Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Duncanville, TX: What the Job Costs and How Long It Takes
Backsplash, tile & flooring work in Duncanville typically runs $14,000 – $45,000 for a full kitchen tile and flooring package, with a standalone backsplash at $800 – $2,500 and most jobs taking two to four weeks once materials are on site. Call (844) 797-4808 for a free on-site estimate with a written, line-item quote – the number you see is the number you pay, and every job carries our 730-Day Done Right Promise. Exact cost depends on square footage, what’s under the old tile, and how far the plumbing or electrical has to move.
How a tile and flooring job actually runs, start to finish
Most contractors describe this work in a single sentence. The honest version is five stages, and you’re making a decision at almost every one. Here’s how it plays out in a Duncanville kitchen.
Stage 1: Demo and tear-out (1 – 2 days)
We pull the old backsplash, cut out failing flooring, and haul it off. This is where surprises surface. On a 1960s Duncanville slab, that might mean a soft patch of thinset over a hairline crack, or a section of subfloor that’s seen moisture. You don’t decide anything yet, but you get photos and a straight account of what we found before we go a dollar further.
Stage 2: Surface prep and leveling (1 – 2 days)
Flat is the whole game with tile. We grind high spots, fill low ones, and prime the substrate. On slab-on-grade floors we check for movement and cracks first. If the slab has shifted, that’s a conversation about crack isolation membrane or a repair before the tile goes down. You decide whether to add isolation or accept the risk, and we tell you which we’d pick.
Stage 3: Layout and material decision (1 day)
This is where you lock in the look. We lay out tile on the floor so you can see grout lines, where cuts land, and how the pattern reads in your light. Herringbone, stack bond, running bond, large-format, penny round: each one changes both the labor and the final price. You approve the layout in writing before a single tile is set.
Stage 4: Setting tile and backsplash (3 – 5 days)
Floor goes first, then backsplash, because the cabinets and outlets need to be accounted for. We set with the right thinset for the material (large-format porcelain and natural stone want different products), build in expansion gaps at the perimeter, and cut around outlets cleanly. Under-cabinet lighting or outlet relocations get handled in this window, so tell us early if you want those.
Stage 5: Grout, seal, and final walk (1 – 2 days)
Grout goes in after the thinset cures fully. Natural stone gets sealed. We caulk the transition where tile meets cabinet or wall, clean up, and walk the job with you. Any punch items get fixed before we call it done, and the 730-Day Done Right Promise covers the workmanship after we leave.
Total for a typical Duncanville kitchen: two to four weeks, with a hard pause built in for material lead times. Planning a broader scope at the same time? Homeowners often fold this into Kitchen Remodeling in Duncanville so demo and permits happen once.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between, and the honest trade-offs
You’ll make roughly a dozen material calls. Here’s what actually matters and what each one costs you in money and upkeep.
- Porcelain vs. ceramic floor tile: Porcelain is denser, handles moisture and heavy traffic better, and runs $4 – $12 per square foot installed. Ceramic is cheaper at $3 – $7 but chips more easily. For a kitchen floor you’ll walk on for twenty years, porcelain wins.
- Large-format vs. mosaic: Large-format tile (12×24 or bigger) reads cleaner with fewer grout lines and costs more in labor because it’s harder to set flat. Mosaic and penny round cost less in material but more in labor per square foot. Pick large-format for a modern look, mosaic for a backsplash accent.
- Natural stone vs. manufactured: Marble and travertine look rich, need sealing, and stain if you’re careless with tomato sauce. Quartz-look porcelain gives you the same visual for less maintenance and less money.
- Grout and sealer grade: Epoxy grout costs more up front but resists stains and doesn’t need resealing. Cementitious grout is cheaper and needs sealing every couple of years. In a hot, humid North Texas kitchen, epoxy is usually worth it.
- Flooring beyond tile: Luxury vinyl plank and engineered hardwood are options if tile isn’t your floor of choice. LVP handles moisture and pets well; hardwood looks warmer but moves with humidity.
