Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Highland Park, TX: What the Job Really Involves
Walk-In Showers & Shower Remodeling in Highland Park, TX runs $9,000 – $28,000 for a full bath, with a standalone curbless walk-in shower alone typically landing between $4,500 and $12,000. Most Highland Park shower remodels take two to four weeks from demo to final seal, assuming the town permit clears and no hidden plumbing surprises surface behind the old tile. Call (844) 797-4808 for a free on-site estimate and a written line-item quote before any work begins.
How We Build a Walk-In Shower, Stage by Stage
A shower is a small room that has to hold water for decades. The sequence below is what keeps that promise, and it’s the same one we run whether the job sits in a 1928 Tudor off Lexington Avenue or a rebuilt home near Armstrong Parkway.
Stage 1: Assessment and demolition (days 1 – 2)
We shut off water, protect the surrounding floors, and pull the old shower down to the studs. On Highland Park homes this stage routinely turns up the real story: galvanized supply lines past their prime, cast-iron drains with cracks, or framing that’s been wet longer than anyone realized. You’ll get photos and a straight conversation about what we found before we go further.
Stage 2: Rough-in and framing (days 3 – 5)
This is where plumbing gets moved (if you’re relocating the drain, valve, or bench), blocking gets added for grab bars, and the subfloor gets leveled. If you want a curbless shower, this is the decision point that matters most: it requires recessing the floor structure or building up the surrounding floor, and you have to lock that choice in before tile is ordered. We don’t cut structural members without engineering, especially in older homes where the joists are fir and already carrying a century of load.
Stage 3: Waterproofing and inspection (days 6 – 8)
We install a bonded waterproofing membrane over a sloped mortar bed, then flood-test the pan and get the town inspection signed off. This is the stage nobody sees and the one that decides whether your shower leaks in year three. Highland Park’s building department inspects the pan and the drain connection, so we schedule that visit and don’t tile until it passes.
Stage 4: Tile and glass (days 9 – 16)
Wall tile, floor tile, niche work, and the curb go in, followed by grout and sealant cure time. You’ll pick your glass at this stage – framed, semi-frameless, or frameless – and the enclosure gets templated and installed after tile is complete. Budget three to five business days for glass fabrication on custom sizes.
Stage 5: Fixtures and final walkthrough (days 17 – 21)
Showerhead, valve trim, drain cover, and any bench or niche accessories go in, then we run a full water test and walk the job with you. The whole project closes out with our 730-Day Done Right Promise in writing – if something isn’t right, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Every walk-in shower comes down to a handful of decisions. Here’s the honest trade-off on each one.
- Curb vs. curbless: A curb is faster and cheaper and keeps the water where it belongs; curbless looks cleaner and ages better for anyone with mobility concerns, but it adds $2,000 – $5,000 for the floor recess and waterproofing work.
- Tile material: Porcelain is the workhorse – durable, low-maintenance, and priced fairly. Natural stone (marble, travertine) looks stunning but needs sealing every year or two and doesn’t love North Texas humidity swings. Large-format porcelain slabs mean fewer grout lines to scrub.
- Glass enclosure: Frameless glass reads as high-end and lets light through, but it costs more and needs a structural check on older walls. Semi-frameless and framed options hold up well and cost less.
- Linear vs. center drain: A linear drain lets you use bigger tiles with a single slope and gives a sleeker floor look; it adds cost and complexity. Center drains are simpler and proven.
- Shower systems and fixtures: Standard pressure-balance valves get the job done; thermostatic valves with multiple body sprays give you better temperature control and more showerheads, at a higher price. Kohler fixtures are a common pick for a balance of reliability and finish options.
What Walk-In Showers & Shower Remodeling Costs in Highland Park, TX
Expect $9,000 – $28,000 for a full shower remodel in Highland Park, or $4,500 – $12,000 if you’re doing a single walk-in shower installation inside an otherwise finished bathroom. Here’s how a project lands where it does:
| Scope | Typical Range |
|---|---|
| Walk-in shower installation (single shower) | $4,500 – $12,000 |
| Shower replacement (like-for-like) | $3,000 – $8,500 |
| Full bathroom remodel with walk-in shower | $9,000 – $28,000 |
Five things push a Highland Park shower job toward the top of that range: relocating the drain or supply lines, needing to repair or replace old plumbing found behind the tile, going curbless (extra floor structure work), natural stone or custom glass, and any structural change that triggers design review. The low end is a standard-size shower, same footprint, porcelain tile, semi-frameless glass, no plumbing relocation.
