Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Duncanville: What It Takes
Walk-In Showers & Shower Remodeling in Duncanville typically runs $4,500 – $12,000 for a walk-in shower install and $9,000 – $28,000 when the shower anchors a broader bathroom overhaul, with most single-shower projects finished in 3 to 8 working days. Most Duncanville homes we open up are 1950s – 1970s slab ranches, so the real variable is what the old drain and framing look like once the tile comes off. Call (844) 797-4808 for a free on-site estimate and a written line-item quote.
Key takeaways
- Typical timeline: 3 – 8 working days for a shower install; longer when the pan needs reframing or the drain relocates.
- Most common scope in Duncanville: replacing a 1980s – 90s fiberglass insert with a tiled or solid-surface walk-in shower.
- Biggest hidden cost here: cast-iron or early PVC drain tie-ins and old valve bodies that fail once disturbed.
- Permit: required for any change to the drain or supply lines; our written estimate spells out who pulls it.
How a walk-in shower project actually runs, day by day
This is the sequence we follow on nearly every shower in Duncanville. Timelines assume nothing surprises us behind the wall. When it does, you find out on the same day, not at the final invoice.
Stage 1: On-site measure and scope (day 0)
A site visit takes about an hour. We measure the rough opening, check the drain location and pitch, test the valve, and note whether the wall behind the old surround is dry or shows moisture staining. You decide the footprint here: curbless versus a low curb, and whether the shower grows by borrowing square footage from a closet or adjacent hall. Those two choices drive the whole budget.
Stage 2: Demo and uncover (day 1)
We tear out the old pan, surround, tile, and backer. On a Duncanville ranch built in the 1960s, this is where we typically find the original cast-iron drain collar or a thin-set mortar bed that has been holding moisture for years. Waterproofing decisions get made the same afternoon, not left for a callback.
Stage 3: Rough-in plumbing and framing (days 2 – 3)
If the drain or supply lines move, this is where it happens. We cut and re-slope the drain, replace tired valve bodies behind the wall rather than build over them, and reframe any soft studs. You approve the fixture location and valve finish before the wall closes. City inspection of the rough-in is scheduled at the end of this stage if the permit scope calls for it.
Stage 4: Waterproofing and tile setting (days 4 – 6)
A cement backer board goes up, then a liquid or sheet waterproofing membrane with a sealed pan and a sloped curb. We flood-test the pan and let it cure. Then comes the tile or slab install. This is the longest phase, and it’s where the finish choices you made in the design consult play out. Glass is templated near the end of this stage for a 7 – 10 day fabrication lead time.
Stage 5: Glass, trim, and final walk (days 7 – 8)
Glass installs, trim and fixtures go on, and we run a full water test on the shower while you watch. You get a punch-list walk, a written care sheet, and the coverage for the job: the 730-Day Done Right Promise, backed in writing. If the glass slips a week, we come back. That callback is covered, not billed.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that shape the final shower
Most homeowners on this job make four or five real decisions. Here’s what each one costs you in money or maintenance, in plain terms.
- Curbless vs. low-curb pan. A curbless, linear-drain pan is the cleanest look and the safest for aging knees, but it runs $1,500 – $3,000 more because the subfloor gets recessed and a trench drain is set. A low curb with a standard center drain is the budget default and code-friendly in most homes.
- Tile vs. solid surface. Porcelain or ceramic tile is the most economical (often $4 – $12 per sq ft installed), with a grout line that needs occasional sealing. Large-format slab panels and engineered stone skip the grout entirely and clean up easily; expect the higher end of the range.
- Frameless glass. A framed pivot door is functional and affordable. Frameless tempered glass is the premium look, runs $800 – $2,500 depending on width and hardware, and gets templated late in the job.
- Fixture brand tier. We specify Kohler across the fixture package for lasting cartridges and finish wear. Off-brand valves are cheap up front and costly when the cartridge fails in year four.
- Niche and bench. A recessed shampoo niche ($150 – $400) and a built-in bench ($600 – $1,400) are small line items that make the shower usable for decades.
