Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Driveway Repair & Replacement in Grand Prairie: What It Actually Takes
Most driveway repair and replacement work in Grand Prairie runs $5,000 – $14,000 for a full tear-out and pour, and a single 8 to 14 day stretch from demo to cure. Crack and settle repairs on an existing slab usually fall well below that and finish faster. Call (844) 797-4808 and we’ll walk the drive with you and put the number in writing before anyone touches a shovel.
How we run a driveway repair or replacement, start to finish
A replacement isn’t a one-day pour. Here’s the sequence we follow, and what you’ll be deciding along the way.
Stage 1 – Site evaluation and layout (day 1)
We measure the drive, check slope and drainage away from the house, and test the condition of what’s underneath. On older Grand Prairie slabs that means confirming whether the base is compacted fill or the native Blackland clay. You decide here whether we’re repairing sections or replacing the whole run, and we mark the layout with you present so the apron, flare, and any widening match what you pictured.
Stage 2 – Demo and haul-off (days 1 – 2)
Concrete comes out by saw-cut and break-out; asphalt gets planed or broken depending on depth. Debris leaves the same week it comes up. Expect the driveway to be unusable for the duration – we’ll tell you up front so you can park on the street and move anything that blocks the path.
Stage 3 – Base prep and grading (days 2 – 4)
This is where the job is won or lost. We excavate to depth, re-compact the subgrade, and bring in select fill and gravel base built up in lifts. Drainage gets corrected at this stage so water sheds away from the foundation instead of pooling at the garage door. You’ll approve the base before we form.
Stage 4 – Forming, rebar, and inspection (days 4 – 6)
Forms go in, rebar or mesh gets tied on chairs so it sits mid-slab, and the pour gets scheduled. Where a permit applies, this is the inspection window, and nothing gets poured until it clears. Your decision point: finish and control-joint layout, so the slab cracks where you want it to and not where you don’t.
Stage 5 – Pour, finish, and cure (days 6 – 14)
Placement and finish happen in one pass; control joints get cut the same day on concrete. The slab then cures for several days before you drive on it – typically 7 days for light use, longer before heavy trucks. We do a final walkthrough and hand over the written warranty on the workmanship before we clear the site.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Once we’ve walked the site, most homeowners are choosing between a handful of real paths. Each carries a different price and a different lifespan.
- Sectional concrete repair: Cut out the failed panels, re-pour, and tie back to the sound slab. Cheapest path when the failure is localized and the base under the good sections is holding.
- Mudjacking or slab lifting: Pump grout under a settled slab to raise it back to grade. Works when the concrete is intact but the base has dropped; doesn’t fix cracked or spalled panels.
- Full concrete replacement: The standard path for a drive that’s cracked through in multiple places. Reliable, familiar, and holds up when the base is built right.
- Pavers over a repaired base: Atear-out and re-base followed by a paver surface. Higher upfront cost, easier to lift and reset a single paver later, and it holds finish better through freeze-thaw movement. This is where a paver-grade product line like Belgard is worth looking at if the base is already coming out.
- Asphalt resurfacing or new asphalt: The lower end of the cost spectrum. Needs a solid base and annual sealing to stay tight; surface drinks up sun and softens in a Dallas summer.
If the project grows past the drive itself – a widened approach, a new walkway, a patio at the same grade – that scope lives on our Driveway & Pavers in Grand Prairie page.
What Driveway Repair & Replacement costs in Grand Prairie, TX
Here’s what the numbers look like in this market, line by line.
| Job | Typical range |
|---|---|
| Driveway replacement (full tear-out and pour) | $5,000 – $14,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt paving | $3,500 – $9,000 |
| Paver driveway installation | $7,000 – $18,000 |
| Sealing (maintenance) | $250 – $700 |
Four variables push a job from the low end to the high end. Square footage is the first and biggest. Existing condition is the second – a drive with a failing base costs more to fix than one with sound subgrade. Access matters: a narrow side-yard approach or a drive that can’t take a full-size truck slows demo and adds labor. And material grade – thicker slab, higher PSI concrete, rebar vs. mesh, paver vs. concrete – swings the number meaningfully.
A written estimate from us itemizes demo, base depth, rebar and thickness, drainage correction, and haul-off. What it typically won’t cover: landscape repair if we had to drive equipment over plantings, or any work outside the drive itself. Upfront pricing, no surprises – when we quote, that’s the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Grand Prairie homes specifically do to this job
Grand Prairie sits on two counties and some of the most aggressive expansive clay in North Texas, and that combination shapes every driveway we touch here. The same slab can be in Dallas County on one side of the yard line and Tarrant County on the other, so permitting and inspection can run through more than one set of rules depending on which side of the property you’re working. The Blackland clay under everything in 75050 and 75051 swells and shrinks with the drought-to-deluge cycles we get, and the drive slabs in those older post-war blocks are the ones that show it first – longitudinal cracks, settlement at the apron, and joints that have pulled apart. In the 1990s and 2000s subdivisions out toward 75052 and 75054, the concrete is newer but the grading is often pitched slightly wrong, so water sits against the garage and works its way under the slab.
We work everything from the original one-car drives on those mid-century ranches to wide three-car aprons in the newer tracts. On houses that have already been leveled once, we take extra care with grade so the drive drains away from the repaired foundation.
Serving Grand Prairie, TX – Our Local Coverage Area
We serve Grand Prairie and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Driveway Repair & Replacement in Grand Prairie
A full replacement runs 8 to 14 days from demo to cure, with the slab usually pourable by day 6 and drivable after a week of cure. Sectional repairs can finish in 2 to 4 days. Call (844) 797-4808 for a timeline on your specific drive – estimates are free.
Replacement usually requires a permit and an inspection on the base before the pour; sealing and most spot repairs don’t. Grand Prairie straddles Dallas and Tarrant counties, so we confirm which jurisdiction handles your address before we form. Call (844) 797-4808 and we’ll sort out the permit question for your property.
Often yes. If the failure is localized and the surrounding panels are sound, a sectional repair runs a fraction of a full replacement. We only recommend the full tear-out when the base has failed across most of the drive. Call (844) 797-4808 to schedule a free walk-and-quote.
Full replacement runs $5,000 – $14,000; concrete-only installation sits at $4,500 – $12,000; asphalt paving runs $3,500 – $9,000; and paver installation comes in at $7,000 – $18,000. Sectional repairs land below those on almost every job. Call (844) 797-4808 for an exact quote – estimates are free.
Every driveway we build is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s on the workmanship, and it’s in writing. Call (844) 797-4808 to talk through warranty coverage on your project.
If the driveway work is part of a bigger picture – a garage being converted, or a detached unit going in out back – homeowners often pair this with ADU Site Prep & Utilities in Grand Prairie or a Junior ADU & Interior Conversion in Grand Prairie. You can see the full scope of our Driveway & Pavers work, and if you’re in Grand Prairie, that’s our territory – you can reach us through the Grand Prairie service-area page any time.
Get a free on-site estimate for your Grand Prairie driveway
Call (844) 797-4808 and we’ll walk the drive with you, test the base, and put a line-item estimate in writing – free, no pressure. A live person answers 24/7, and you’ll know exactly what the job involves, what it costs, and how long it takes before you commit. Proudly covered by our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.