Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Highland Park, TX: What the Job Runs
Vanities, tile & fixtures in Highland Park, TX runs $9,000 – $28,000 for a full bathroom’s worth of vanity replacement, floor and wall tile, and new fittings, and most of these jobs finish in 2 – 3 weeks once material is on site. A vanity-only swap with tile repairs sits at the low end; a gutted shower surround, full floor tile, and relocated plumbing push toward the top. Call (844) 797-4808 for a free on-site estimate with a written line-item quote.
How We Run a Vanity, Tile & Fixtures Job, Stage by Stage
This is a finish trade, which means the schedule lives or dies on material lead times and on what’s hiding behind the old tile. Here’s the sequence we hold to in Highland Park homes.
Stage 1: Measure, select, and lock the order (days 1 – 3)
We template the vanity against actual wall conditions, not the drawing, then walk you through tile and fixture selections. You decide vanity width and depth, countertop material, tile layout, and whether the floor gets heated. This is also when we order: vanities and countertops typically take 2 – 3 weeks to arrive, tile 1 – 2 weeks, fixtures 3 – 7 days. Nothing gets demoed until material is confirmed.
Stage 2: Demo and open up (1 – 2 days)
Old vanity out, tile removed, and the substrate exposed. This is the moment of truth in a 1920s Highland Park bath: we’re looking at the condition of the wallboard, whether the drain and supply lines are where we thought, and whether there’s water damage behind the tile from a decades-old leak. You see photos before we go further.
Stage 3: Rough-in and prep (2 – 4 days)
If the vanity is moving, plumbing and electrical get rerouted, then inspected. Cement board goes down on the floor and behind the shower walls, waterproofing membrane gets rolled and cured, and the floor gets leveled. On clay-soil homes we check subfloor flatness here; a floor that’s out of plane will telegraph through large-format tile no matter how good the setter is.
Stage 4: Tile and set (3 – 5 days)
Floor tile goes down first, then wall and shower tile, then grout and seal. Large-format tile and intricate patterns take longer than a straightforward grid. Glass or stone mosaics on a shower floor need extra cure time before grouting.
Stage 5: Vanity, fixtures, and final (2 – 3 days)
Vanity set and leveled, countertop dropped and sealed, sink, faucet, shower trim, and accessories installed, then a water test and a punch walk. You sign off against the written spec, not a verbal promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make on This Job
Half the final number comes from four decisions. Here’s the honest trade-off on each.
- Vanity construction: furniture-grade plywood and solid wood boxes hold up in a humid bath and run $800 – $3,000 installed; MDF boxes cost less but swell at the edges over time. KraftMaid and Kohler lines give you a real range of sizes and finishes without custom pricing.
- Countertop: quartz (Cambria and similar) resists stains and needs no sealing; natural stone looks richer but wants annual sealing; cultured marble is the budget pick and scratches easier.
- Floor tile: porcelain is the workhorse, dense and forgiving of North Texas humidity swings; natural stone (travertine, marble) is beautiful and softer, and wants sealing; large-format 24×24 reduces grout lines but demands a flat substrate.
- Shower wall tile and fixtures: ceramic subway is timeless and cheap to replace; slab or large-format porcelain reads modern; brushed nickel and matte black finishes hide water spots better than polished chrome.
Where it fits, we spec Oldcastle and Sakrete setting materials for consistent cure and bond. Add these to a broader scope and it’s worth reading our Bathroom Remodeling in Highland Park page, since tile and fixtures are often the last phase of a larger renovation.
What Vanities, Tile & Fixtures Costs in Highland Park, TX
Expect $9,000 – $28,000 for the full package: vanity, countertop, floor and wall tile, shower surround, and fixtures. Vanity-only jobs land near $800 – $3,000 for the cabinet and set. Here’s what moves the number:
- Footprint and tile area: a 5×8 bath and a 10×12 bath aren’t the same job; tile is priced by the square foot plus waste factor.
- Condition behind the wall: rotted subfloor, failed waterproofing, or galvanized supply lines add days and dollars.
- Relocating plumbing or electrical: moving a drain or adding a GFCI circuit runs more than replacing in place.
- Material grade: porcelain vs. natural stone, standard vanity vs. custom, builder faucet vs. premium fixture.
- Permit scope: plumbing and electrical changes trigger inspection; cosmetic swaps usually don’t.
A written estimate lists tile by area, vanity by model, fixtures by SKU, and labor by phase. It excludes structural surprises found after demo, which we price as a change order you approve in writing before we proceed. Upfront pricing, no surprises: the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Highland Park Homes Specifically Do to This Job
Highland Park (ZIP 75205) is a nearly built-out enclave of century-old homes, so this is almost never new construction. It’s renovation inside a 1910s – 1930s Tudor, Colonial, or Mediterranean house on a small, tree-canopied lot. That changes the work in real ways. Bath walls were framed before modern waterproofing standards, so we open them expecting to add a proper membrane and cement board rather than tile over old drywall. Supply lines are often original galvanized steel, and drains may not line up with a new vanity footprint. Permitting runs through the Town of Highland Park, not Dallas, and design review applies to anything visible or structural, so even a fixture-and-tile job needs approval before demo starts. Narrow streets under the pecan and live oak canopy mean material delivery has to be scheduled and, on some blocks, tree protection coordinated with the town. When this job is part of a bigger scope, our bathroom remodeling service is the umbrella; this page is the finish work inside it. We cover the whole town, and the Highland Park service-area page explains how we schedule there.
Serving Highland Park, TX – Our Local Coverage Area
We serve Highland Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in Highland Park
Most jobs run 2 – 3 weeks of on-site work, plus 2 – 3 weeks of material lead time before demo. A vanity-only swap can finish in a few days. Call (844) 797-4808 for an exact schedule after a site visit.
Cosmetic tile and fixture replacement usually doesn’t require one; moving plumbing, electrical, or structure does, and Highland Park permitting runs through the town rather than Dallas. We handle pulling permits where they’re needed and schedule the inspections. Call (844) 797-4808 and we’ll confirm what your job requires.
Yes, in most cases. If the new vanity footprint fits the existing drain and supply locations, we work in place and skip the rough-in. Relocating a drain or wall is what pushes a job up the price range. We’ll tell you which one you’re looking at in the estimate.
The full package runs $9,000 – $28,000, with a vanity alone at $800 – $3,000 installed. Tile area, material grade, and what’s behind the old wall move the number most. Call (844) 797-4808 for a written line-item quote, free of charge.
Every project carries our 730-Day Done Right Promise: if it’s not right, we make it right. That covers workmanship on tile, vanity setting, and fixture installation. Call (844) 797-4808 for details on your specific scope.
Get a Free Estimate for Vanities, Tile & Fixtures in Highland Park
Call (844) 797-4808 to book a free on-site estimate for vanities, tile & fixtures in Highland Park. We’ll measure, walk your selections, and hand you a written line-item quote with clear inclusions so you can compare apples to apples. Financing is available at 0% for 18 months, plus $1,000 off projects over $10,000. A live person answers the phone around the clock.
Written by the team at Groundwork Construction Co.