Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Dallas, TX: What It Takes and What It Costs
Walk-in showers & shower remodeling in Dallas typically runs $9,000 – $28,000 for a full bathroom rebuild around the new shower, or $4,500 – $12,000 when the work is a standalone walk-in shower install. Most jobs take 2 to 4 weeks from demo to final walkthrough, and the biggest cost drivers are whether we move the drain, whether the walls are sound behind the old tile, and what you pick for glass and tile. Call (844) 797-4808 for a free on-site estimate.
How We Take a Dallas Shower From Demo to Final Walkthrough
Every walk-in shower project follows the same sequence. The order matters, and the homeowner has a real decision to make at each stage. Here’s the timeline you can plan around.
Stage 1: Site visit and written scope (day 0)
We measure the shower footprint, check the drain location and the existing valve, and look at what’s behind the wall where possible. You get a written, line-item estimate with the shower size, tile, glass, drain type, and any plumbing changes spelled out. This is also where we flag whether a permit will be required. If your shower is part of a larger Bathroom Remodeling in Dallas, we scope the shower as one line item inside the bigger plan.
Stage 2: Demo and tear-out (days 1 – 2)
We pull the old shower pan, tile, and backer board down to the studs and subfloor. On Dallas slab-on-grade homes, this is where surprises turn up: a pan that was set on drywall instead of cement board, a drain that’s been leaking into the slab edge, or old galvanized supply lines behind the wall. We photograph everything and tell you before we rebuild. Nothing gets covered back up without your sign-off on anything the estimate didn’t already cover.
Stage 3: Rough-in and inspection (days 3 – 5)
New drain, new valve, new supply lines if needed, and blocking for grab bars and a bench. If we’re moving the drain or relocating the shower within the room, this is when the plumber does it. Rough plumbing and any framing changes get inspected before the walls close up. On a straight replacement with no drain move, this stage is often a single day.
Stage 4: Waterproofing and tile (days 6 – 12)
This is the stage that decides whether the shower lasts 8 years or 30. We build a sloped pan, install a bonded waterproofing membrane over cement board, and flood-test before tile goes down. Tile setting, grouting, and curing come next. Large-format porcelain goes up faster than small mosaic; a herringbone pattern takes longer. You’ll want to lock your tile and grout selections before day 6 so nothing stalls.
Stage 5: Glass, fixtures, and walkthrough (days 13 – 16)
Tempered glass panels get templated once tile is set, then installed a few days later. Showerhead, valve trim, and any niche shelving go in on the final day. We walk the shower with you, run it, check the slope and drain, and hand over the written 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between, and What Each One Costs You
Most of the real decisions on a walk-in shower come down to five choices. Here’s what moves the number and who each option suits.
- Shower base: tile-over-pan vs. preformed acrylic. A custom-tiled pan matches the floor and gives you an exact size, but it adds roughly $1,500 – $3,000 and needs experienced waterproofing. A preformed acrylic base is faster and cheaper, but you’re limited to stock sizes and it won’t match a tile floor.
- Glass: frameless vs. framed vs. half-wall. Frameless tempered glass is the most popular upgrade and runs $1,200 – $2,800 depending on panel count and door type. Framed glass costs less. A tiled half-wall with no glass works well for larger showers and cuts cleaning.
- Tile: porcelain vs. natural stone. Porcelain is durable, waterproof, and easy to maintain. Natural stone (marble, travertine) looks richer but needs sealing and shows water spotting. Porcelain in large format is the practical pick for most Dallas homes.
- Fixtures: Moen or Delta vs. builder-grade. A Moen or Delta valve and trim set is a workhorse with a wide parts network. American Standard offers solid value on showerheads and valve trim. Going premium on the valve matters more than going premium on the head.
- Layout: curbless vs. curbed. A curbless shower is fully accessible and looks clean, but it requires lowering the drain or raising the floor, which adds cost and roughly a day of framing. A low curb is the standard trade-off.
