Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Dallas, TX: What It Takes and What It Costs
Concrete driveways & concrete work in Dallas typically run $4,500 – $12,000 for a new residential driveway, and most residential pours are finished in 2 to 4 days from demo to cure, weather permitting. A driveway replacement runs $5,000 – $14,000 when you’re tearing out and re-pouring instead of starting from bare ground. Call (844) 797-4808 for a free on-site estimate with a line-item quote.
Key takeaways
- New concrete driveway in Dallas: $4,500 – $12,000. Replacement: $5,000 – $14,000.
- Most pours take 2 – 4 days, with a multi-day cure before you park on it.
- Blackland Prairie clay drives two decisions here: slab thickness and reinforcement. A cheap pour will show cracking within a few Dallas summers.
- We pull the permit, coordinate any inspection, and put our 730-Day Done Right Promise in writing.
How we pour a Dallas driveway, start to finish
Concrete work rewards patience and punishes shortcuts, and Dallas clay is unforgiving to anyone who forgets it. Here’s the real sequence you’ll live through, with the decisions that land on you at each stage.
Stage 1: Site check and layout (a day, or a half day)
We walk the existing slab or bare ground with you, measure width and grade, and check how water actually drains off the property. On Dallas lots with tight side yards or an alley approach, this is where we confirm the pour will clear the fence line and the garage apron. You decide the finished width and where it meets the street.
Stage 2: Demo, excavation and base prep (1 – 2 days)
On a replacement, the old slab comes out, we haul it off, and we dig down to a compacted granular base. On Blackland clay, we bring in select fill and compact it in lifts so the slab has something stable to sit on. This is the stage that quietly determines whether your driveway looks the same in five years. You’ve already picked the driveway material and finish by now.
Stage 3: Forming, reinforcement and any permits (1 – 2 days)
We set forms to the correct grade and slope, place wire mesh or rebar, and get the permit sign-offs where the scope calls for them. If there’s a driveway widening or new approach cut, we handle that before the pour, not after. You’ll confirm any finish choice (broom, exposed aggregate, a simple saw-cut joint pattern) before forms close.
Stage 4: The pour and finish (one day)
Concrete arrives early, gets placed, screeded and floated, then finished to the texture you chose. We cut control joints into the slab at the right spacing so cracks land where they’re supposed to. On a hot Dallas afternoon we’re working fast on finish and curing compound, because finishing too late leaves a rough surface that no amount of cleanup fixes.
Stage 5: Cure and walkthrough (multi-day)
You stay off it for 24 – 48 hours, keep heavy vehicles off longer, and we come back for a final walk with you. We point out the joints, any minor surface variations, and how to keep water moving away from the slab. That final walkthrough is when we hand over the warranty paperwork and the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Most of the decisions in a Dallas concrete driveway come down to a handful of real trade-offs. Here’s what actually matters.
- Slab thickness (4-inch vs 5 – 6-inch): A 4-inch slab handles light residential traffic fine. If a heavy truck, trailer or regular RV traffic crosses the driveway, go 5 – 6 inches. That’s a modest line-item bump and usually the best money you’ll spend.
- Reinforcement (wire mesh vs rebar): Mesh is the lower-cost default and gives reasonable crack control. Rebar costs more and holds up better against Dallas clay movement and heavier loads.
- Finish: A standard broom finish is the budget choice and the safest surface when wet. Exposed aggregate gives better grip and texture and costs a bit more. Broom is usually the right call for the driveway if you’re watching the budget.
- Joints and sealing: Control joints keep cracks where you want them. A sealer adds a few hundred dollars and slows moisture loss and staining.
- Drainage details: If the driveway pitches toward the house or garage, we add a swale or a channel drain, and that’s a real line item, not a rounding error.
