential lot, with most standard 4-foot backyard runs landing in the $4,000 to $5,500 range. Installation takes one to three days once materials are on site: one day for post setting and framework, one for mesh and tension, and a short final day for gates, concrete cure checks and cleanup. Call (844) 797-4808 for a free on-site estimate and a written line-item quote before you commit to anything.
How a Chain Link Fence Goes In, Stage by Stage
Chain link is one of the faster fence types to install, but the speed only holds when the layout is right and the posts are set properly. Here’s the real sequence we follow in Farmers Branch, and what you’ll be deciding at each step.
Day 1, morning: layout and utility locate
We walk the property line with you, confirm the fence run, gate positions and any corners, then mark it. Texas law requires a call to 811 before anyone digs, and we wait for the locate flags to clear. That locate usually takes two to three business days, so it’s the one step that can add calendar time. You’ll decide here whether the fence sits exactly on the property line or set back a few inches, which matters on narrower Farmers Branch lots near the Dallas line.
Day 1, afternoon: post holes and concrete
We auger post holes roughly 24 to 36 inches deep depending on fence height and gate posts, then set line posts in concrete. Terminal posts (corners, ends, gate posts) get larger holes and more concrete because they carry the tension. Concrete needs about 24 hours before we hang anything heavy on it. If your soil is the hard black clay Farmers Branch sits on, we widen the hole slightly so the concrete plug doesn’t shear against the clay as it moves.
Day 2: rails, mesh and tension
Top rail goes through the loop caps, tension bands go on the terminal posts, and the mesh gets stretched with a come-along and locked in with tension bars. This is the stage where quality differences show: proper tension means the mesh stays tight for years instead of sagging after the first summer. You’ll confirm gate swing direction and latch side before we hang the gates.
Day 2 or 3: gates and hardware
Walk gates get hinges, a latch and a fork latch or self-closing spring if you want one. Drive gates need heavier posts and bracing. This is where the “one trip done right” approach matters: we don’t leave with a gate that drags or a latch that doesn’t line up.
Final step: cleanup and walkthrough
We haul off spoils, rake the disturbed soil, and walk the fence with you. You check tension, gate operation and post plumb before we call it finished. Any adjustments happen that day, not on a callback two weeks later.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Options You’ll Actually Choose Between
- Height: 4-foot is the default for residential backyard runs and the cheapest per foot. 5-foot gives more privacy screening and deterrent without looking commercial. 6-foot is common where dogs jump or where the fence faces an alley or busy road.
- Gauge (wire thickness): 11.5-gauge is the residential standard and holds up fine. 9-gauge is noticeably heavier, resists denting and dog-chewing far better, and costs roughly 15 to 25 percent more in material. If you have large dogs, spring for 9-gauge.
- Coating: Galvanized steel is the budget workhorse. Vinyl-coated (usually green or black) costs a bit more but looks softer against landscaping and doesn’t leave rust streaks. Black-coated has become the most-requested finish in this market.
- Framework: Standard is a 2-inch top rail with 1 5/8-inch line posts. Heavier framework is worth it on long runs and drive gates.
- Privacy add-ons: Slat inserts (often called privacy slats) weave through the mesh for partial screening. Wind screen fabric gives near-total privacy but catches wind and shortens fence life in North Texas storms, so we’re honest about that trade-off.
- Gates: Standard 3- or 4-foot walk gates are the norm. Double drive gates need bracing and are priced higher.
What a Chain Link Fence Costs in Farmers Branch, TX
For a typical residential chain link fence in Farmers Branch, expect $3,500 to $9,000 depending on run length, height, gauge and gates. Here’s where that range splits:
| Item | Typical Range |
|---|---|
| Standard 4-ft chain link, basic backyard run | $4,000 – $5,500 |
| Larger lot or 5 – 6-ft height | $5,500 – $7,500 |
| Heavy 9-gauge, vinyl-coated, drive gates | $7,500 – $9,000 |
| Walk gate (each) | add $200 – $500 |
| Double drive gate | add $600 – $1,500 |
The variables that push a job toward the high end: total linear feet, especially on irregular lots; heavier gauge wire; vinyl coating versus galvanized; gate count and size; and site conditions like roots, rock, slopes or an existing fence that needs demo and haul-off. A written estimate should spell out linear footage, height, gauge, coating, post spacing, gate count and whether removal of the old fence is included. What’s often NOT included unless stated: permit fees, grading or regrading the fence line, and hauling off large debris like old concrete footings. Call (844) 797-4808 for an exact quote. Estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Farmers Branch Homes Specifically Do to This Job
Farmers Branch is a fully built-out inner-ring suburb with almost no new residential land, so a chain link job here almost always means working around an existing house, mature trees and landscaping rather than clearing open ground. Much of the housing stock in ZIP 75234 dates to the 1950s through 1970s, and a lot of it sits on the hard Blackland Prairie clay that swells in wet springs and shrinks in drought. That clay is the reason post installation needs attention: concrete footings can heave if they’re undersized or if water pools along the fence line. We set deeper holes and keep posts plumb against the clay movement instead of treating a fence like a weekend project. On properties near the southern edge where the lots blend toward the Dallas line, we routinely pull old failing fences that were set decades ago before the current code picture, and we plan layout around the mature pecan and oak roots those older yards are full of. Permits and utility locates both apply here; Farmers Branch enforces codes on older properties, so anything that involves a taller fence or one near a corner sight line gets checked before we dig.
Serving Farmers Branch, TX – Our Local Coverage Area
We serve Farmers Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Farmers Branch
Most residential chain link fences in Farmers Branch are installed in one to three days once materials and the utility locate are ready. The utility locate is the biggest schedule factor, so plan on adding a few business days before the crew arrives.
Farmers Branch generally requires a permit for fencing, and the specifics depend on height and placement, especially near a corner or the property line. We handle the permit and inspection as part of the job and confirm the requirements for your address before digging. Call (844) 797-4808 to sort out the permit question.
A standard 4-foot, 11.5-gauge galvanized chain link is the most affordable option that survives this climate, with the caveat that the framework and gate hardware need to be decent quality. Going with 9-gauge wire or vinyl coating adds cost but extends the fence’s life and looks better against landscaping. Call (844) 797-4808 for a quote tailored to your lot.
Yes, and it’s common in Farmers Branch. We plan the run around pool equipment, AC units and utilities so the fence line doesn’t conflict with the equipment or the underground lines. If the fence borders a pool, we confirm the barrier height meets local pool safety requirements.
Every fence we install is covered by our 730-Day Done Right Promise: if the workmanship isn’t right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it’s stated in writing, not as a verbal promise.
Get a Free Chain Link Fence Estimate in Farmers Branch
If you’re ready to price a chain link fence in Farmers Branch, call (844) 797-4808 for a free on-site estimate. We’ll walk the property line with you, measure the run, confirm height, gauge and gates, and hand you a written line-item quote with the total spelled out. No pressure, no vague bids. From the first call to final cleanup, it’s one crew and one number to call.
Written by the team at Groundwork Construction Co.