What Walk-In Showers & Shower Remodeling Costs in Dallas, TX
Expect $9,000 – $28,000 for a shower-driven bathroom rebuild, or $4,500 – $12,000 for a standalone walk-in shower install. The spread comes down to five variables.
- Shower size. A 36″ x 48″ alcove replacement sits at the low end. A 5′ x 6′ walk-in with a bench and dual showerheads pushes toward the top.
- Existing condition. Dry rot, a leaking pan, or old galvanized lines behind the wall add real money. We flag this at demo, not at invoice.
- Plumbing and electrical moves. Relocating a drain or adding a ceiling rain head means new rough-in and a longer inspection window.
- Material grade. Porcelain vs. marble, frameless vs. framed glass, custom vs. stock base – these stack quickly.
- Permit scope. A permit and rough-in inspection add cost but protect you at resale.
Your written estimate includes demo, waterproofing, tile and labor, glass, and fixture installation. It does not include structural repairs discovered behind the wall, nor upgrades you add after sign-off – both of which we quote before doing the work. No-hassle upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Dallas Homes Specifically Do to This Job
Dallas sits on Blackland Prairie clay, and that clay doesn’t stay still. Expansive vertisols swell in wet springs and shrink through dry summers, which is why foundation movement shows up in shower tile as hairline cracks along the pan edge and grout lines that open up over a few seasons. We check for that before we tile. Most of our Dallas shower work is inside 1950s – 70s slab-on-grade ranch homes in areas like Oak Cliff, East Dallas, and Lake Highlands, plus newer builder-grade stock in the northern suburbs where the original shower was a 30-inch fiberglass insert. Permitting runs through the City of Dallas, and any drain relocation or valve change gets inspected at rough-in. Our trained technicians check the subfloor and wall framing before we waterproof – a shower built over a moving slab needs a flexible pan detail, not a rigid one.
Serving Dallas, TX – Our Local Coverage Area
We serve Dallas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in Dallas
Most walk-in shower projects in Dallas take 2 to 4 weeks from demo to final walkthrough. A straight replacement with no plumbing moves can finish in about 10 working days; a curbless install or a job that ties into a larger remodel runs longer. Call (844) 797-4808 for a firm timeline on your shower.
Yes – if we move the drain, change the valve, or relocate fixtures, a plumbing permit and rough-in inspection are required in Dallas. A cosmetic tile-only refresh may not need one. We tell you at the estimate which side your job falls on, and we pull the permit and pass the inspection before anyone sees a bill.
Most of the time, yes. If the drain and valve stay where they are and the walls are sound, we can build a walk-in shower in the existing footprint. The limits are a shower that’s too narrow for a comfortable entry and a drain that’s dangerously off-center. We check both during the site visit.
A standalone walk-in shower install in Dallas runs $4,500 – $12,000. A full bathroom rebuild around the new shower runs $9,000 – $28,000. Glass, tile grade, drain relocation, and the condition behind the wall are the four things that move the number most. Call (844) 797-4808 for an exact quote – estimates are free.
Every walk-in shower we build is covered by the 730-Day Done Right Promise. If the waterproofing, tile, or glass isn’t right within that window, we make it right. That’s in writing, not in a handshake.
Get a Free Walk-In Shower Estimate in Dallas
If you’re planning a walk-in shower or shower remodel in Dallas, the smartest next step is a free on-site estimate. We’ll measure the space, look at what’s behind the wall, and give you a written, line-item price with no surprises. Call (844) 797-4808 – a live person answers 24/7. If your project touches the rest of the house, homeowners often pair a shower rebuild with our Bathroom Remodeling service, Roof Replacement & Installation in Dallas, or Metal Roofing in Dallas. We serve the whole Dallas area, including Highland Park, University Park, Duncanville, and Irving.
Written by the team at Groundwork Construction Co.