Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in University Park, TX: Cost, Timeline, and What’s Involved
A tub-to-shower conversion in University Park typically runs $3,500 – $10,000 and takes 3 to 7 working days once materials are on site. The job means pulling the tub and its surround, reworking the drain and valve rough-in, waterproofing the wet wall, and setting a new shower pan and tile so the finished floor actually drains. Most conversions in 75225 land in the middle of that range because to-the-stud tearout, cast-iron drain changes, and custom tile add labor. Call (844) 797-4808 for a free on-site estimate before you commit to a number.
How the Work Actually Unfolds, Stage by Stage
Conversion work has a rhythm. Here’s what each stage looks like and what you’ll be deciding while it’s happening.
Stage 1: Layout and demo (day 1)
We measure the alcove, confirm the tub’s footprint, and map where the new pan will sit. Then the tub, surround, and valve trim come out. This takes part of one day. You’ll pick the shower footprint here: a 60-inch standard alcove, a shorter 48-inch pan, or a curbless layout. Curbless costs more because the floor structure and slope have to be built carefully, but it’s easier to step into and reads cleaner in a tight bathroom.
Stage 2: Rough-in and inspection (days 2 – 3)
Drain relocation and valve work happen now. If the existing tub drain is cast iron, we cut and adapt it to PVC. If you’re moving the valve, that’s copper or PEX rework. The inspector looks at rough-in before anything closes up. You decide at this point whether to add a bench, a niche, or a handheld Moen or Delta shower system, because adding them later means reopening the wall.
Stage 3: Waterproofing (day 3 – 4)
This is the step that separates a shower that lasts from one that leaks into the room below. We install a bonded waterproof membrane over cement board or a foam pan system, seal the seams and corners, and flood-test where required. Your choice here is tile-ready versus a pre-formed waterproof pan. The foam system is faster and carries factory warranties; a built pan gives you more shape flexibility. Both work when done right.
Stage 4: Tile and fixtures (days 4 – 6)
Wall tile, floor tile, grout, then setting the drain, showerhead, and any glass. Grout and caulk need curing time, so this stage isn’t rushed. You’ll confirm tile layout and accent placement before we start setting. Realistic selections matter here: a large-format porcelain installs faster and shows fewer grout lines, while a mosaic floor gives better grip underfoot.
Stage 5: Finishing and walkthrough (day 7)
Final caulk, a wet test of the drain slope, and a walkthrough with you. We check that water runs to the drain and no pooling sits on the pan. If you’re pairing the bathroom with other work, the wider scope of our Bathroom Remodeling in University Park service covers that planning. Permits get inspected and passed before we call it done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make Between (and What Each Costs You)
Most of the spread between a $3,500 conversion and a $10,000 one comes down to these decisions. Here’s the honest trade-off on each.
- Shower pan type. A pre-formed acrylic or fiberglass pan is the cheapest and fastest, runs the low end of the range, and cleans easily. A tiled pan looks better and lasts longer but adds several hundred dollars in labor and waterproofing. A curbless pan is the priciest because of the structural work.
- Wall surround. Acrylic surround panels are quick to install and forgiving on older uneven walls. Porcelain or ceramic tile gives a custom look and holds up better to decades of use, at a higher material and labor cost.
- Valve and trim. A standard pressure-balance valve keeps the temperature steady. A thermostatic valve costs more but holds an exact temperature, which matters in homes with multiple fixtures running at once. Delta and Moen both make reliable trim sets that last.
- Drain configuration. A center drain is the standard and cheapest. A linear drain lets you set large tile with a single slope and looks sleeker, but the hardware and install add cost.
- Glass enclosure. A framed slider costs the least. A frameless glass panel or door is the premium option and needs the shower walls to be perfectly plumb. We confirm that before ordering glass.
- Accessibility extras. Grab bars, a bench, and a handheld shower add value in University Park homes where an aging parent or a multi-generational household is part of the plan. American Standard and Moen make accessible trim lines that don’t look institutional.
On materials, we bring a curated list of trusted brand partners so you’re choosing quality, not just whatever’s in stock. That’s baked into the pricing you see.
