Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in Farmers Branch, TX: What It Costs and How It Holds Up
A wrought iron fence in Farmers Branch typically runs $3,500 to $9,000 installed, depending on linear footage, height, and whether you choose true wrought iron or a welded steel look-alike. Most residential runs take two to four days from layout to final coat. Call (844) 797-4808 and we’ll walk your property line with you and put a real number in writing.
How We Build an Iron Fence in Farmers Branch, Start to Finish
Every run follows the same five stages. Here’s what happens and when, so you know exactly what you’re paying for.
Stage 1: Site walk and layout (day 1, about an hour). We mark the property line against your survey, confirm where utilities run, and flag anything underground that changes post spacing. You decide the fence height and gate placement here. This is the stage where most surprises get caught, not after the concrete is poured.
Stage 2: Setting posts (day 1 into day 2). We dig each post hole to depth, set posts in concrete, and check plumb and line as we go. Posts cure overnight before any panels go up. On Farmers Branch’s expansive clay, post depth and footer size matter more than most homeowners realize. A shallow post that holds in dry August will lean by the next wet spring.
Stage 3: Panel and picket installation (day 2 into day 3). Rails and pickets go up, spacing gets checked against code, and gates get hung and adjusted. You confirm the gate swing direction and latch style before we finalize.
Stage 4: Finishing and touch-up (day 3). We touch up welds, check every fastener, and apply finish coats where needed. Powder-coated panels arrive finished; site-welded joints get a matching touch-up coat.
Stage 5: Walkthrough (day 3 or 4). We walk the full run with you, demonstrate the gate hardware, and hand over care instructions. Any punch-list items get scheduled before we leave. Every job is backed by our 730-Day Done Right Promise, so if something shifts or loosens, we come back and fix it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Iron Fence Options You’ll Choose Between
Iron isn’t one product. The choices below are the ones that actually change how your fence looks and how long it lasts.
- True wrought iron vs. welded steel. True wrought iron is the traditional material, heavier and more expensive, and increasingly rare on residential jobs. Welded steel is what most homeowners actually buy. It’s strong, takes a powder coat well, and costs less. We’ll tell you honestly which fits your budget and goals.
- Powder-coated vs. painted finish. Powder coating is baked on, resists chipping and rust, and holds color far longer. Field painting is cheaper upfront but needs recoating every few years in North Texas sun. We recommend powder coat for anything you plan to keep.
- Picket spacing and height. Standard residential heights run 4 to 6 feet. Tighter picket spacing costs more per linear foot but improves privacy and pet containment. You decide the balance between look and function.
- Gate automation and hardware. Manual gates are the default. Self-closing hinges, keyed latches, and powered openers are add-ons. Decide this at layout, not after the posts are set.
- Decorative elements. Finials, scrollwork, and custom panels add character and cost. Keep it consistent along the whole run or the fence looks pieced together.
For the wider project, this is often part of a full Fence Installation in Farmers Branch scope that also covers other fencing on the property.
What an Iron Fence Costs in Farmers Branch, TX
For a typical residential run in Farmers Branch, expect $3,500 to $9,000. That covers material, labor, concrete, and cleanup. Here’s what moves the number up or down:
- Linear footage. The biggest driver. A 60-foot front run sits near the low end; a full-perimeter job pushes toward the high end.
- Material grade. Welded steel and powder coat land mid-range. True wrought iron and heavy custom scrollwork push toward the top.
- Height and picket spacing. Taller fences and tighter picket spacing mean more material and more labor per foot.
- Gates. Each gate adds cost. Automation and custom hardware add more.
- Site conditions. Slopes, existing fence removal, and hard digging conditions all add labor. On the clay in this part of Dallas County, rocky or compacted ground slows post setting.
Every estimate is written line by line, and the number you see is the number you pay. No change orders after the fact. If you want financing, we offer 0% for 18 months and $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat Farmers Branch Homes Do to This Job
Farmers Branch is a small, fully built-out inner-ring suburb in ZIP 75234 where almost no new residential land exists. That shapes fence work here. We’re almost always working around existing structures, mature trees, and older lot lines rather than on fresh ground. The housing stock runs to mid-century ranch homes and post-war cottages built from the 1950s through the 1970s, many now being remodeled or rebuilt as the city redevelops, and much of the housing near the southern edge blends into Dallas’s Brook Hollow and Marsh Lane area. That older stock means we regularly find fence posts set decades ago with little footer, and we plan for replacement rather than repair. The Blackland Prairie clay under Farmers Branch swells and shrinks hard between droughts and wet springs, so we set posts deep and check line after the first wet season. The city enforces codes and permits carefully on older properties, and we handle the permitting so the run passes inspection. If you’re also reworking the yard, homeowners often pair a new fence with Patios, Walkways & Pool Decks in Farmers Branch to finish the outdoor space in one go.
Serving Farmers Branch, TX – Our Local Coverage Area
We serve Farmers Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Iron Fence in Farmers Branch
Most residential runs take two to four days from layout to walkthrough. Larger perimeter jobs with multiple gates run longer. We give you a specific schedule in your written estimate so you know when crews arrive and when the job wraps.
Residential fences over a set height and any fence at a corner lot typically require a permit in Farmers Branch, and the city does enforce it on older properties. We confirm the requirement for your lot and pull the permit as part of the job. Call (844) 797-4808 and we’ll tell you what your property needs.
In most cases, yes. We plan post locations around existing beds and trees and protect what we can. Some root work is unavoidable with deep footers in clay soil, and we’ll flag that during the site walk before any digging starts.
Plan on $3,500 to $9,000 installed for a typical residential run. Footage, height, material grade, gates, and site conditions move the number. Call (844) 797-4808 for an exact quote – estimates are free.
Workmanship is covered by our 730-Day Done Right Promise, so if a post shifts, a weld fails, or a gate hangs wrong, we come back and make it right. Material warranties vary by finish and manufacturer, and we spell out both in writing before work begins.
Get a Free Iron Fence Estimate in Farmers Branch
Ready to price an iron fence for your Farmers Branch property? Call (844) 797-4808 and a live person answers, any hour. We’ll ask about your property line, height, gate needs, and timeline, then schedule a free on-site estimate with a written line-item quote. You’ll know the real number before anyone digs. That’s our fence installation service across Farmers Branch, and we’re glad to walk your lot.
Written by the team at Groundwork Construction Co.