Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sliding & Patio Doors in Dallas, TX: What the Job Really Involves
Sliding and patio door replacement in Dallas usually runs $2,800 to $7,500 per opening installed, and most single-door swaps wrap up in one to two days once the unit is on site. The work covers removing the old panel and frame, checking and often repairing the rough opening, flashing and sealing against our wind-driven rain, and hanging a new door that actually slides. Call (844) 797-4808 and we’ll set a free on-site estimate.
How We Install Sliding & Patio Doors, Stage by Stage
Every job starts with a measure and a look at what’s behind the drywall, because in Dallas the wall condition decides half the schedule.
Day 1 morning: measure and opening check
We confirm the rough opening is square and level, check the header for sag, and look at the threshold for water staining. On the slab-on-grade ranches common across Dallas, we also read the floor for movement. You decide the door model, glass package, and finish right here, because lead times run two to five weeks on most factory orders.
Days 1 to 3: order and permit
We place the order and, if the opening size or location changes, pull the permit. Like-for-like swaps in an existing opening usually don’t need one, but enlarging an opening or cutting a new one in a load-bearing wall does, and the engineered plan that comes with it is routine here. This is where you sign off on the final layout.
Install day: demo and prep
Out comes the old door and frame, typically a 2 to 4 hour job for one opening. We inspect the rough opening, replace any rotted framing or sill, and shim and level the new threshold. You don’t have to decide anything at this stage; we handle the surprises and flag anything that changes the number before we go further.
Install day: setting and sealing
The new unit goes in plumb and square, then gets low-expansion foam, a proper sill pan, and a continuous sealant bead. We flash the exterior and check the sliders track clean and latch flush. Most single doors finish the same day.
Final walk and punch
We open and close the door a dozen times, check the screen, adjust rollers, and clean up. You walk it with us, and any adjustment gets made before we leave. Every install is covered by our 730-Day Done Right Promise, which is one of the longest workmanship guarantees in the residential construction space.
If your project is growing into a larger exterior update, that scope is part of a full Windows & Doors in Dallas plan, and we’ll price it together so you’re not paying twice for mobilization.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Sliding & Patio Door Options You’ll Choose Between
Most of the decision comes down to frame material, glass, and how the door opens. Here’s the honest trade-off on each.
- Vinyl frames: The value pick for Dallas humidity. They don’t rot or need paint, hold up well to summer heat, and run $2,800 to $4,500 installed. The catch is color choice is limited and very large panels can flex.
- Aluminum frames: Slim sightlines and strong in wide openings, good for the modern infill builds going up around Dallas. Expect $4,000 to $6,500 installed. Aluminum conducts heat, so it needs a thermal break to perform in July.
- Fiberglass and wood-clad: The premium choice, $5,500 to $7,500 plus. Real wood interior, tough exterior, and the best look for pre-war pier-and-beam homes. These need more care and cost more to buy.
- Glass packages: Low-E with argon is the baseline here to cut summer heat gain. Laminated or impact-rated glass adds roughly $600 to $1,500 per door and is worth it in a hail and wind zone.
- Configuration: A two-panel slider is the standard. Multi-slide and pocket doors open up the wall more but jump the price and may need structural work.
What Sliding & Patio Doors Cost in Dallas, TX
Plan on $2,800 to $7,500 per door installed for a typical Dallas replacement, with a like-for-like two-panel vinyl slider landing near $3,200 and a large wood-clad or multi-slide unit pushing past $7,500. Here’s how the number moves:
| Line item | Typical Dallas range |
|---|---|
| Standard two-panel slider, installed | $2,800 – $4,500 |
| Large or multi-slide unit, installed | $5,500 – $7,500+ |
| Impact-rated glass upgrade | $600 – $1,500 |
| Frame or header repair | $300 – $1,200 |
What pushes a job to the high end: opening size, rotted framing found at demo, moving or enlarging the opening, premium frame and glass, and permit scope. A written estimate lists the door model, glass, labor, disposal, flashing, and finish work. What it typically doesn’t include is structural changes or unexpected rot, which we price as a separate line before touching it. Upfront pricing, no surprises: the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Dallas Homes Specifically Do to This Job
Dallas sits on the Blackland Prairie clay belt, and that changes the work. Expansive vertisols swell and shrink with the wet-dry cycle, so a house that has shifted can throw a patio door out of square; we check the opening for racking before we order, because a new door hung in a moving frame will drag within a season. In Oak Cliff and East Dallas the older pier-and-beam bungalows often need sill and header repair, while the 1950s-70s slab ranches across the city need a careful look at the threshold for heat and moisture. Then there’s the weather: hot, humid summers and hard freezes plus spring hail and straight-line wind push us toward impact-rated glass and solid flashing. We cover all of Dallas and the surrounding neighborhoods. Homeowners often pair a door upgrade with Fence Repair in Dallas while we’re already on the exterior, or with Paver Driveways in Dallas for a full backyard refresh. It all fits into our Windows & Doors service.
Serving Dallas, TX – Our Local Coverage Area
We serve Dallas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Sliding & Patio Doors in Dallas
A standard single-door replacement takes one to two days on site once the unit arrives; order lead time is typically two to five weeks. Larger multi-slide units or jobs with framing repair can run two to three days. Call (844) 797-4808 for a timeline on your opening.
A like-for-like replacement in the same opening usually doesn’t require a permit; enlarging an opening or cutting a new one in a load-bearing wall does. We tell you up front which applies and pull the permit when needed. Call for a free assessment of your job.
Yes, in most cases a same-size swap involves no plumbing or structural changes at all. It’s only when you want a wider opening or a new location that we bring in framing and engineering. Call (844) 797-4808 to walk through your layout.
Most Dallas installs run $2,800 to $7,500 per door, depending on size, frame material, and glass. Impact-rated glass and larger panels sit at the top of that range. Call (844) 797-4808 for an exact quote; estimates are free.
Workmanship is backed by our 730-Day Done Right Promise, and the door itself carries the manufacturer’s warranty on frames, glass, and hardware. That’s a written guarantee, not a verbal one. Call to see how it applies to your project.
Get a Free Sliding & Patio Door Estimate in Dallas
Tell us the opening and what you want it to do, and we’ll come measure, check the frame, and hand you a written line-item quote for sliding and patio doors in Dallas. Calls are answered by a live person 24/7, and we offer 0% financing for 18 months plus $1,000 off projects over $10,000. Call (844) 797-4808 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of Dallas.