Brands we work with on tile and setting materials include Oldcastle and Quikrete, and we’ll spec what suits your budget rather than what’s on the shelf. Full selections happen at the design consult for our Kitchen Remodeling service.
What Backsplash, Tile & Flooring costs in Duncanville, TX
Here’s the pricing picture, straight:
| Item | Typical range |
|---|---|
| Backsplash installation | $800 – $2,500 |
| Kitchen floor tile (installed) | $4 – $12 per sq ft |
| Full kitchen tile & flooring package | $14,000 – $45,000 |
Five things push a Duncanville job from the low end to the high end:
- Square footage. A small galley kitchen and a large open-plan kitchen are different jobs entirely.
- Existing condition. Cracked slab, soft subfloor, or old thinset that won’t come up cleanly adds labor.
- Plumbing or electrical moves. Relocating an outlet or a sink line mid-tile means rework.
- Material grade. Budget porcelain and premium marble live at opposite ends of the same job.
- Pattern complexity. Herringbone and intricate layouts cost more in labor than straight-set.
A written estimate covers demo, prep, materials, setting, grout, and cleanup. It usually doesn’t cover structural slab repair or hidden moisture damage, which we quote separately once we open the floor. Call (844) 797-4808 for a free estimate and a written line-item quote.
See the difference
Before
After
Before
After
Before
AfterWhat Duncanville homes specifically do to this job
Duncanville is a built-out, largely post-war bedroom city in southwest Dallas County. Nearly every tile job here is renovation on a 1950s – 1970s brick-veneer ranch on a slab foundation, across ZIPs 75116, 75137, and 75138. That’s not greenfield building, and it changes the work. On these slabs, the expansive black clay soil heaves and shrinks with every wet-dry cycle, so hairline cracks in the kitchen floor are routine. Before we set tile, we check the slab and price any crack isolation membrane or repair as its own line item – the kind of thing that doesn’t show up on a new-build job in Midlothian.
Inside the walls, we’re tying into aging cast-iron or early PVC drains and original electrical panels, which matters when you move a sink or add outlets for the backsplash. Older Duncanville homes also need permits and inspections that modern construction doesn’t, and we pull them so the inspection passes. The climate plays in too: hot, humid summers and moderate winter freezes mean tile and grout move, which is why expansion gaps and the right sealer matter. Hail and wind events aren’t a tile problem, but they’re the reason we check attic ventilation during a remodel. We cover all of Duncanville, and homeowners often pair this with Vanities, Tile & Fixtures in Duncanville to finish the kitchen and bath together.
Serving Duncanville, TX – Our Local Coverage Area
We serve Duncanville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Backsplash, Tile & Flooring in Duncanville
Most Duncanville tile and flooring jobs take two to four weeks, with a pause for material lead times. A backsplash alone can finish in two to three days. Call (844) 797-4808 for a timeline built around your materials.
Simple tile and flooring replacement usually doesn’t require a permit, but moving plumbing or electrical does. We pull the permit and pass the inspection when the work crosses that line. Call us and we’ll tell you upfront which side your job falls on.
Yes. A backsplash swap doesn’t touch plumbing or framing at all. The only thing that can complicate it is relocating an outlet, which is a small electrical add. Call (844) 797-4808 and we’ll quote both scenarios.
Backsplash runs $800 – $2,500 and a full kitchen tile and flooring package runs $14,000 – $45,000, depending on square footage, slab condition, and material grade. Call (844) 797-4808 for an exact quote, free with a written line-item estimate.
Every tile and flooring job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space. Call (844) 797-4808 to get started.
Get a free estimate for Backsplash, Tile & Flooring in Duncanville
We’ll come out, measure the space, check the slab, and hand you a written line-item estimate for your backsplash, tile & flooring in Duncanville – no surprises, with $1,000 off any project over $10,000 and 0% financing for 18 months available. Call (844) 797-4808 and a live person answers, 24/7. We’ll book your on-site estimate and walk you through what your kitchen actually needs.
Written by the team at Groundwork Construction Co.