Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Patios, Walkways & Pool Decks in Dallas: What They Cost and How Long They Take
Patios, walkways & pool decks in Dallas usually run $3,500 – $11,000 for a paver patio, with walkways and pool surrounds priced by the square foot inside that same band, and most residential jobs finish in three to seven working days once materials land on site. The work covers demolition of the old slab or surface, base prep on our clay soil, drainage grading away from the house, and the finished hardscape. For an exact number on your yard, call (844) 797-4808 and we’ll set a free on-site estimate.
How the job actually runs, from first cut to final sweep
Hardscape goes sideways fast when the sequence is wrong. Here’s the order we hold to on every Dallas project.
Day 1: Demo and layout
We cut and haul out the old concrete, cracked flagstone, or worn decking, then string the new layout against the house line and the pool coping. If the existing patio drains toward the foundation (common on slab homes built before 1980), this is when we re-set the slope. You confirm the footprint and the direction walkways run before anything gets compacted.
Days 1 – 2: Base prep and drainage
This is the stage that decides whether your patio still looks level in five years. On Dallas’s expansive clay, we excavate to depth, lay geotextile fabric, and compact crushed stone base in lifts. Pool decks get extra attention where the surround meets coping, so water sheds away from the shell instead of pooling against it. You don’t decide anything here, but you should ask to see the base before pavers go down. A crew that won’t show you is a crew to worry about.
Days 3 – 5: Setting the surface
Pavers, stamped concrete, or stone go in over the compacted base, cut tight at edges, steps, and pool coping. Pattern and color get locked in at this point, so any changes need to happen before the first pallet opens. Walkways typically take a day; a full patio plus pool surround runs two to three.
Days 5 – 6: Polymeric sand, sealing, and edge restraint
We sweep polymeric sand into the joints, wet it to set, and install edge restraint so the field doesn’t creep. Sealing follows once the surface is dry, usually the next morning. Skipping edge restraint is the single most common shortcut we get called out to fix.
Day 7: Final walkthrough
We walk the finished surface with you, check drainage with a hose test, and hand over care instructions. Any touch-ups get logged before we leave. Our 730-Day Done Right Promise covers the workmanship from that walkthrough forward.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
- Clay brick pavers: The classic Dallas look and the most forgiving on clay soil because individual units flex with minor movement. Expect $8 – $14 per square foot installed. Repairable unit by unit if a line ever heaves.
- Concrete pavers: Wider color range, similar durability, often a touch cheaper at $7 – $12 per square foot. Great for pool decks where you want a clean, modern field.
- Stamped concrete: Lowest upfront cost at $6 – $10 per square foot, but it cracks. On Blackland clay, a stamped slab needs proper control joints and a solid base, and it can’t be spot-repaired the way pavers can.
- Natural stone (flagstone, travertine): Premium at $15 – $25 per square foot. Travertine stays cool underfoot around a pool, which matters in a Dallas July. Flagstone needs a sturdier base and more maintenance.
- Permeable systems: Open-joint pavers or permeable joints let rainwater soak in rather than sheet across the yard. Worth the 10 – 15% premium on lots with drainage trouble.
Finish choices matter too: sand-set vs. mortar-set joints, polymeric sand color, and whether you want a sealed or natural look. Sealed surfaces resist staining but need re-sealing every few years; natural surfaces age more gracefully.
What Patios, Walkways & Pool Decks costs in Dallas, TX
Plan on $3,500 – $11,000 for a paver patio, with walkways and pool surrounds layered on top of that. A typical Dallas backyard patio with a connecting walkway and a pool surround lands around $6,000 – $9,500.
| Line item | Typical range |
|---|---|
| Paver patio installation | $3,500 – $11,000 |
| Walkway (per linear foot) | $25 – $60 |
| Pool deck surround (per sq ft) | $8 – $14 |
| Demo and haul-off of old surface | $500 – $1,800 |
| Base repair / drainage correction | $600 – $2,500 |
| Sealing (after cure) | $250 – $700 |
Five things push a job to the top of that range: square footage, the condition of what’s underneath (an old slab that’s heaved or a pool shell with settlement issues), whether we’re correcting drainage or grade, material grade, and whether the layout needs to tie into an existing structure. A written estimate from us lists every line item, so you see what’s included and what isn’t before we start. The number you see is the number you pay. No change orders without your sign-off, no surprise add-ons at the end.
See the difference
Before
After
Before
After
Before
AfterWhat Dallas homes specifically do to this job
Dallas sits on Blackland Prairie clay, and that changes everything about how a patio or pool deck gets built here. Those soils swell when wet and shrink when dry, so a surface poured or set without proper base depth and drainage will heave, crack, and pull away from the house within a few dry summers. We see this constantly in Oak Cliff and East Dallas, where pre-war pier-and-beam bungalows often have older patios that were never built for the movement underneath. The 1950s – 70s slab ranches across the city have their own pattern: patios poured tight against the foundation with no expansion joint, which then crack along the house line.
Pool decks get a second layer of complexity. The surround has to move independently of the shell and the house, or the coping takes the stress. We set expansion joints at every transition and grade the surface so water runs away from both. If your project touches the foundation or a structural element, Dallas requires engineered plans and permits, and we pull those for you. Hail and straight-line wind don’t hit hardscape the way they hit roofs, but summer heat and UV do, which is why sealing schedules matter here.
We cover the whole city, from Dallas neighborhoods like Lakewood and Preston Hollow out to the nearby suburbs, and this is part of a wider Driveway & Pavers scope when a homeowner wants the front and back of the property addressed together. If you’re also planning a full Driveway & Pavers in Dallas project, we can sequence both so the equipment only mobilizes once. Homeowners often pair this with ADU Site Prep & Utilities in Dallas when a backyard build is on the horizon, or with Full Kitchen Remodeling in Dallas when the whole property is getting an update. We keep the same crew on site and the same schedule.
Serving Dallas, TX – Our Local Coverage Area
We serve Dallas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Patios, Walkways & Pool Decks in Dallas
Most residential patios run three to seven working days; pool decks with a surrounding walkway take five to nine. Weather, material lead times, and the condition of the existing surface are the swing factors. Call (844) 797-4808 and we’ll give you a realistic schedule with your estimate.
It depends on scope. A standard ground-level patio usually doesn’t require a permit; anything structural, tied to a pool shell, or involving grade changes that affect drainage may. We handle the permit question during the estimate so you’re not guessing. Call us to walk through your specific project.
Yes, in most cases. We work around the shell with proper expansion joints and protect the water during demo and setting. If the coping or shell shows settlement, we’ll flag it before work starts so there are no surprises mid-job.
Walkways typically run $25 – $60 per linear foot depending on width, material, and base conditions. A 40-foot front walk in clay brick usually lands in the $1,400 – $2,200 range. Call (844) 797-4808 for an exact figure.
Every patio, walkway, and pool deck we install is covered by our 730-Day Done Right Promise – if it isn’t done right, we make it right. That’s on top of manufacturer warranties on the pavers and materials. We put it in writing before the first shovel hits the ground.
Get a free on-site estimate for your Dallas patio, walkway, or pool deck
Call (844) 797-4808 and a live person answers, any hour. We’ll ask a few questions about your yard, your timeline, and what you want the space to do, then book a free on-site estimate. You’ll get a written line-item quote with materials, labor, and timeline spelled out. No pressure, no vague numbers.
Written by the team at Groundwork Construction Co.