Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Garage Doors in Irving: What the Job Actually Involves
Impact garage doors in Irving usually run $2,800 to $7,500 installed for a single door, and most replacements are finished in one long day once the door and hardware are on site. An impact-rated door is built to hold up against hail and wind-driven debris common in North Texas storms, and it pairs a reinforced door panel with heavier springs, tracks, and hinges rated for the added weight. Call (844) 797-4808 for a free on-site estimate.
How We Run an Impact Garage Door Replacement
Garage door springs and the door’s weight are genuinely dangerous. A wound torsion spring holds enough stored force to break a bone, and the cables under tension can whip. We don’t publish DIY steps for this job, and we don’t recommend anyone attempt it. What follows is the sequence we follow, so you know what to expect and when you’ll be asked to make a call.
Stage 1 – the on-site measure and structural check (about 45 minutes). We measure the opening, check the header above the door for sag or rot, inspect the jamb boards, and confirm the ceiling height and headroom you have for the torsion assembly. In older South Irving homes we also look at whether the original opening is square; 1950s and 1960s garages often aren’t, and an out-of-square opening needs trim work before a new door goes in clean. You decide the door series and finish after this visit, not during it.
Stage 2 – ordering and lead time (typically 2 to 4 weeks). Impact-rated doors in a non-standard or color-match finish often carry a longer factory lead than standard steel. We confirm the delivery window in writing before you commit. You’ll lock in color, window style, and whether you want a belt-drive opener upgrade at this point.
Stage 3 – removal and old-hardware assessment (2 to 3 hours on install day). The old door comes down, and the springs and cables come off with the proper winding bars and restraint. If the original hardware is legacy steel and the tracks are bent or rusted, we replace the whole track-and-hinge set rather than reusing anything. That’s a decision we’ll bring to you with a price before we proceed.
Stage 4 – install and balance (4 to 6 hours). New tracks go up plumb, the door panels stack and align, the torsion spring is wound to spec for the new door weight (impact doors are heavier, so the spring must be matched, not reused), and the opener is set with a proper force and travel calibration. We test the safety reverse and the photo-eye at the end.
Stage 5 – final balance check and walkthrough (about 30 minutes). We balance the door, run it several times, show you the manual release, and confirm the opener limits. Expect one door done in a single visit, two doors in one long day. Most jobs are completed in a single visit once the door is on site.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Irving Impact Garage Doors
Here’s the honest trade-off on the choices that actually change the number.
- Insulated steel impact door: the most common pick for Irving homes. A polyurethane- or polystyrene-core steel door holds up to hail, resists rust, and keeps the garage cooler in summer. Runs to the low-to-mid end of the range. Polystyrene is the cheaper core; polyurethane insulates better for a few hundred more.
- Insulated aluminum or composite impact door: lighter and fully rust-proof, and a good fit for the Las Colinas and Valley Ranch subdivisions where a heavier steel door might strain an older opener. Push toward the high end of the range.
- Full-view or window-heavy impact door: a statement face for a front-facing garage, but glazing must be impact-rated too, and every pane is a cost line. Suits mid-to-high-end rebuilds. Skip it on a door facing a service alley.
- Spring and hardware grade: impact doors weigh materially more than a standard door, so the torsion spring, cables, and hinges must be rated for that weight. Reusing an old standard-rated spring on an impact door is a fast path to failure. This is a real line item, not an upsell.
- Opener upgrade: a belt-drive opener with a proper force setting handles the added door weight quietly. If your existing opener is 15-plus years old, plan to replace it during the install; pairing the two saves a second visit.
What Impact Garage Doors Cost in Irving, TX
Plan on $2,800 to $7,500 for a single impact-rated door installed, and roughly double for a two-door garage. Standard-grade doors anchor the low end; insulated aluminum, window-heavy faces, and a fresh opener push toward the top.
What moves the number up or down:
- Door size and count: a standard single is the benchmark; oversized and double doors climb quickly.
- Existing opening condition: a sagging header or out-of-square opening adds framing and trim carpentry. Older Irving garages hit this more than newer ones.
- Hardware grade: new tracks, hinges, and a matched torsion spring for impact-door weight are real costs a bare-bones quote may leave out.
- Material and glazing: steel sits at the base; aluminum, composite, and glazed doors sit at the top.
- Opener replacement: add a belt-drive opener and its wiring if the old one won’t carry the heavier door.
A written estimate from us is line-item and fixed: the door, hardware, opener, disposal of the old door, and labor are all spelled out, so the number you see is the number you pay. It doesn’t include drywall or paint repair on the interior wall if the opening needs framing changes, or HOA architectural review fees, both of which we’ll flag before work starts. Every job is backed by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Irving Homes Specifically Do to This Job
The housing stock here splits the work into two very different conversations. In the mid-century core around old downtown, the Hospital District, and South Irving (the 75060 and 75061 ZIPs), we’re regularly replacing original one-piece tilt-up doors and early sectional doors on 1950s to 1970s brick-veneer ranches that have outlived every part on them. Those doors sit on legacy steel tracks with springs sized for a much lighter original door, so a like-for-like swap rarely works; the tracks and spring have to match the new door weight or the door will drag. On the Las Colinas, Valley Ranch, and 75063 corridor, we’re working on 1980s to 2000s subdivision product where the door is newer but the opener and hardware are aging out. The clay soils under both zones also matter: an out-of-level slab or a shifted grade can throw a door out of square over time, and that shows up as a door that binds near the top of travel. We cover Irving door to door, and we’re often called after a hail event pushes a homeowner to upgrade to something rated for it. Many of these replacements come up alongside fresh paving, and homeowners often pair this with Paver Driveways in Irving or new Concrete Driveways & Concrete Work in Irving for a clean, finished front elevation.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Impact Garage Doors in Irving
One door is typically done in a single visit, usually 6 to 8 hours once the door and hardware are on site. Factory lead time on impact-rated doors is often 2 to 4 weeks, more for a color-match or custom face. We confirm the delivery window in writing before you commit. Call (844) 797-4808 to get the timeline for your door.
A like-for-like door swap on an existing garage usually doesn’t need a structural permit; anything that changes the opening, header, or framing does. We’ll tell you up front which category your job falls into and pull anything the City of Irving requires. None of that is buried in the quote. Call (844) 797-4808 to schedule your free estimate.
Yes, in most cases. A replacement that fits the existing opening doesn’t move structure, plumbing, or electrical. We only open up framing when the original header sags or the opening is badly out of square, which is more common on the postwar South Irving ranches. You’ll see that cost before we start.
Expect $2,800 to $7,500 for a single insulated impact door installed, with a two-door garage around double that. Aluminum, composite, glazed faces, and a new opener move the price toward the top. Call (844) 797-4808 for a line-item quote – estimates are free.
Every job we do is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. The door and opener also carry their own manufacturer warranties, which we pass to you in writing. Our technicians have up to 12 years of experience on garage door and entry installs.
Get a Free Estimate on Impact Garage Doors in Irving
If a legacy garage door is dragging, dented, or past its service life, we’ll come measure the opening, check the header, and hand you a fixed line-item estimate for a replacement that suits an Irving home. Our technicians are background-checked and arrive in uniform, and our phones are answered by a live person, 24/7. Whether it’s the door alone or part of a full Windows & Doors in Irving upgrade, we can walk the whole scope with you. Call (844) 797-4808 to schedule your free estimate, and we’ll go over options and timing. You can also explore our broader Windows & Doors service.
Written by the team at Groundwork Construction Co.