Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in Highland Park, TX: What the Job Actually Involves
An iron fence in Highland Park, TX runs $3,500 to $9,000 for most residential lots, and a typical install takes three to seven working days from layout to final coat. That covers removal of the old barrier, new posts set in concrete, and panels hung and finished. Most properties here are working around mature trees, tight side yards, and a town permitting review that shapes the schedule before a single hole gets dug. Call (844) 797-4808 and a real person picks up to talk through your lot.
How We Build an Iron Fence Here, Stage by Stage
An iron fence is a different animal from a wood or vinyl run. The panels are heavy, the posts have to be dead plumb or the gates won’t swing, and every stage has a decision point for you. Here’s the honest sequence.
Stage 1: Site visit and layout (day 1)
We walk the property line with you, check for buried irrigation, gas lines, and old concrete footings from a previous fence, and confirm where the fence meets the house. On a narrow Highland Park lot, this is also where we flag tree roots and any canopy that limits delivery. You decide the run: full perimeter versus front yard and gates only.
Stage 2: Permit and design review (days 1 to 5, runs in parallel)
The Town of Highland Park runs its own permitting and design review rather than Dallas codes, so fence height, placement, and materials get checked against town rules, not city ordinance. You pick the iron style (flat top, spear, arched) and finish (powder-coated black is standard). We handle the submittal.
Stage 3: Demolition and post setting (days 2 to 3)
Old fence comes out, holes get dug to depth, and posts go in set in concrete. Iron posts need to cure before panels go on. If you’re keeping mature pecan or live oak, we protect the root zone and set posts slightly off the line rather than cutting through a root.
Stage 4: Panels, gates, and finish (days 4 to 6)
Panels get hung, gate hardware installed, and every weld and touch-up checked. This is where you confirm gate swing direction and latch type.
Stage 5: Final walkthrough and inspection sign-off (day 7)
We walk the run with you, check plumb and spacing, and hand off the warranty in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Iron Fence Options You’ll Choose Between
Most homeowners get surprised by how many decisions sit inside one fence. Here’s what actually matters, with the honest trade-off on each.
- Wrought iron vs. steel vs. aluminum: True wrought iron is heavy, expensive, and rare now. Steel is the workhorse – strong, paintable, rust-susceptible at welds. Aluminum is lighter and rust-proof but dents easier. For Highland Park front yards, most go steel with powder coat.
- Finish: Powder-coated is durable and low-maintenance. Bare or hand-painted steel looks right on a 1920s Tudor but needs recoating every few years.
- Panel style: Flat top, spear top, arched, or ornamental. Spear top reads traditional; arched suits a Colonial entry.
- Post and anchor method: Set in concrete (strongest) versus surface-mounted to existing concrete. Surface-mount saves demo but is only as good as the slab.
- Gates: Walk gate, drive gate, or both. Drive gates in iron get heavy fast and need proper hinges and a post footing that can carry the load.
What an Iron Fence Costs in Highland Park, TX
The lead range for this page is $3,500 to $9,000. Where you land depends on a handful of real variables, not vague “pricing varies” language.
| Line item | Typical range |
|---|---|
| Front yard iron fence (roughly 80 – 120 linear ft) | $3,500 – $6,000 |
| Full perimeter iron fence (larger lot) | $6,000 – $9,000 |
| Drive gate, iron, hung and hardware | Add $1,200 – $2,500 |
| Demolition and haul-off of old fence | Add $400 – $900 |
What pushes a job to the high end: extra linear footage, arched or ornamental panels, drive gates, and root-zone work where posts have to be set off the line. What keeps it low: a short front run, a clean removal, and standard flat-top steel.
Your written estimate lists footage, panel style, finish, gate count, demo, and permit. It doesn’t include landscaping repair beyond reseeding disturbed turf, or moving irrigation heads outside the fence line.
See the difference
Before
After
Before
After
Before
AfterWhat Highland Park Homes Specifically Do to This Iron Fence Job
Highland Park is a nearly fully built-out enclave of century-old homes, and construction here almost always means renovation or rebuild under strict town oversight rather than greenfield work. That shapes an iron fence more than you’d think. The Town of Highland Park runs its own permitting and design review, so fence height, placement, and materials are checked against town rules, not Dallas codes. Expect a design review before demolition. Lots are tight and tree-canopied, so a delivery truck may need a coordinated approach on narrow streets where mature pecan and live oak stand close to the curb. Housing stock is dominated by 1910s – 1930s Tudor, Colonial, and Mediterranean homes, and ironwork has to match that historic detailing rather than fight it. The expansive clay soils also matter: a post set shallow will heave and tilt within a season or two, so depth is not something to cut corners on.
Serving Highland Park, TX – Our Local Coverage Area
We serve Highland Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Iron Fence in Highland Park
Most jobs run three to seven working days, with the town’s design review adding a few days before demolition starts. Call (844) 797-4808 for a schedule based on your lot.
Yes. The Town of Highland Park requires permitting and design review for fence work, and we handle the submittal so it’s done right the first time. Call (844) 797-4808 to get started.
In most cases yes – we work around root zones and existing plantings, setting posts off the line where a tree is in the way. Call (844) 797-4808 for a site assessment.
Most jobs land between $3,500 and $9,000, with larger lots and drive gates pushing toward the top. Call (844) 797-4808 for an exact written quote – estimates are free.
Every iron fence project is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Call (844) 797-4808 to talk through the details.
Homeowners often pair an iron fence with Patios, Walkways & Pool Decks in Highland Park to tie the exterior together, or with ADU Design & Permitting in Highland Park when a rear addition is on the table. As part of a full Fence Installation in Highland Park, our Fence Installation service covers the wider project scope, with work across Highland Park and nearby areas including University Park, Dallas, Farmers Branch, and Irving.
Get a Free Estimate for Your Iron Fence
If you’re ready to price an iron fence in Highland Park, call (844) 797-4808. A live person answers 24/7, and we’ll set a free on-site estimate where we walk the lot, confirm footage and gate placement, and hand you a written line-item quote. No pressure, no vague bids, no change orders once work starts. The number we quote is the number you pay.
Written by the team at Groundwork Construction Co.