Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Highland Park, TX: What the Job Actually Involves
Paver driveway installation in Highland Park typically runs $7,000 – $18,000 and takes three to six working days from demo to first drive. The work is mostly prep: tearing out the old surface, rebuilding a base that can handle North Texas clay, then laying pavers on top. If you’re weighing numbers on a Highland Park paver driveway, call (844) 797-4808 and we’ll walk your property and put a line-item estimate in writing.
How we build a paver driveway, stage by stage
Most homeowners think the job is the pavers. It isn’t. On Highland Park’s clay, the base is where a driveway either holds for 30 years or starts heaving in three. Here’s the sequence we follow, and where you make decisions.
Day 1: Layout, demo and excavation
We mark utilities, confirm the finished height against your garage apron and street, then break out and haul off the existing surface. Excavation typically runs 8 to 12 inches deep depending on paver thickness and base spec. You’ll have already picked your paver style and pattern by this point, because layout drives everything downstream.
Days 1 – 2: Base, compaction and drainage
We lay and compact crushed stone in lifts, checking slope toward the street or a drainage point at every stage. This is the slow part and it’s deliberately slow. On the expansive soils under most Highland Park lots, a properly compacted base is what stops the cracking and settling people see on cheap jobs two summers later. You’ll decide here whether you want a perimeter drain or a channel drain at the apron.
Day 3: Edge restraint and bedding layer
Concrete or steel edge restraint gets set into the base so the field can’t spread. Then we screed a thin sand bedding layer to final grade. Nothing to decide for you unless you’ve chosen a curved layout, which changes the edging.
Days 3 – 5: Paver installation
Pavers go down in your chosen pattern, cut at the edges and around any curve. Joint sand fills the gaps and gets compacted in. On a typical two-car Highland Park driveway this is two to three days.
Day 5 – 6: Final compaction, cleanup and walkthrough
We run a final plate compaction, blow off the surface, and walk the finished driveway with you, checking transitions and drainage. We won’t tell you to drive on it before the job is signed off. Whole project comes with our 730-Day Done Right Promise – if it isn’t done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
For a paver driveway, the real decisions are material, thickness, pattern and color. Each has a trade-off worth knowing before you sit down with a sample board.
- Concrete pavers (the standard choice): The workhorse. Dense, freeze-resistant, holds color for decades, and priced in the middle of the field. Suits most Highland Park homes and matches historic brick detailing if you want it to.
- Clay brick pavers: The most authentic pairing for 1910s – 1930s Tudor and Colonial homes here. Beautiful and genuinely durable, but at the top of the price range and slightly softer than concrete. Worth it if the look matters as much as the drive.
- Permeable pavers: Joints designed to let water through. Reduces runoff and can help where drainage is tight. Costs more up front and needs occasional vacuum sweeping.
- Thicker pavers (80 mm vs 60 mm): Thicker pavers handle heavier loads and resist settling better. Worth the small premium if you park an SUV, boat or trailer on the drive.
- Pattern and color: Herringbone is the strongest interlock; running bond is the most common; basket weave reads formal and fits the older homes here. Lighter colors stay cooler in the summer heat; darker absorb more but show less staining.
We also see homeowners pair a paver driveway with a matching front walkway or a larger outdoor plan – the same crew and the same base work. If the driveway is part of a full Driveway & Pavers in Highland Park scope, we’ll spec them together so the materials and color run continuous.
What Paver Driveways costs in Highland Park, TX
Installed paver driveways in Highland Park run $7,000 – $18,000 for a standard two-car drive, replaced surface and all. Five things push a job toward the top or bottom of that range:
- Square footage. A single-car drive at 300 sq ft sits near the bottom; a circular or oversized drive at 700+ sq ft pushes high.
- What’s under the surface. Rotten or heaved base adds demo and haul-off cost. If the old slab is thick or the base is failing, plan for the higher end.
