Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Coppell, TX: What It Takes and What It Costs
Walk-In Showers & Shower Remodeling in Coppell, TX typically runs $9,000 – $28,000 for a full remodel and $4,500 – $12,000 for a walk-in shower installation alone, with most jobs finished in one to three weeks on site. The schedule holds only if the tile and glass are chosen before demo starts. Call (844) 797-4808 and we’ll walk your bathroom, measure it, and put a written line-item number in your hands before anyone swings a hammer.
How a Walk-In Shower & Shower Remodel Comes Together, Stage by Stage
Every Coppell shower job we run follows the same sequence. The order matters more than the timeline, because a skipped prep step shows up as a cracked pan or a moldy curb two summers later.
Stage 1: Measure and layout (day 1, half a day). We confirm the drain location, the stud-to-stud dimensions, and whether the existing valve and drain can stay put. This is where you decide the footprint: a curbless entry, a low curb, or a standard threshold. We bring a tape and a moisture meter, not a sales pitch.
Stage 2: Demo and substrate (days 1 – 2). Out comes the old tile, glass, and often the original 1980s fiberglass pan. We open the wall around the valve and check for hidden water damage. Most Coppell showers we tear out have some soft drywall behind the backer, and that gets replaced before anything new goes in. You do not have to decide anything here except whether to add a niche or a bench while the wall is open, since doing it now is cheap and doing it later is not.
Stage 3: Rough-in and waterproofing (days 2 – 3). New valve, new drain, sloped mortar bed or a factory pan, then a bonded waterproof membrane over the whole wet area. This is the stage nobody sees and the one that decides whether the shower lasts. We don’t skip the flood test.
Stage 4: Tile and finish (days 3 – 7). Pan tile, wall tile, grout, and a sealing cure before glass goes near it. This is where your material choices from earlier turn into a finished room.
Stage 5: Glass and trim-out (days 7 – 10). Frameless or framed enclosure installed and shimmed, showerhead and controls set, caulk lines finished. We run water and check the drain before we leave.
A simple shower swap lands near that ten-day window. A shower remodel folded into a larger Bathroom Remodeling in Coppell timeline stretches three weeks or more because the floor, vanity, and fixtures move with it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Change Your Shower
You’ll pick between a handful of spec decisions, and each one has an honest trade-off. Here’s what we walk Coppell homeowners through:
- Pan type: tile-over-mortar vs. factory pan. A sloped mortar bed with tile is the most seamless and best for a custom shape, but it costs more and takes longer. A factory acrylic pan installs fast and holds up fine, though the drain is fixed and the look is more utilitarian. Budget difference is $1,200 – $3,000.
- Enclosure: frameless glass vs. framed vs. half-wall. Frameless glass opens the room and suits Cox neighborhoods’ newer rebuilds, but it costs more and needs real cleaning discipline. Framed glass runs a few hundred less and hides the water spots. A half-wall with glass on top gives the most privacy and the least maintenance.
- Tile material: porcelain vs. natural stone. Porcelain is durable, easy to seal, and handles North Texas hard water reasonably well. Marble and travertine look richer but need resealing and show every water mark. Stone can add $1,500 – $4,000 to the same footprint.
- Curbless vs. low curb. Curbless is safer for aging-in-place and works with linear drains, but it needs the floor joists checked and may mean relocating the drain. That’s usually an extra day and roughly $800 – $1,800.
- Fixtures: Kohler vs. builder-grade. Kohler valves and trim hold up and have parts available years out. Cheap imports fail at the cartridge and you can’t find the replacement. The difference on a single valve is small; the difference on a failure is a wall opened up again.
What Walk-In Showers & Shower Remodeling Costs in Coppell, TX
The full walk-in shower remodel range is $9,000 – $28,000. A walk-in shower installation by itself sits at $4,500 – $12,000, and a straight shower replacement lands at $3,000 – $8,500. Those are real Coppell numbers, not a teaser, and our estimates are written line by line so you can see where the money goes.
