Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Duncanville: What the Job Actually Involves
Paver driveways in Duncanville run $7,000 to $18,000 installed, and most driveways are finished in 3 to 5 working days from demo to joint sand. The job is excavation and base prep first, then a compacted aggregate base, then the pavers set on a sand bed, cut at the edges, and compacted into place. The base is where the money goes, because North Texas clay moves and a thin base cracks open in two summers. Call (844) 797-4808 for a free on-site estimate before you commit to anything.
Stage by stage: how a paver driveway goes in
Every paver driveway in Duncanville follows the same sequence. The timing shifts with driveway size and how much of the old surface comes out, but the order doesn’t.
Day 1 and 2 – demolition and base excavation. We cut out the existing concrete, asphalt or gravel, haul it off, and dig down to the depth the base needs. We check the slope toward the street so water runs off instead of puddling at the garage door. You decide here whether the driveway widens, gains a turnaround apron, or ties into a walkway.
Day 2 and 3 – base and compaction. We lay the aggregate base in lifts and compact each one, checking grade with a laser. This is the step that is invisible when the job is done and the single biggest driver of whether the pavers stay put through clay movement and summer heat. You don’t have to decide anything here. We do, and we don’t rush it.
Day 3 and 4 – pavers and edge restraint. The pavers go down in your chosen pattern, get cut along the driveway edges and around any curves, and the edge restraint goes in. The restraint is what keeps the field from spreading outward over time. You confirm the pattern and border before this stage starts.
Day 4 and 5 – joint sand and final compaction. We sweep polymeric or regular joint sand into the gaps and run a plate compactor over the field, which locks the pavers together and into the sand bed. A final pass cleans the surface.
Walkthrough and handoff. We walk the driveway with you, check the grade at the apron, and leave you with care instructions for the first season. Every paver driveway we install in Duncanville is covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
- Paver material. Concrete pavers run $7,000 to $18,000 installed here, cost less up front, and hold color for years with minimal maintenance. Clay brick pavers warm up the look of a 1950s – 70s brick-veneer home and take color all the way through, but they cost more and chip if a heavy truck parks on them. Belgard concrete pavers are a solid middle ground.
- Pattern. A running bond or herringbone pattern interlocks well and handles loads. A basketweave or stack bond looks cleaner but needs a tighter base to stay tight.
- Color family. Gray and charcoal tones hide tire marks and clay dust. Warm reds and tans pick up the brick on most Duncanville homes.
- Border and edging. A soldier-course border or contrasting band gives the driveway a finished edge and stops field pavers from walking. Worth the small upcharge.
- Permeable option. Permeable pavers with open joints handle runoff better, which matters where a driveway slopes toward the house or the street.
What Paver Driveways cost in Duncanville, TX
Paver driveway installation in Duncanville runs $7,000 to $18,000. That band covers a standard two-car driveway in concrete pavers on a properly compacted base.
What pushes a job toward the high end:
- Square footage. A wider driveway, a turnaround, or an extra parking pad adds material and base work fast.
- Existing surface. Removing old concrete or asphalt adds a demolition and haul-off line item. Leaving an old slab under the new pavers isn’t an option if it’s cracked.
- Base depth. Clay soil sometimes needs a deeper or stabilized base, and that’s an extra material and labor line.
- Paver grade. Premium clay brick and tumbled finishes sit at the top of the range. Standard concrete pavers sit at the bottom.
- Drainage work. If the grade slopes toward the garage or a low spot, we may add a channel drain or regrade. That’s a separate line.
Our written estimate is line-item, so you see base, pavers, edge restraint, joint sand and haul-off separately. The number you see is the number you pay. Permits, if the job needs one, are listed separately and pulled before work starts.
See the difference
Before
After
Before
After
Before
AfterWhat Duncanville homes do to this job
Duncanville is a built-out, largely post-war bedroom city, and almost all the driveways we work on here are renovations on 1950s – 1970s brick-veneer ranch homes on slab foundations across 75116, 75137 and 75138. That means old concrete aprons, roots heaving a slab, and grade that has settled over decades. The expansive black clay soil under Duncanville heaves and shrinks every wet-dry cycle, so a paver driveway lives or dies by its base. We check the current slab for cracks and settle before we quote, because a driveway over a failing slab won’t stay flat. Hot summers over 100°F and spring hail and wind events also mean we spec pavers and joint sand that can take thermal movement. It’s a different job than a new-build driveway in Glenn Heights or Lancaster. If your driveway ties into a bigger project, this is part of a full Driveway & Pavers in Duncanville scope, and homeowners often pair a new driveway with a garage update or ADU Design & Permitting in Duncanville.
Serving Duncanville, TX – Our Local Coverage Area
We serve Duncanville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Paver Driveways in Duncanville
Most paver driveways take 3 to 5 working days from demo to final compaction. Larger driveways or jobs with significant base work run toward the longer end. Call (844) 797-4808 for an exact timeline after a site visit.
Many paver driveway installations don’t need a separate building permit, but any drainage change, curb cut or right-of-way work does. We confirm the requirement with the city before work starts and pull the permits if the job needs them. Call us for a free estimate and we’ll walk you through it.
Only if the existing slab is sound and the added height clears your garage door and the street apron. Cracked or settled concrete has to come out, because pavers laid over a failing slab will mirror the cracks. We check on site and tell you straight.
Paver driveway installation in Duncanville runs $7,000 to $18,000, depending on size, base depth, paver grade and whether we remove an old surface. Get an exact price from a written line-item estimate, not an over-the-phone guess. Call (844) 797-4808, estimates are free.
Our paver driveways are covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space. Call (844) 797-4808 to schedule your free estimate.
Get a free estimate for Paver Driveways in Duncanville
We’ll come out, measure the existing driveway, check the base and grade, and hand you a written line-item estimate for Paver Driveways in Duncanville. No pressure, no surprises. Call (844) 797-4808 and a live person will pick up, any hour. Ask about 0% financing for 18 months and $1,000 off projects over $10,000. You can also see our Driveway & Pavers work and the areas we cover in Duncanville, and if a garage remodel is on your list, we handle a Garage Conversion ADU in Duncanville too.
Written by the team at Groundwork Construction Co. of Dallas.