What Walk-In Showers & Shower Remodeling costs in Duncanville, TX
A straight replacement of an old insert with a tiled walk-in shower in Duncanville runs $4,500 – $12,000. When the shower is one piece of a wider Bathroom Remodeling in Duncanville, the full scope usually lands in the $9,000 – $28,000 range. These numbers move on five variables:
- Size and shape. A 36″ x 48″ alcove is the value play. A 60″ x 60″ or larger walk-in with a bench and linear drain pushes to the top of the range.
- Existing condition. Soft framing, rotted subfloor, or a pan that needs to be rebuilt adds $800 – $2,500 in remediation.
- Plumbing relocation. Moving the drain or supply lines is a $500 – $2,000 adder and often triggers a permit requirement.
- Material grade. Ceramic tile at the low end, porcelain and slab panels mid, natural stone at the top.
- Permit scope. Changing only the finish usually skips a permit. Any tie-in to the drain or supply line does not.
Our written estimate is itemized line by line: demo, rough-in, waterproofing, tile, glass, fixtures, permit, and disposal. The number you see is the number you pay unless you approve a change order in writing. It never includes the wider room scope, the vanity, the toilet, or flooring outside the shower footprint. Payments run through 0% financing for 18 months, and projects over $10,000 get $1,000 off. Call (844) 797-4808 for an exact quote on your shower.
See the difference
Before
After
Before
After
Before
AfterWhat Duncanville homes do to a shower project
Duncanville is a built-out, largely post-war bedroom city in southwest Dallas County. Almost every shower job here is a renovation on a home from the 1950s through the 1970s, in ZIP codes 75116, 75137, and 75138. That means tie-ins to aging slabs, cast-iron or early PVC drains, and original electrical that hits modern permitting scrutiny once we open a wall. We routinely inspect the slab and foundation before starting a shower, because the expansive black clay soil under Duncanville heaves and shrinks with wet-dry cycles. A slab crack that runs under the shower pan needs to be addressed before tile goes down, or the grout line will fail within the first year. That foundation line item runs $1,200 – $4,000 when it’s needed, and we price it up front rather than spring it on you mid-job. The local climate matters too: Duncanville summers regularly push past 100°F, which shortens the working window for setting materials, so we schedule tile work early in the day. If you’re redoing the walk-in shower as part of a whole-room change, our Bathroom Remodeling service covers the wider scope, and we’d be glad to handle the whole thing in one written estimate.
Serving Duncanville, TX – Our Local Coverage Area
We serve Duncanville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Walk-In Showers & Shower Remodeling in Duncanville
A standalone shower takes 3 to 8 working days from demo to final walk. The glass fabrication lead time (7 – 10 days) is the one stage that runs in parallel, not in sequence. Call (844) 797-4808 for a project-specific schedule written onto the estimate.
You need a permit whenever the drain or supply lines change. A finish-only refresh that swaps tile or glass usually doesn’t. We spell out who pulls the permit and what the inspection schedule looks like in the written estimate before any work starts. Call (844) 797-4808 to talk through your scope.
Yes, as long as the drain location and rough wall footprint match the new pan. That’s the most common scope in Duncanville, and it keeps the job in the $4,500 – $7,500 range. Only when the drain has to move does the cost step up. Call (844) 797-4808 for a site measure and confirm.
Most walk-in shower installs here run $4,500 – $12,000, and a shower folded into a wider bathroom remodel falls in the $9,000 – $28,000 range. The low end means ceramic tile, a curb, a framed door, and no drain move. The top means slab panels, frameless glass, a bench, and relocated plumbing. Call (844) 797-4808 for an exact quote – estimates are free.
Everything we build is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right, for two full years after the walk-through. Product warranties from the tile, glass, and fixture makers stack on top of that. Call (844) 797-4808 if you want the written guarantee before you decide.
Get a free shower estimate in Duncanville
If you’re ready to plan a walk-in shower, call (844) 797-4808 for a free on-site estimate anywhere in our Duncanville service area. Someone answers live, 24/7. We’ll measure the shower, walk the plumbing, and hand you a written, itemized quote with a firm number on it. Homeowners often pair a shower refresh with a Roof Replacement & Installation in Duncanville or Metal Roofing in Duncanville project so the whole house gets caught up at once.
Written by the team at Groundwork Construction Co.