Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Small & Partial Kitchen Remodels in Grand Prairie, TX: What They Actually Cost and How Long They Take
Small & partial kitchen remodels in Grand Prairie typically run $14,000 – $45,000 and take two to five weeks of working time, depending on whether cabinets are refaced or replaced and whether any plumbing or electrical moves. A partial scope that keeps the layout and reuses the cabinet boxes usually lands nearer the bottom of that range. Call (844) 797-4808 for a written, line-item estimate on your specific kitchen before you commit to anything.
What a partial kitchen remodel really involves, stage by stage
We don’t treat a partial kitchen like a shrunken full remodel. The sequence is different because the goal is to leave the parts that work alone and get in and out without turning your house upside down. Here’s how the work actually runs.
Stage 1: Walkthrough and scope lock (day 1, about 90 minutes)
We open the cabinet doors, pull a drawer or two, check the countertop overhang and the condition of the substrate, and look at where the water lines and outlet circuits land relative to what you want changed. You decide right here what stays and what goes: keep the cabinets and reface, or replace boxes. That single decision drives roughly half the budget. You get a written scope with fixed line items before anyone touches a screwdriver.
Stage 2: Protection and demo (days 2 – 3)
Floors get covered, the fridge gets pulled or masked, and we set up a dust barrier at the kitchen opening. Demo is surgical: cabinet doors and drawers come off, the old countertop comes up, the backsplash comes down. If the wall behind the backsplash is drywall in bad shape, that’s the moment it shows up, and we show you before we fix it. Two days is typical for a partial tear-out on a Grand Prairie kitchen.
Stage 3: Rough-in adjustments and substrate (days 3 – 5)
If you’re moving the sink a few feet, adding a dishwasher circuit, or swapping a range for a cooktop, this is when the rough plumbing and electrical happen, and when the city inspection gets scheduled if the scope requires a permit. We level and shim cabinet boxes here and set the new countertop substrate. You approve the layout of the new sink and faucet at this point, because after the slab goes on it stops being easy to change.
Stage 4: Surfaces and fixtures (days 5 – 12)
Countertop templating happens early in this window, then installation once the slab is cut. Cabinet doors and drawer fronts go on, hardware gets drilled, backsplash tile gets set and grouted, and the new faucet and disposal go in. You pick grout color, hardware finish, and sink style before this stage starts; those choices are cheap now and expensive later.
Stage 5: Punch list and final walk (last day)
We run water, test the disposal and any new outlets, check every door and drawer for alignment, and touch up caulk and paint. You walk the kitchen with us and anything that bothers you goes on a written punch list. Then the 730-Day Done Right Promise starts, and if something isn’t right in the first two years, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll actually be picking between
Most of the money and most of the second-guessing in a partial kitchen comes down to five decisions. Here’s the honest trade-off on each.
- Reface vs. replace cabinets. Refacing keeps the existing boxes and swaps doors, drawer fronts, and veneer. It saves real money, but only if the boxes are square and solid. On a 1960s ranch in 75051 with particleboard boxes that have swelled, replacement is the better spend.
- Laminate vs. quartz countertops. Laminate is the budget move and holds up fine if you’re careful with hot pans. Quartz costs more but resists stains and doesn’t need sealing; it’s the choice most Grand Prairie buyers make when resale is on their mind.
- Sink and faucet grade. A mid-grade Moen or Delta faucet with a solid brass body outlasts the builder-grade unit that came with the house by a wide margin. This is one of the cheapest upgrades per dollar in the whole job.
- Backsplash material. Ceramic tile is the workhorse. Porcelain and glass hold up better to scrubbing and cost more. A full-height slab backsplash looks sharp but eats budget fast.
- Lighting and outlets. Adding under-cabinet lighting and a couple of counter circuits is a small line item that changes how the kitchen feels every single day. If your panel is already full, though, that’s a bigger conversation.
