A Groundwork company - serving Dallas, TX
Metal Roofing in Dallas, TX | Groundwork Construction Co. of Dallas

Metal Roofing in Dallas - Free Roof Inspection, Written Price

Free roof inspection with photos, then an itemized written price before anything is ordered. Installed by a licensed local professional and backed by a workmanship warranty.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Metal Roofing in Dallas, TX: Cost, Timeline, and What Your Property Actually Needs

Metal roofing in Dallas typically runs $15,000 – $40,000 for a full roof, and most residential installs finish in 2 – 5 days once materials land on site. The bigger variable on acreage and large-lot properties is usually the shop or barn standing beside the house, not the house itself. Call (844) 797-4808 for a free on-site estimate, and we’ll price the house and any outbuilding on the same written quote.

Call (844) 797-4808

How a Metal Roofing Job Runs, Start to Finish

We work in a fixed sequence so you know what happens on day one and what’s still open on day four. Every stage below carries a decision, and we don’t move to the next stage until you’ve signed off on the one in front of you.

  • Stage 1: Inspection and measurement (day 1, 2 – 3 hours). We walk the roof, measure every plane, check decking condition, and photograph the attic from underneath. On a detached workshop or oversized garage, we measure that roof separately and note whether it shares a wall with the house. You decide at this point whether the outbuilding is in scope or gets its own quote.
  • Stage 2: Written scope and material selection (day 1 – 2). You get a line-item quote: panels, underlayment, fasteners, trim, tear-off, disposal, and any decking repair. This is the stage where you pick panel profile and finish. Upfront pricing means the number on this sheet is the number you pay, short of hidden rot we couldn’t see until tear-off.
  • Stage 3: Tear-off and deck prep (day 2 – 3, one to two days). Old shingles come off, decking gets inspected board by board, and any soft or delaminated sheathing gets replaced. We re-nail where the fastening pattern is thin. On a large Dallas roof this is the longest single stage.
  • Stage 4: Underlayment and panels (day 3 – 4, one to two days). Synthetic underlayment goes down first, then eave trim, then panels or standing seam, moving upslope. Panel lengths are cut to the roof run, so the fewer splices the better the result.
  • Stage 5: Trim, flashing, and final inspection (day 4 – 5, half a day). Ridge cap, gable trim, pipe boots, valley flashings, and a magnet sweep of the yard. We walk the roof with you and hand over the material and workmanship paperwork. Everything we install is covered by our 730-Day Done Right Promise.

Technicians on this crew have up to 12 years of experience, and they’ve worked enough Dallas roofs to know when a 1970s ranch deck is going to surprise us and when it’s solid.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Options You’ll Choose Between

Metal roofing is not one product. The four choices below drive both the price and how the roof holds up under Dallas hail and summer heat.

  • Standing seam vs. exposed fastener. Standing seam panels hide the fasteners under a raised rib, expand and contract cleanly, and last longest. Exposed-fastener panels (screw-down) cost considerably less but rely on washers that eventually dry out in Texas sun. Standing seam suits the house; screw-down is a reasonable call on a shop or barn where you want coverage without a premium price.
  • Panel material: steel vs. aluminum. Galvalume or painted steel is the standard for Dallas and holds up well. Aluminum costs more but resists rust better in humid conditions.
  • Finish and color. A painted finish with a real warranty against fading and chalk matters more here than in a mild climate. Dark colors on a low-slope roof will bake the attic, so we pair them with proper ventilation.
  • Insulation under the panels. A radiant barrier or a ventilated air gap between the deck and the metal cuts summer heat gain noticeably. On a detached workshop where you’ll be working in July, it’s worth every dollar.

If the same property is getting new windows at the same time, homeowners often pair this with Window Replacement in Dallas to finish the envelope in one pass.

What Metal Roofing Costs in Dallas, TX

Expect $15,000 – $40,000 for a full residential metal roof in Dallas, and add $4,000 – $12,000 if a detached shop or oversized garage is in scope. The five variables that push a job to either end:

  • Roof size and pitch. A 1,800 sq ft ranch sits near the bottom. A steep, cut-up roof with dormers and multiple valleys sits near the top.
  • Decking condition. Replacing 20 sheets of sheathing is a real line item. We don’t know until tear-off.
  • Panel system. Standing seam adds a meaningful premium over exposed fastener.
  • Flashing complexity. Chimneys, skylights, and roof-to-wall transitions multiply labor.
  • Permit and inspection scope. Dallas permitting adds time and cost, and a re-roof that touches structural repairs expands the scope.

Your written estimate includes tear-off, disposal, underlayment, panels, fasteners, trim, and final cleanup. It does not typically include rot repair found after tear-off, gutter replacement, or structural work, and we tell you that upfront rather than after the fact.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Dallas Homes Specifically Do to This Job

Dallas sits on the Blackland Prairie, where expansive clay soil swells and shrinks through the wet-dry cycle. That moves foundations, and a moving foundation moves roof lines. On slab-on-grade ranch homes across Oak Cliff and East Dallas, we regularly find ridge lines out of level and valleys that have shifted a half inch over a decade of dry summers. A metal roof handles that movement better than shingles because the panels flex, but the flashing still has to be built to take it.

Then there’s hail. Spring storms and straight-line winds drive the case for a panel with a proper hail rating and a fastening pattern built for wind uplift. On a large-lot property in the far north or southeast edges of Dallas, the shop or barn roof usually takes the worst of it because it’s the tallest structure on the lot.

Permitting runs through the city, and a re-roof that includes any structural repair will pull an inspection. If you’re also reworking the house, this is worth considering as part of a full Roofing in Dallas project rather than a standalone job.

Serving Dallas, TX – Our Local Coverage Area

We serve Dallas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked – Metal Roofing in Dallas

Get a Free Metal Roofing Estimate in Dallas

Call (844) 797-4808 and a live person answers any hour. We’ll schedule a free on-site estimate, walk the roof and any outbuilding with you, and hand over a written line-item quote with the materials and scope spelled out. That quote is part of our Roofing service, and it covers Dallas and the surrounding neighborhoods. If impact-rated glass is on your list too, ask about Impact Windows & Doors in Dallas while we’re there.

Written by the team at Groundwork Construction Co.

Why Dallas Chooses Groundwork Construction Co. of Dallas

We set the standard for metal roofing in Dallas.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Dallas

Getting your metal roofing project started is simple.

1

Call or Request a Free Estimate

Tell us about your metal roofing project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local metal roofing pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Dallas Customers Say

Trusted by homeowners across Dallas and surrounding areas.

★★★★★

"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."

Craig Whitaker
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett

Ready for Metal Roofing in Dallas?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Dallas.

(844) 797-4808

Request a Free Estimate in Dallas

Tell us about your metal roofing needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - 24/7 Dispatch