Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Duncanville, TX: What It Costs and How Long It Takes
A tub-to-shower conversion in Duncanville typically costs $3,500 – $10,000 and takes five to ten working days from demo to final walkthrough. The job means pulling the old tub and its surround, reworking the drain and valve to fit a shower pan, waterproofing the wet area, and setting new tile or a prefab wall system. Most Duncanville homes we see land in the $5,500 – $8,000 range once plumbing relocation and 1950s – 70s slab conditions are accounted for. Call (844) 797-4808 for a free on-site estimate.
How a Tub-to-Shower Conversion Actually Runs, Day by Day
Every conversion follows the same spine. Here is what happens and when, plus the decisions you’ll make at each stage.
Stage 1: Site review and rough scope (day 1)
We open the wall behind the tub to see what the drain and valve are really doing. In Duncanville’s older brick-veneer ranches, that means checking whether the tub drain ties into cast iron or early PVC, and whether the valve is a two-handle setup that needs replacing to meet current code. You decide here whether you’re keeping the existing footprint or shifting the drain. That one call moves the budget more than any finish choice.
Stage 2: Demo and inspection (days 2 – 3)
The tub, surround, and any furring come out. We inspect the subfloor and the wall cavity for soft spots, old water staining, and termite damage. Because much of Duncanville’s housing stock sits on slab, this is also when we confirm the slab is sound at the drain cut. If there’s a crack near the drain, it gets addressed before the new pan goes in, not after.
Stage 3: Rough-in plumbing and electrical (days 3 – 4)
New drain line, new shower valve, and the shower light or fan if you’re adding one. A licensed plumber sets the valve and we pressure-test before closing anything up. If the panel is original to the house, and many are here, adding a dedicated GFCI circuit for a shower light or heated floor means a panel evaluation first.
Stage 4: Waterproofing and tile (days 5 – 8)
A bonded waterproofing membrane goes over the pan and walls. We flood-test the pan for a full day. Then tile or panels go up, grout, and cure. This is the longest stretch because thin-set and grout need real cure time, not a rushed schedule.
Stage 5: Fixtures, glass, and final walkthrough (days 9 – 10)
Showerhead, trim, glass door or curtain rod, and a final inspection of slope, caulk lines, and drainage. You walk the finished shower with us before we pack out. Full sequence typically runs five to ten working days, with tile-and-membrane jobs landing toward the longer end.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the budget conversation comes down to four decisions. Here’s the honest trade-off on each.
- Prefab shower pan and wall kit vs. tiled shower: A prefab acrylic or fiberglass unit runs lower and installs faster. It’s easier to clean and holds up well, but it reads builder-grade and limits your tile choices. A tiled shower gives you the design freedom and resale value most Duncanville homeowners want, and it’s where the labor cost lives.
- Tile grade: Porcelain is the workhorse – dense, water-resistant, and available in large formats that cut grout lines. Natural stone (marble, travertine) looks richer but needs sealing and costs more per square foot in both material and labor. For a wet area, porcelain is the practical answer.
- Shower size and layout: A standard 60-inch tub footprint converts to a 60-inch shower with no framing changes. Going wider or adding a bench means moving walls, which pulls in drywall, framing, and possibly a permit revision.
- Glass and door: A framed glass door is the cost-conscious pick. A frameless enclosure looks cleaner and holds resale value, but costs meaningfully more and needs precise measurement once tile is set. A simple curtain rod is the budget option and works fine in a hall bath.
Mention Oldcastle or Quikrete for the setting materials and Sakrete for the pan mud if you want brand continuity, and we’ll spec them on the estimate so the line items match the schedule.
What Tub-to-Shower Conversion Costs in Duncanville, TX
The Duncanville market runs $3,500 – $10,000 for a tub-to-shower conversion. Where your job lands depends on five variables:
- Footprint change: Keeping the existing tub footprint is the low end. Widening the shower or relocating the drain pushes toward the top.
- Existing plumbing condition: Cast-iron drains and two-handle valves in older homes add plumbing labor. Slab cracks near the drain add remediation.
