Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fence Repair in Dallas, TX: What It Costs and How Long It Takes
Fence repair in Dallas typically runs $3,500 to $9,000 for the storm-damage and wind-load work we see most, and most repairs are completed in one to three visits depending on how many posts and panels are involved. The typical job here is post-and-panel replacement after a spring straight-line wind event, leaning fence lines on shifting Blackland clay, or gate and hardware failures on aging cedar. Call (844) 797-4808 and we’ll schedule a free on-site estimate. You’ll get a written line-item quote before anything comes down.
How We Run a Fence Repair Job, Stage by Stage
Fence repair isn’t a one-day drop-in. It’s a sequence, and the sequence is what keeps the repair from failing again next spring.
Stage 1 – On-site assessment (about 45 to 60 minutes). We walk the line, check every post for rot at the soil line and plumb, and look at panel racking. On Dallas clay, posts that were set too shallow show lean first. We map which posts are salvageable and which have to come out, then give you a written scope with a fixed number. You decide the repair-versus-replace call here, and we’ll tell you plainly when a full rebuild is cheaper over five years.
Stage 2 – Demolition and post extraction (half a day on a typical 60- to 120-foot run). We pull damaged panels and dig out failed posts. On an older pier-and-beam property, we’re careful around buried irrigation and low-voltage lines, which we mark before digging. You don’t have to move anything; we handle the takedown and haul-off.
Stage 3 – Post setting and footing (one to two days, mostly cure time). New posts go in with concrete footings set below the active soil zone so seasonal movement doesn’t rack the fence. This is the stage that decides whether the repair holds. You’ll choose post material here: cedar, pressure-treated pine, or a steel post-and-rail system that resists clay movement better than wood.
Stage 4 – Panel and gate reassembly (one day). We hang panels, true the line, and set gates with adjustable hinges and a proper latch. Gates get extra attention because sagging is the single most common call-back on a wood fence. Most jobs are completed in a single visit once materials are on site.
Stage 5 – Final walkthrough and warranty paperwork (30 minutes). We walk the line with you, confirm the gate swings clean, and hand over the written coverage under our 730-Day Done Right Promise. If anything isn’t right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Matter on a Repair
A repair forces real decisions. Here’s what you’ll weigh, and the honest trade-off on each.
- Cedar vs. pressure-treated pine: cedar takes Dallas sun and humidity well and looks the part on older East Dallas and Oak Cliff properties, but it costs more per linear foot. Treated pine is cheaper but checks and warps faster under our summer heat.
- Steel vs. wood posts: steel post-and-rail with a wood skin resists the swelling clay far better than any wood post, at a higher upfront cost. It suits long runs where you’re tired of re-setting leaning posts.
- Full-panel replacement vs. board-level patch: patching individual pickets is the cheapest fix and fine for cosmetic damage. After a wind event, though, a racked panel usually needs replacing whole because the rails have lost their fastening.
- Wind-rated fasteners and bracing: hurricane-rated screws, metal panel clips, and diagonal bracing cost more but are the difference between a fence that stands through a May hail-and-wind storm and one that goes flat. If you’re pricing the wider project, that decision lives inside a full Fence Installation in Dallas.
- Gate hardware: adjustable, self-closing hinges and a heavy-duty latch add a modest amount but kill the sag-and-drag problem that wears out gates first.
We work with a curated set of verified material partners, so you’re choosing quality, not just what’s in stock. Where the repair crosses into window and door trim near a fence line, some Dallas homeowners also ask about impact-rated systems from brands like ES Windows and ECO Window Systems; that’s a separate scope and we’ll tell you so.
What Fence Repair Costs in Dallas, TX
Fence repair in Dallas generally lands between $3,500 and $9,000, with the number set by how many posts and panels need replacing and what grade of material you choose. A single-section wind-damage repair sits at the low end; a full post-and-panel rebuild on a long run pushes toward the high end. A few variables move the number most:
- Size and length of the damaged run: the more linear feet and posts involved, the more labor and material.
- Condition of what’s left standing: rot at the soil line can force more posts out than the storm damaged.
- Material grade: cedar and steel post systems cost more than treated pine.
- Buried obstructions: irrigation, low-voltage lighting, or old footings add digging and disposal time.
- Gate rebuilds: gates carry more hardware and framing than a straight run and cost accordingly.
A written estimate lists posts, panels, footing concrete, fasteners, gate hardware, demolition, haul-off, and labor line by line. Excluded are anything unrelated to the fence itself, like landscape restoration or root removal beyond the line. Upfront pricing, no surprises means the number you see is the number you pay, with no change orders for the work we quoted. Financing is available at 0% for 18 months, and projects over $10,000 take $1,000 off.
See the difference
Before
After
Before
After
Before
AfterWhat Dallas Homes Specifically Do to a Fence Repair
Dallas sits on Blackland Prairie clay, those expansive vertisols that swell when wet and shrink hard through a dry summer. That movement is why so many fences here lean and rack long before the wood rots. A post set too shallow in this soil will lift and lean within a couple of dry seasons, so footing depth is the first thing we check on any Dallas repair. The soil is also why the city treats engineered plans and inspections as routine on structural work; fence repair itself usually doesn’t require a permit, but if a repair ties into a retaining wall or a shared property line dispute, we’ll tell you when to pull one. Our Dallas coverage reaches the pre-war bungalows of Oak Cliff and East Dallas, where original pier-and-beam lots have older, buried lines, and the 1950s-to-1970s slab ranch tracts where fences take the full force of spring straight-line winds across an open backyard. The failure modes repeat: racked panels after a May storm, gates that drag by July, and posts heaved out of line on the clay. HOA rules in planned communities also govern fence height, style, and visibility for the rebuilt run, so we check those before we set a post.
Serving Dallas, TX – Our Local Coverage Area
We serve Dallas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Fence Repair in Dallas
Most fence repairs in Dallas are completed in one to three visits; a single-section fix can be done in a day, while a longer post-and-panel rebuild may span half a day of demolition, a day or two for footing cure, and a day for reassembly. Call (844) 797-4808 for a timeline on your property – estimates are free and you’ll get a date, not a maybe.
Straight repair and replacement of fence sections typically does not require a city permit, but work tied to a retaining wall, a shared boundary, or a new fence line may fall under HOA or city review. We’ll flag it on the estimate if a permit or inspection applies to your job.
Yes. Most Dallas fence repairs we do are partial: replacing the damaged posts and panels and leaving sound sections in place. We’ll tell you honestly when a partial repair will just mean a second call next season, and when salvage is the smarter buy.
Fence repair in Dallas runs $3,500 to $9,000, depending on linear footage, post count, material grade, and gate work, with a single-section fix at the low end. Call (844) 797-4808 for an exact quote – estimates are free and written line by line.
Every fence repair we do in Dallas is backed by our 730-Day Done Right Promise: if the workmanship isn’t right, we make it right for two full years. That covers the labor and installation on posts, panels, and gates we set, in writing.
Get a Free Fence Repair Estimate in Dallas
If a Dallas storm took panels down or settling clay has your fence line out of true, call (844) 797-4808 to schedule a free on-site estimate. We’ll walk the fence, show you what’s repairable, and hand you a written line-item quote with a fixed number. A live person answers around the clock. When you’re ready to plan the whole line rather than patch it, that’s our Fence Installation service – and homeowners rebuilding the backyard often pair this with ADU Design & Permitting in Dallas or a Garage Conversion ADU in Dallas.
Written by the team at Groundwork Construction Co.