- Paver grade and thickness. 60 mm standard concrete pavers are cheapest; 80 mm or clay brick at the top.
- Drainage. A perimeter or channel drain is a small but real add.
- Permit scope. The Town of Highland Park has its own design review, and a driveway that changes your lot coverage or curb cut triggers a permit you’ll want pulled correctly.
A written estimate itemizes demo, haul-off, base depth, paver type, edge restraint, sand, and permit fees if required, so you can see where the money is going. Anything not on the estimate – usually landscaping repair at the edges, or gutter work if the apron changes – is called out separately before we start. No surprise line items mid-job. If the seasons have chewed up your existing apron as well, that’s often where a broader Driveway & Pavers scope starts to make sense.
See the difference
Before
After
Before
After
Before
AfterWhat Highland Park homes specifically do to this job
Almost nothing about Highland Park is new construction. You’re working on a 1910s – 1930s Tudor, Colonial or Mediterranean home on a small, tree-shaded lot, and that changes the paver driveway job in ways a greenfield build never hits.
First, permits. The Town of Highland Park runs its own permitting and design review, and the rules around lot coverage and curb cuts are stricter than the surrounding Dallas codes. A driveway expansion that crosses into your setback or changes drainage toward the street usually means a formal review. We plan for that in the schedule, and we pull and manage the permits ourselves.
Second, the trees. Highland Park’s mature pecan and live oak canopy over narrow streets is genuinely beautiful and genuinely a constraint. Wide material deliveries and heavy hauling often need a tree-protection plan and, occasionally, a street closure coordinated with the town. We build that into day 1.
Third, the soils and weather. North Texas clay moves with the seasons. Without a well-built base, a paver driveway on a Highland Park lot will heave and settle at the same rate the slab it replaced did. That’s why the base gets two days.
We handle paver driveways throughout Highland Park, from the blocks near the Dallas Country Club to the quieter residential streets. If you’re considering a garage-conversion project alongside, homeowners often pair this work with Garage Conversion ADU in Highland Park – a new driveway surface finishes the front elevation at the same time. Or if you’re adding a small dwelling on the lot, ADU Design & Permitting in Highland Park covers the approvals that sometimes overlap with the driveway work.
Serving Highland Park, TX – Our Local Coverage Area
We serve Highland Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Paver Driveways in Highland Park
Three to six working days for a standard two-car paver driveway, weather and permit review permitting. Demo typically goes day one, base and compaction days one and two, laying days three through five, and final walkthrough the last day. Call (844) 797-4808 with your driveway size and we’ll give you a tighter window.
Often yes. The Town of Highland Park has its own design review and permit process, and any change to your curb cut, lot coverage or drainage toward the street typically triggers review. Straight replacement in the same footprint sometimes doesn’t. We confirm the permit requirement for your specific lot during the estimate.
Sometimes, but rarely the right call on Highland Park’s clay. If the existing slab or base is sound and there’s height clearance under the garage apron, an overlay can work at lower cost. If the base has heaved or cracked, an overlay just transfers the failure. We measure base condition before recommending either.
Installed, $7,000 – $18,000 for a standard two-car drive. Single-car drives start near $7,000; oversized, circular or clay-brick drives sit at the high end. Call (844) 797-4808 for an exact quote – estimates are free.
Every paver driveway we install is covered by our 730-Day Done Right Promise – if it isn’t done right, we make it right. Material warranties run separately and depend on the paver brand you choose. We put the full warranty terms in the written estimate so nothing is verbal.
Get a free on-site estimate for your Highland Park paver driveway
We’ll come walk the driveway with you, measure the existing surface, check what the base is doing, and hand you a line-item written estimate for a paver driveway in Highland Park. No pressure, no vague “ballpark” number. Call (844) 797-4808, ask for the driveway estimate, and we’ll get you scheduled. Upfront pricing, no surprises. The number you see is the number you pay.
Written by the team at Groundwork Construction Co.