- Material grade: Prefab kit vs. porcelain tile vs. natural stone can swing the number by a few thousand dollars on its own.
- Electrical scope: Adding a shower light, exhaust fan, or heated floor may require a panel evaluation and a new circuit.
- Permit scope: A straight swap with no drain or valve movement may not require a plumbing permit. Moving the drain or valve does, and that pulls an inspection into the schedule.
A written estimate from us lists demo, rough-in plumbing, waterproofing membrane, tile or panel material, fixtures, glass, and cleanup as separate lines. What it doesn’t include: structural repair if we open a wall and find rot, foundation work if the slab needs it, and any tile or fixture upgrades you choose after the walkthrough. Those are quoted separately before work starts, never billed as a surprise. Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Duncanville Homes Specifically Do to This Job
Duncanville is a built-out, largely post-war bedroom city in southwest Dallas County, and nearly all the tub-to-shower work here is renovation on 1950s – 1970s brick-veneer ranch and traditional homes on slab foundations across ZIPs 75116, 75137, and 75138. There’s no greenfield building to hide behind, so the trade is defined by tie-ins to aging slabs and cast-iron or early PVC drains. That’s a different animal than the fast-growth corridor in Midlothian or Waxahachie. The expansive black clay soils across Duncanville heave and shrink with wet-dry cycles, and that shows up in bathrooms as slab cracks near the drain and out-of-level floors. We price foundation review into the scope before demolition begins, not after. Original electrical panels are also common, and modern permitting scrutiny means a new shower circuit or fan rarely slips through without an evaluation. If the wider project grows beyond the bathroom, our Duncanville service-area page lays out the full range of work, and homeowners often pair a bath update with Metal Roofing in Duncanville or Tile Roofing in Duncanville when the spring hail season has done its damage.
Serving Duncanville, TX – Our Local Coverage Area
We serve Duncanville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tub-to-Shower Conversion in Duncanville
Five to ten working days, depending on tile vs. prefab and whether plumbing or electrical moves. A straight swap runs closer to five. A tiled conversion with a relocated drain and new valve lands toward ten because the waterproofing flood test and grout cure time can’t be compressed. Call (844) 797-4808 for a realistic schedule on your specific bathroom.
Often yes, especially if the drain or shower valve moves. A straight fixture swap that keeps the existing plumbing in place may not trigger a plumbing permit, but Duncanville’s plan review on older homes scrutinizes panel and drain tie-ins. We handle the permit application, the inspection scheduling, and the final sign-off. Call (844) 797-4808 and we’ll tell you what your job needs.
Yes, and that’s the most common approach. A standard 60-inch tub footprint converts to a 60-inch shower pan with the drain staying roughly where it is. Keeping the footprint holds the budget at the lower end of the $3,500 – $10,000 range. Moving the drain or widening the shower is what pushes cost up. Call (844) 797-4808 to walk through your layout.
Between $3,500 and $10,000, with most local jobs landing in the $5,500 – $8,000 range once older-home plumbing and slab conditions are included. Prefab kits sit at the low end, tiled showers with frameless glass at the top. Call (844) 797-4808 for an exact quote. Estimates are free.
Every conversion is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If the shower isn’t right, we come back and fix it. That holds for waterproofing, tile, and plumbing work. Call (844) 797-4808 to get a written scope and warranty in hand before you commit.
Get a Free Tub-to-Shower Conversion Estimate in Duncanville
We’ll walk your bathroom, open the wall behind the tub to see the drain and valve, and hand you a written, line-item estimate before any work starts. That estimate is free and there’s no pressure to sign on the spot. Our technicians have up to 12 years of experience and arrive background-checked and in uniform. If the bathroom turns out to be part of a bigger project, our Bathroom Remodeling in Duncanville page covers the wider scope, and you can see the full Bathroom Remodeling service to understand how a conversion fits into a larger remodel. Call (844) 797-4808 for your free estimate.
Written by the team at Groundwork Construction Co.