What Small & Partial Kitchen Remodels cost in Grand Prairie, TX
The honest range for this work here is $14,000 – $45,000. A tight partial scope lands near the bottom; a full cabinet swap with new countertops, backsplash, and a sink relocation pushes toward the top. Here’s how the line items break down:
- Cabinet installation: $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation (if you’re adding one): $3,000 – $10,000
Five things move the number. Cabinet grade and whether the boxes get replaced versus refaced. Countertop material and square footage. Whether plumbing or electrical gets relocated, which triggers rough-in work and inspection. The condition hiding behind the old backsplash. And permit scope, since a like-for-like swap may not require one while moving a sink or a circuit does.
A written estimate from us lists every line item with a fixed price, and the number you see is the number you pay. The offer includes a free project estimate and design consult, 0% financing for 18 months, and $1,000 off any project over $10,000. What typically isn’t included: structural repairs if demo reveals rot or a compromised header, appliance costs, and any change you decide on after the countertop is templated.
See the difference
Before
After
Before
After
Before
AfterWhat Grand Prairie homes specifically do to this job
Grand Prairie sits across the line between Dallas and Tarrant counties, and the expansive clay under it is among the most active in North Texas. That combination shapes a partial kitchen more than most homeowners expect. In the older 75050 and 75051 blocks near the old downtown core, we regularly find slab-on-grade ranches that have already been leveled once, and when those floors have moved, cabinet boxes rack out of square and countertop seams crack. Before we set new boxes, we check the floor for level and note any dip that a new cabinet run will amplify.
The dual-county boundary also means permit review can follow a different path depending on which side of the line the house sits. We confirm the jurisdiction before we pull anything, because a homeowner who assumes the wrong county’s process loses weeks. The housing mix in 75054’s newer subdivisions is a different animal entirely: 1990s-to-2010s tract homes where the cabinets are still serviceable and refacing makes far more sense than replacement. Spring hail and high-wind events are another local reality, and homeowners often pair a kitchen refresh with Roof Repair in Grand Prairie after a storm season, or with Small Bathroom Remodels in Grand Prairie when the budget stretches to a second room. If you’re weighing how far the scope should go, it’s worth reading up on Kitchen Remodeling in Grand Prairie to see what a full gut entails. Our Kitchen Remodeling service covers the wider scope, and we handle Grand Prairie across all four ZIP codes: 75050, 75051, 75053, and 75054.
Serving Grand Prairie, TX – Our Local Coverage Area
We serve Grand Prairie and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Small & Partial Kitchen Remodels in Grand Prairie
Most partial remodels here take two to five weeks of working time, with cabinet-only scopes landing near two weeks and full cabinet-plus-countertop-plus-backsplash jobs pushing toward five. Call (844) 797-4808 for a timeline tied to your actual scope.
A like-for-like swap of cabinets, countertops, and backsplash usually doesn’t require one, but relocating a sink, adding a circuit, or moving a gas line does. We confirm which county has jurisdiction and pull the permits that apply, so the work passes inspection. Call (844) 797-4808 and we’ll tell you what your scope triggers.
Yes, and that’s the most common version we build. Keeping the sink, range, and wall positions untouched cuts cost and avoids rough-in work and inspection. Call (844) 797-4808 and we’ll walk your kitchen to confirm what can stay put.
Plan on $14,000 – $45,000, with refacing scopes at the low end and full cabinet swaps with new counters near the high end. The estimate is written line by line, the price is fixed, and $1,000 comes off any project over $10,000. Call (844) 797-4808 for an exact quote; estimates are free.
Every project we complete is covered by the 730-Day Done Right Promise: if it isn’t done right, we make it right, for two full years. Calls are answered by a live person 24/7, and every technician is background-checked and arrives in uniform. Call (844) 797-4808 to schedule your estimate.
Get a free estimate on your Grand Prairie kitchen
We’ll come out, measure your kitchen, look at what’s behind the existing finishes, and hand you a written line-item estimate within a few days. No pressure, no vague ballparks. Financing and the $1,000 project credit can be applied at the same visit. Call (844) 797-4808 to schedule your free estimate and design consult for Small & Partial Kitchen Remodels in Grand Prairie.
Written by the team at Groundwork Construction Co.