Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Highland Park, TX: What the Job Actually Involves
Metal roofing in Highland Park, TX typically runs $15,000 – $40,000 installed, and a full tear-off and re-roof on a 1910s – 1930s home usually takes 4 – 8 working days once the town permit clears. The job is a tear-off of the old shingle or tile field, deck inspection and repair, then panel or standing seam install with new underlayment and flashing. Call (844) 797-4808 for a free on-site estimate.
From Tear-Off to Final Inspection: How a Metal Roof Goes On
Every metal roof we install follows the same sequence. The durations below are typical for a Highland Park home; a complex roofline with dormers and hips pushes toward the long end.
Stage 1: Tear-off and deck inspection (1 – 2 days). We strip the existing roof down to the sheathing and walk the deck board by board. On these older homes the decking is often original 1x lumber with gaps and soft spots, so you’ll get a written count of what needs replacing before we go further. This is also when the town inspector sees the open deck if your permit requires it.
Stage 2: Deck repair and underlayment (half a day to a full day). Bad boards come out, new sheathing goes down, and a high-temp synthetic underlayment is rolled over the whole field. You decide at this point whether to add a peel-and-stick ice-and-water membrane at the valleys and eaves; on a North Texas roof with hail exposure, we recommend it.
Stage 3: Flashing and trim (1 day). Drip edge, valley metal, pipe boots, and chimney or skylight flashing go on before a single panel. This is the step cheap crews skip, and it’s the reason metal roofs leak at the penetrations five years later.
Stage 4: Panel installation (2 – 4 days). Panels are laid, fastened to manufacturer spec, and seamed or screwed down depending on the system you picked. You’ll have already approved the panel profile, color, and fastener type, so this stage is execution, not decision-making.
Stage 5: Final inspection and walkthrough (same day). We clean the site, magnet-sweep the yard and driveway for fasteners, meet the town inspector, and walk the finished roof with you. You get the manufacturer warranty paperwork and our 730-Day Done Right Promise in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Metal Roofing
Metal roofing is not one product. The system you pick drives both price and how the roof performs in Highland Park’s heat and hail. Here’s what homeowners actually weigh.
- Standing seam panels – concealed fasteners, clean vertical lines, the premium choice. Best hail and wind performance and the longest lifespan. Fits the historic detailing on Tudor and Colonial homes without looking industrial.
- Exposed-fastener metal panels (screw-down) – the value option. Lower upfront cost, but the washers on the fasteners age in Texas sun and need periodic attention. Fine for sheds and outbuildings, a harder sell on a century-old main house.
- Stone-coated steel – looks like tile or shake, carries a metal core. A common pick on Mediterranean-style homes where a bare metal field would fight the architecture.
- Color and finish – a premium Kynar 500 finish holds color far better under UV than a standard painted finish. Worth the upgrade on a roof meant to last decades.
- Panel gauge – heavier gauge resists hail dents and oil-canning better than light gauge. The trade-off is cost and weight on the deck.
We’ll bring samples and show you the honest difference in writing, not talk you into the top of the line.
What Metal Roofing Costs in Highland Park, TX
Plan on $15,000 – $40,000 for a full metal roof installation in Highland Park. Where a job lands in that range comes down to five things:
- Roof size and pitch – square footage is the biggest lever. A steep pitch adds labor and safety time.
- Existing roof condition – multiple old layers to strip, or soft decking, adds tear-off and deck-repair cost.
- System choice – standing seam sits at the top of the range; exposed-fastener panels sit lower.
- Complexity – dormers, valleys, skylights, and chimneys mean more flashing and more detail work.
- Permit scope – Highland Park permitting and any structural work the deck requires.
Your written estimate lists tear-off, deck repair allowances, underlayment, flashing, panels, labor, and permit fees line by line. It also states what’s not included, such as structural framing repair if the deck reveals rot. Upfront pricing, no surprises: the number you see is the number you pay, and projects over $10,000 get $1,000 off with 0% financing for 18 months available.
See the difference
Before
After
Before
After
Before
AfterWhat Highland Park Homes Specifically Do to This Job
Highland Park is a nearly built-out enclave of century-old homes, and that changes metal roofing here in ways it doesn’t in newer suburbs. Most of the housing stock dates to the 1910s – 1930s, so we’re routinely matching historic detailing on Tudor, Colonial, and Mediterranean roofs while upgrading a deck that’s been patched for generations. The Town of Highland Park runs its own permitting, design review, and lot-coverage rules rather than Dallas codes, so approvals take planning and the design review board has a say in exterior changes. Mature pecan and live oak canopy over the narrow streets means material deliveries and any crane pick usually need a tree-protection plan and a coordinated street closure with the town. On ZIP 75205 homes, we see old flashing failures and storm-loosened panels after spring hail, and we plan the schedule around North Texas heat that compresses work windows in July and August.
Serving Highland Park, TX – Our Local Coverage Area
We serve Highland Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Metal Roofing in Highland Park
Most Highland Park metal roofing jobs take 4 – 8 working days on the roof, plus permitting time with the town before work starts. Call (844) 797-4808 and we’ll give you a realistic schedule for your home.
Yes. The Town of Highland Park requires a permit for roof replacement, and the town’s own design review applies to exterior changes. We pull the permit and meet the inspector so you don’t have to. Call us to talk through what your project will need.
In most cases yes, but the deck has to be sound and the framing has to carry the added weight. If the tear-off reveals rot or undersized framing, we document it and price the repair before proceeding. Call (844) 797-4808 for an inspection and an exact quote.
Expect $15,000 – $40,000 installed, depending on size, system, and complexity. A written line-item estimate is the only way to know your number, and ours are free. Call (844) 797-4808 to schedule one.
You get the manufacturer’s material warranty plus our 730-Day Done Right Promise on workmanship: if it’s not done right, we make it right. Call for the details in writing before you sign anything.
Get a Free Metal Roofing Estimate in Highland Park
If you’re weighing metal roofing in Highland Park, start with a free on-site estimate. Call (844) 797-4808 and a live person answers, any hour. We’ll inspect the roof, measure it, and hand you a written line-item estimate with the system options and price range for your home. No pressure, no surprises.
Written by the team at Groundwork Construction Co. of Dallas.