Our written estimate itemizes demo, framing, plumbing rough-in, waterproofing, tile, fixtures, glass, permit fees, and labor so you can see exactly where the money goes. What it doesn’t cover: hidden damage discovered after demo, upgrades you add mid-project, or permit-related design review if your home requires it. We price up front and don’t change the number unless you approve a change order in writing. 0% financing for 18 months and $1,000 off projects over $10,000 are both standing offers.
See the difference
Before
After
Before
After
Before
AfterWhat Highland Park Homes Specifically Do to This Job
Highland Park is almost fully built out, and nearly every job here is a renovation, not new construction. That changes how a shower remodel runs. Work is permitted through the Town of Highland Park, not Dallas, and the town’s own design review and lot-coverage rules apply – which means a shower project that touches walls or framing can drag in a review process that a contractor used to Dallas codes won’t build into the schedule. The housing stock compounds it: 1910s – 1930s Tudor, Colonial, and Mediterranean homes on small lots, many expanded or rebuilt lot-line to lot-line, so behind the tile you’ll often find original galvanized plumbing, old wiring, and framing that’s seen a century of the expansive clay soils shifting under the foundation.
The North Texas climate matters directly. Foundation movement from the clay shows up as cracked tile and shower pans that no longer slope right, and the severe spring hail and windstorms we get here cause exterior damage while the inside shower stays neglected. That’s why homeowners often pair this with Roof Replacement & Installation in Highland Park when they’re already inside the walls. The mature pecan and live oak canopy over narrow streets also means material deliveries and glass installs need coordination with the town, since deliveries sometimes require tree-protection plans or street closures. If your project grows past the shower, see our Bathroom Remodeling in Highland Park page for the wider scope – and for exterior resilience work, Metal Roofing in Highland Park is worth a look while we’re on site. We cover all of Highland Park, and our Bathroom Remodeling service is the door to the full vertical.
Serving Highland Park, TX – Our Local Coverage Area
We serve Highland Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in Highland Park
Most walk-in shower remodels take two to four weeks, split roughly into two days of demo, three days of rough-in and framing, three days of waterproofing and inspection, a week of tile and glass, and a few days of fixtures and walkthrough. A single shower inside a finished bathroom can run 10 to 14 days; a full bathroom with a walk-in shower runs closer to three to four weeks. Call (844) 797-4808 for a schedule that matches your home.
Yes – a shower remodel that moves plumbing, changes the drain, or alters framing requires a permit through the Town of Highland Park, and the waterproofing pan gets inspected before tile goes in. A cosmetic tile-and-fixture change with no plumbing or structural work sometimes doesn’t. We pull the permit, carry the inspection, and hand you the signed-off paperwork. Permits are part of our written quote, not an extra.
Yes, and it’s the most cost-effective route – around $4,500 – $8,500 on the low end. Keeping the drain and supply in the same spots avoids plumbing rough-in and structural work. Going curbless or relocating the drain adds $2,000 – $5,000 depending on the floor structure. We’ll tell you at the estimate which is realistic for your home.
A single walk-in shower installation runs $4,500 – $12,000; a full shower remodel inside a bathroom project runs $9,000 – $28,000. Curbless conversion, natural stone, custom glass, and plumbing relocation push toward the top of the range. Call (844) 797-4808 for an exact quote – estimates are free and itemized.
Every walk-in shower project comes with our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction – if it’s not done right, we make it right for two full years. Product warranties on fixtures and glass come from the manufacturer separately. Ask for the written terms at estimate; there’s no fine print to hunt for.
Get Your Free Walk-In Shower Estimate in Highland Park
If you’re planning Walk-In Showers & Shower Remodeling in Highland Park, start with a free on-site estimate. Call (844) 797-4808 – a live person answers 24/7, not voicemail – and we’ll set a time that works. On the visit we measure, inspect what’s behind the wall as far as we can without demo, and hand you a written line-item quote. No pressure, no surprises, just what the job actually takes.
Written by the team at Groundwork Construction Co.