Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fence Repair in Highland Park, TX: What It Takes
Fence repair in Highland Park, TX typically runs $3,500 – $9,000, and most jobs wrap in two to four days once the scope is set. That price covers pulling failed pickets and posts, resetting or replacing footings that clay movement has pushed out of line, and matching new stock to an existing run. Call (844) 797-4808 and we’ll walk your line with you before anything is quoted.
Here’s the part that surprises most homeowners: the fence on a 1920s lot along Lexington or Beverly usually isn’t a single fence. It’s three or four stretches built in different decades, each failing for its own reason.
Key Takeaways
- Most fence repair in Highland Park lands between $3,500 and $9,000, with small stretch repairs well under that.
- Expansive clay and mature trees, not age alone, cause most of the failures we see.
- Town permitting and lot-line scrutiny shape how a repair gets planned and sequenced.
- Our written estimates are line-item, and the price we quote is the price you pay.
How We Handle Fence Repair, Stage by Stage
Every job follows the same five stages. What changes is how long each one runs, and that depends entirely on what we find once the first post comes out.
Stage 1: Walk and Mark (about an hour on site)
We walk the full fence line with you and mark every failing post, racked panel, and loose picket with flagging tape. You decide right then which stretches get repaired and which get the full project treatment. If the wider scope is coming into play, that’s the moment we fold in Fence Installation in Highland Park into a single scope instead of patching something you’ll replace next spring.
Stage 2: Footings and Grade (day one, half to full day)
Posts come out, and we inspect the concrete below them. On clay, a footing that heaved two inches over the winter won’t hold a new post straight, so the hole gets widened, re-poured, and set with a fast-curing mix like Quikrete. Where the town tree canopy has pushed roots against the line, we hand-dig to protect the root structure.
Stage 3: Structure and Framing (day two)
Rails get checked for rot at the fastener line, the spot water actually collects. Rot there means replacement, not a splice. This is your decision point on lumber grade and whether to step up to a species that handles our summer heat better.
Stage 4: Boards, Pickets, and Finish (days two and three)
New pickets or boards go up to match the existing run in height, profile, and spacing. Where a run mixes eras, we match the section being repaired rather than the fence as a whole, so the new work disappears into the old.
Stage 5: Gate, Hardware, and Walkthrough (final half day)
We adjust gates, replace sagging hinges and latches, then walk the line with you and show what was done. Written notes on what’s covered and what isn’t go with you when we leave.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make
Fence repair leaves less room than installation for creative decisions, but there are still real forks in the road. Here’s how they shake out.
- Patch vs. rebuild a run. Patching a single stretch runs a fraction of a rebuild. If more than about a third of a run has failed, rebuilding the run costs closer to the high end but buys you another couple of decades.
- Cedar vs. pressure-treated pine. Cedar handles North Texas sun and moisture swings better and costs noticeably more. Pine is the practical choice when you’re matching an existing pine fence that still has years left.
- Post material. Steel posts cost more up front and resist soil movement far better on clay than wood posts do.
- Concrete mix. Standard ready-mix works for most residential footings; a faster-setting bagged mix like Quikrete saves a set day on tight schedules.
- Match the old or modernize. Matching keeps the run visually seamless. Modernizing a stretch only makes sense if you can see the seam coming from a block away.
What Fence Repair Costs in Highland Park, TX
Most fence repair in Highland Park lands between $3,500 and $9,000 for a full job. Smaller stretch repairs come in below that, and large multi-run projects push toward the top of the range. Five variables move the number:
- Linear footage. The single biggest lever. Each additional run of failing fence adds labor, material, and disposal.
- Post and footing condition. Rotten or heaved footings on clay mean more excavation and more concrete.
- Fence age and material. A 30-year-old pine run often needs a full section rebuild rather than a board swap.
- Access and lot constraints. Narrow lots under live oak canopy slow material handling, and any street closure coordination adds schedule.
- Matching the existing material. Custom picket profiles or old lumber sizes cost more than standard stock.
Your written estimate lists every line: footage, materials, footing work, disposal, gate hardware, and permits if any apply. What it doesn’t include is any surprise. No change orders after the fact. If we open a hole and find something we didn’t see, we stop and quote it before doing anything else.
See the difference
Before
After
Before
After
Before
AfterWhat Highland Park Homes Do to Fence Repair
Highland Park is a nearly fully built-out enclave of century-old homes on small lots, and construction here means renovation, addition, or teardown-rebuild under strict town oversight. That matters for a fence in three specific ways.
First, permitting. Highland Park operates under Town of Highland Park rules rather than Dallas codes. A simple like-for-like repair usually doesn’t trigger a permit, but any change to fence height, location, or lot-line alignment does, and the approval process runs on the town’s own timeline. We check before we start, not after.
Second, trees. The mature pecan and live oak canopy over narrow streets means material deliveries often need a tree-protection plan and street coordination. That’s real schedule time.
Third, the ground itself. North Texas expansive clay and foundation movement are the main drivers of fence failure we see on blocks like Armstrong Parkway and along Lakeside Drive. Posts heave, rails rack, and the gate stops latching within a single hot summer.
We work fence repair throughout the ZIP 75205 area and can cover the whole Highland Park footprint. If your repair is part of a bigger exterior push, some homeowners pair this with ADU Design & Permitting in Highland Park or Garage Conversion ADU in Highland Park, and we’ll scope those together to avoid tearing up the same ground twice. Our Fence Installation team handles the full-replacement side when repair stops making financial sense.
Serving Highland Park, TX – Our Local Coverage Area
We serve Highland Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Repair in Highland Park
Most fence repair jobs in Highland Park run two to four days from first walk to final gate adjustment. Small stretch repairs can finish in a single day. If the town permitting office needs to review a height or lot-line change, add their review window to the front of the schedule. Call (844) 797-4808 for a realistic timeline on your specific line.
A like-for-like repair on the same footprint usually doesn’t require a permit. Any change to height, location, or lot-line position does, and Highland Park processes those under town rules rather than Dallas codes. We verify the requirement for your address before scheduling. Call us and we’ll tell you what applies to your property.
Yes. Post replacement can be done without trenching the whole line, and we hand-dig around mature trees to protect root systems. The one compromise is a concrete footing that has fully heaved, which needs a wider hole to reset correctly. Call (844) 797-4808 to schedule a walk and we’ll show you exactly where that applies.
Repair wins when less than roughly a third of the footage has failed and the posts are still holding. Past that threshold, a full replacement makes more sense financially. We’ll give you both numbers in the same written estimate so you can compare. Call for a free on-site estimate.
Our fence repair work is covered by the 730-Day Done Right Promise, which is among the longest workmanship guarantees in residential construction. If something we repaired fails within that window, we come back and make it right. Call (844) 797-4808 for the details on your job.
Get a Free Fence Repair Estimate in Highland Park
Call (844) 797-4808 and a live person answers, day or night. We’ll ask a few questions about your fence, then schedule a free on-site estimate. You’ll get a written line-item quote, background-checked technicians who show up in uniform, and a number that doesn’t move once work starts. Straight answers, and the 730-Day Done Right Promise behind the work.
Written by the team at Groundwork Construction Co.