What Concrete Driveways & Concrete Work costs in Dallas, TX
Most residential jobs land in the $4,500 – $12,000 range for a new concrete driveway, and $5,000 – $14,000 if you’re replacing an existing slab. Here’s how the number breaks out and what pushes a job toward either end.
| Line item | Typical Dallas range |
|---|---|
| New concrete driveway installation | $4,500 – $12,000 |
| Full driveway replacement (demo + re-pour) | $5,000 – $14,000 |
| Driveway widening or new approach | Quoted to scope |
| Driveway sealing (maintenance) | $250 – $700 |
The variables that move the price: size (a long rural-style approach vs a standard city driveway), existing condition (demo and haul-off on a failed slab), reinforcement and thickness, drainage work (swales, drains, grade correction), and permit scope for an approach or right-of-way cut. A written estimate lists excavation, base, reinforcement, forming, pour, finish and haul-off separately, so you see where the money goes. Haul-off of old concrete, curbs and landscaping repair are the usual items a cheap bid leaves off, so ask.
See the difference
Before
After
Before
After
Before
AfterWhat Dallas homes specifically do to this job
Dallas sits on expansive Blackland Prairie clay that swells and shrinks with every wet-dry cycle, and that changes how a driveway has to be built here. In older Oak Cliff and East Dallas neighborhoods, the pier-and-beam bungalows and the slab-on-grade 1950s – 70s ranch homes often have driveways that cracked years ago because the base wasn’t prepped for soil movement. We see it all the time: a slab poured too thin over uncompacted clay, then stair-step cracking and a sunken apron after a few dry summers. Our answer is a deeper compacted granular base, the right reinforcement, and control joints placed for the way Dallas clay behaves. The city ties some foundation and structural work to engineered plans and permits, and we route anything structural, like an approach or a load-bearing change, through that same permitting review. DFW’s severe spring hail and straight-line windstorms don’t hurt concrete slabs, but they do drive choices nearby, so we’re thinking about integration through the whole site, not just the pour in isolation. We work Dallas driveways throughout the city and nearby Highland Park, University Park, Duncanville and Irving, and part of a full Driveway & Pavers in Dallas project when a homeowner wants hardscape and concrete in one go. When the scope widens, it’s our Driveway & Pavers service that pulls those pieces together.
Serving Dallas, TX – Our Local Coverage Area
We serve Dallas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Concrete Driveways & Concrete Work in Dallas
Most Dallas concrete driveways are finished in 2 to 4 days, followed by a multi-day cure, with small pours moving fast and larger replacements or drainage work stretching toward the longer end. Call (844) 797-4808 for an exact timeline on your property.
Permits are typically required when a project touches the right-of-way, a new approach, or structural work, while a routine replacement on your own property often doesn’t. We handle the permit paperwork and inspections for the Dallas jobs that need them, so call (844) 797-4808 and we’ll tell you what your scope triggers.
No. We quote upfront and put the number in writing, and the figure is what you pay unless you ask for a scope change. That’s our no-hassle pricing, and it’s why we do a thorough site check before the quote goes out. Call (844) 797-4808 for an exact quote, free.
Often, yes, especially on a straight replacement where grade and drainage already work. But if the driveway pitches toward your garage or the base is failing, correcting grade and drainage is part of doing it right. We’ll tell you on the estimate which camp your Dallas property is in. Call (844) 797-4808 to schedule a walk-through.
Every concrete project we do is covered by our 730-Day Done Right Promise, so if something isn’t right, we come back and fix it. You’ll get the warranty in writing at the final walkthrough. Call (844) 797-4808 to get your estimate started.
Get your Dallas concrete driveway estimate
Call (844) 797-4808 for a free on-site estimate on concrete driveways & concrete work in Dallas. A live person answers around the clock, and we’ll set a time to walk your property, measure the pour, check drainage and talk through finish options. You leave the visit with a written, line-item quote and a realistic timeline, and you’ll know exactly where the $1,000 off projects over $10,000 applies. Some Dallas homeowners also pair the job with a New Detached ADU in Dallas or a Garage Conversion ADU in Dallas, and we scope those together when it makes sense. You’ll find us across Dallas, so call and let’s get your driveway on the books.
Written by the team at Groundwork Construction Co.