Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Farmers Branch, TX: What It Costs and How Long It Takes
Walk-In Showers & Shower Remodeling in Farmers Branch runs $9,000 – $28,000, with most curbless or low-threshold jobs landing between $12,000 and $18,000 once tile, glass, valve work, and permits are counted. Plan on 2 to 4 weeks from demo to final inspection for a standard hall bath, longer if we’re relocating the drain or opening a load-bearing wall. Call (844) 797-4808 for a free on-site estimate and a written line-item quote before anything gets torn out.
The order we work in, and what you decide at each stop
Shower work fails more often from sequencing than from tile choice. Here’s the actual order for a Farmers Branch job, and where your decisions land.
Day 1 – Demo and discovery (1 day). We pull the old surround, tub, or pan down to the studs and shut off water at the fixtures. This is the day surprises surface: rotted subfloor near the drain, a valve that’s been weeping behind the wall, or framing that’s been wet for years. You decide nothing here except to approve any hidden-damage line item before we proceed.
Day 2 – 3 – Rough-in and inspections (2 – 3 days, plus inspection scheduling). We relocate the drain if the layout calls for it, set the new valve, hang and tape cement board, and get the rough plumbing inspected. If we’re converting a tub alcove to a curbless walk-in, this is where the subfloor gets notched or built up to get the slope right. You confirm the valve brand and trim at this stage, since the rough-in has to match it.
Day 4 – 6 – Waterproofing (2 – 3 days). A bonded waterproof membrane goes on the walls and pan, with the seams and corners banded. This is the stage most cheap shower jobs skip or rush, and it’s the number one reason showers leak into the room below. You don’t decide anything here, but ask to see it done before tile goes up.
Day 7 – 12 – Tile and setting (5 – 6 days). Pan tile first, then walls, then the niche and bench. Large-format tile and mosaic pans take longer than a 12×24 field tile. You lock in the tile layout and grout color before this stage starts, not during it.
Day 13 – 15 – Glass, trim, and final inspection (2 – 3 days). Frameless glass gets templated after tile is set and installed a few days later, so there’s a natural gap here. Final plumbing inspection, caulk, and a full water test close it out. You walk through with us before the last day.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
What you’ll actually choose between
The choices below move the price more than square footage does. Each has a trade-off worth knowing before you pick.
- Curbless vs. low-curb pan. Curbless is the cleanest look and the safest for aging in place, but it requires notching the joists or building up the floor to get slope, which adds labor and sometimes a structural consult. A 4-inch low curb is far less work and still easy to step over.
- Tile size and material. Porcelain 12×24 is the value sweet spot and holds up to hard water. Marble and natural stone look richer but need sealing and show every water spot. Large-format slab tile cuts grout lines to almost nothing and adds cost.
- Frameless vs. semi-frameless glass. Frameless is the upgrade most homeowners notice daily, since it opens the visual space. Semi-frameless saves money but the metal channel collects soap scum.
- Linear drain vs. center drain. A linear drain lets the whole floor slope one direction, which is what makes a true curbless shower work. Center drains are cheaper and fine for a curbed pan.
- Bench, niche, and grab bars. A built-in tiled bench, recessed niche, and blocking for future grab bars add cost but are cheapest to add now, while the walls are open. Retrofitting a bench later means tearing out tile.
Kohler and similar valve brands are worth the small premium here, because a $200 valve buried behind $3,000 of tile is the wrong place to save.
What Walk-In Showers & Shower Remodeling costs in Farmers Branch, TX
The full range is $9,000 – $28,000, and a few specific variables decide where your job lands.
| Scope | Typical range |
|---|---|
| Walk-in shower only (existing footprint, standard tile) | $4,500 – $12,000 |
| Tub-to-shower conversion, same plumbing location | $3,500 – $10,000 |
| Full shower remodel with glass, bench, and tile upgrade | $9,000 – $28,000 |
| Shower replacement (in-kind swap) | $3,000 – $8,500 |
What pushes a job to the high end: relocating the drain or valve (adds rough-in labor and inspection), a curbless pan that needs joist work or a structural consult, large-format or natural stone tile, a frameless glass enclosure, and hidden rot or a failing valve found at demo. What keeps it low: keeping the shower in its existing footprint, porcelain field tile, a low curb, and a semi-frameless door.
A written estimate from us lists demo, rough-in, waterproofing, tile, glass, and permit fees as separate lines, so you see exactly what’s included. What typically isn’t: hidden damage behind the wall (we quote it before doing it), and any structural work if it turns out the floor needs reinforcement.
See the difference
Before
After
Before
After
Before
AfterWhat Farmers Branch homes specifically do to this job
Farmers Branch is a small, fully built-out inner-ring suburb (ZIP 75234) with almost no new residential land left, so this is a renovation town, not a subdivision town. The core housing stock is mid-century ranch homes and post-war cottages from roughly the 1950s to 1970s, and those are exactly the bathrooms we’re tearing into. Two things show up on nearly every job here. First, the original showers were built with mud-set pans and thin tile over framing that’s now 50-plus years old, so we plan for rot around the drain and a valve that predates current code. Second, Farmers Branch enforces permits tightly on older properties, so we pull the plumbing and structural permits and schedule the inspections rather than skipping them. The expansive Blackland Prairie clay under these homes also moves between droughts and wet springs, which is why a shower with a cracked pan or a floor that’s settled along the drain is common. Homes near the Brook Hollow/Marsh Lane area at the Dallas line, and properties along the Valley View corridor, are where we see the most mid-century ranch conversions.
Serving Farmers Branch, TX – Our Local Coverage Area
We serve Farmers Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Walk-In Showers & Shower Remodeling in Farmers Branch
Most jobs run 2 to 4 weeks from demo to final inspection, and the glass template wait in the middle is the biggest cause of variation. Call (844) 797-4808 and we’ll give you a dated schedule with the estimate, not just a range.
Yes, if we’re moving plumbing or a valve or doing structural work, a permit and inspection are required. We handle the permit and inspections as part of the job, and cosmetic tile over an existing pan usually doesn’t trigger one. Call (844) 797-4808 and we’ll tell you exactly what your scope needs.
Often, yes. Keeping the drain and valve in their existing location is the single biggest cost saver and usually drops the job toward the low end of the range. Call (844) 797-4808 and we’ll check your layout during the free estimate.
The full range is $9,000 – $28,000, with a shower-only job closer to $4,500 – $12,000 and a full remodel with glass and a bench at the higher end. Call (844) 797-4808 for an exact quote; estimates are free.
Every shower we build is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. Call (844) 797-4808 to start your free estimate.
Get a free estimate for your Farmers Branch shower
This is the kind of job that hides problems until the tile comes down, so the number matters less than knowing what’s behind the wall before you commit. Call (844) 797-4808 and we’ll schedule a free on-site estimate, measure the shower, walk through the layout and material choices, and leave you with a written line-item quote. We answer live, around the clock. If this is part of a wider project, see our Bathroom Remodeling in Farmers Branch, and for the rest of the region, our Farmers Branch service page.
Homeowners here often pair a shower upgrade with exterior work while we’re on site, like Roof Replacement & Installation in Farmers Branch or Metal Roofing in Farmers Branch. And if you’re weighing the whole bathroom rather than just the shower, our Bathroom Remodeling hub lays out the broader scope.
Written by the team at Groundwork Construction Co.