What pushes a job to the high end? Five things:
- Footprint and shape. A standard 36×60 alcove is the cheapest. A custom 4×6 walk-in with a bench and niche adds finish work on every wall.
- Existing condition. Water damage behind the walls, a rotted subfloor, or a leaking pan turns a swap into a rebuild, and that’s the single biggest surprise on an older Coppell home.
- Moving plumbing or structure. Relocating the drain, cutting out a window wall, or shifting a valve to a different wall all cost extra. If it can stay put, keep it put and put the money in the tile instead.
- Material grade. Porcelain and a stock glass panel vs. marble and a custom frameless enclosure is easily a $6,000 swing on the same footprint.
- Permit scope. A straight tile-and-glass swap usually needs no permit; anything that moves plumbing or electrical does, and the inspection adds time and a small fee.
What’s included in our written estimate: demo, disposal, substrate and waterproofing, tile labor, fixtures you chose, and glass. What’s not: structural repair if we find it after opening a wall, and upgrades you ask for mid-job. We don’t do change orders that surprise you; if something’s found, we quote it before we touch it. Upfront pricing, no surprises, backed by the 730-Day Done Right Promise. Call (844) 797-4808 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterWhy Coppell Showers Wear Differently Than Anywhere Else
Coppell’s housing stock runs from 1980s brick traditional to 2000s transitional on generous lots, with a steady wave of teardown rebuilds filling in around Old Town and the streets near the Coppell ISD schools. That mix means we’re working in two kinds of showers on the same street: original fiberglass pans from the 1980s that are finally failing, and brand-new builds where the homeowner wants a frameless walk-in from day one. Old Town is the tough one. Rebuilds there have to respect the original ranch scale and front setback, the Historic Preservation Society keeps a close eye, and HOA architectural review boards in the surrounding neighborhoods want to see door styles, colors, and trim matched before anything goes in. If you’re changing an exterior window or door as part of the shower project, get the ARB packet approved first, because a replacement that doesn’t match the community standard gets a violation notice. The blackland clay under these slabs also means foundations move cyclically, so we set flexible connections and check drain alignment before we tile. In Cox and the older stretches near the schools, a shower pan that started as a hairline crack in 2009 is often a full replacement today. We cover all of Coppell and the ZIPs 75019 and 75099.
Serving Coppell, TX – Our Local Coverage Area
We serve Coppell and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Walk-In Showers & Shower Remodeling in Coppell
A single shower runs 7 – 10 working days from demo to glass; a full shower remodel tied to a larger bathroom job runs two to three weeks. The schedule slips most often on glass lead time, so we order the enclosure as soon as the layout is final. Call (844) 797-4808 to get a real timeline for your shower.
A tile-and-glass swap in the same footprint usually needs no permit. Anything that moves the drain, valve, or electrical does. We pull the permits and pass the inspections, and we tell you up front which side of that line your job falls on.
Yes, in most cases. If the existing drain and valve sit in the right spot, we build the new shower around them, which keeps the project simpler and the price in the lower half of the $4,500 – $12,000 range. A curbless design is the one that usually forces a drain move.
Walk-In Showers & Shower Remodeling in Coppell runs $9,000 – $28,000 for the full job, with a standalone walk-in shower at $4,500 – $12,000. Call (844) 797-4808 for an exact quote, and note we offer $1,000 off projects over $10,000 plus 0% financing for 18 months.
Every shower we build is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right, for two years. That covers workmanship, waterproofing, and install, which is where most shower complaints originate. Call (844) 797-4808 with questions any time, day or night; a live person answers.
Get a Free Estimate on Your Coppell Walk-In Shower
We’ll come out, measure the shower, and look at what’s behind the wall. You’ll get a written line-item estimate with your material choices priced in, so you can see what porcelain vs. stone costs before you commit. If your project grows into a full bathroom, our Bathroom Remodeling team can fold it in, and homeowners often pair the remodel with a Roof Replacement & Installation in Coppell or Metal Roofing in Coppell while we’re out. Call (844) 797-4808 for your free estimate. A live person answers 24/7.
Written by the team at Groundwork Construction Co.