What a Tub-to-Shower Conversion Costs in University Park, TX
Budget $3,500 – $10,000 for a tub-to-shower conversion in University Park. That figure covers demo, rough-in, waterproofing, tile or surround, a new shower pan, fixture install, and inspection-ready work. A straight swap with an acrylic pan and standard surround sits near $3,500 – $5,500. A tiled walk-in with a bench, niche, and frameless glass pushes toward $8,000 – $10,000.
Five things move the number:
- Size and alcove condition. A standard 60-inch alcove keeps costs low. Enlarging the footprint or a non-standard opening adds framing and materials.
- Existing plumbing and structure. Cast-iron drains, off-center valves, or a floor that needs re-leveling add labor. Original homes in University Park often carry these surprises behind the wall.
- Moving plumbing or adding a bench or niche. Any change that reopens the rough-in work adds time and money.
- Material grade. Porcelain tile, a thermostatic valve, and a linear drain each add cost over the standard acrylic-and-center-drain setup.
- Permit scope. A permit when plumbing or electrical changes are involved adds a fee and an inspection step, but it’s not optional and it protects you.
Your written estimate is line-item: demo, rough-in, waterproofing, tile, fixtures, and permit. What’s usually not included: structural repairs found after demo, out-of-scope plumbing elsewhere in the house, and haul-away of an old tub if you’re keeping it for resale. We flag anything unexpected before we touch it, and our no-hassle pricing means the number we quote is the number you pay for the scope we agreed on. Every project carries the 730-Day Done Right Promise. For projects over $10,000, we offer $1,000 off, and 0% financing for 18 months is available.
See the difference
Before
After
Before
After
Before
AfterHow University Park’s Housing Stock Changes This Job
Most tub-to-shower work in University Park lands in the 1920s – 1950s brick and frame homes that still make up a big share of the stock in 75225, or in the smaller bathrooms of a pop-and-add. Those older houses carry pier-and-beam or early slab foundations, and those two foundation types change how we build the shower pan. On a pier-and-beam, the slope and deflection of the floor under the pan need extra framing; a slab bathroom may need a slab cut if the drain moves. Original cast-iron drains frequently appear when the tub comes out, and knob-and-tube-era wiring in a bath wall gets corrected while it’s open rather than patched over.
The street-level reality matters too. University Park is landlocked and built out, so tight lots and mature oak canopies squeeze access on many blocks. On a bathroom conversion that means keeping demo debris staged for a small dumpster and protecting the tree canopy from equipment during delivery. The local permitting office treats two-story additions and rebuilds as routine, which means inspections are scheduled and checked with real rigor. If you’re adding a second bathroom as part of a larger addition, the structural and framing questions overlap, so reach out to our University Park crew and we’ll scope it correctly. Homeowners reworking an upper floor sometimes pair this with new Metal Roofing in University Park or Tile Roofing in University Park while access and staging are already set up.
Serving University Park, TX – Our Local Coverage Area
We serve University Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tub-to-Shower Conversion in University Park
Most tub-to-shower conversions take 3 to 7 working days once materials are on site. A simple acrylic-pan swap can be done in 3 days; a fully tiled walk-in with a bench and frameless glass typically lands at 6 or 7. The clock includes demo, rough-in, waterproofing cure time, tile, and inspection. Call (844) 797-4808 for a schedule you can plan around.
Yes, a permit is required any time plumbing or electrical is altered during a tub-to-shower conversion in University Park. If you’re keeping the existing drain and valve in place, the scope can sometimes avoid a permit, but moving the drain or valve requires one. We pull permits and pass inspections. Call (844) 797-4808 and we’ll tell you which category your job falls into.
Often yes. If the existing drain and valve are centered under the tub and sound, a tub-to-shower conversion can keep the rough-in where it is and simply build a new pan and surround around it. That’s the lowest-cost path, near the $3,500 – $5,500 mark. Moving the drain to a linear or off-center position adds cost and permit scope. Call (844) 797-4808 for an on-site look before you assume the worst.
A tub-to-shower conversion in University Park runs $3,500 – $10,000 depending on pan type, tile, fixture grade, and whether plumbing moves. A standard acrylic swap sits near the bottom of that range; a tiled, glassed-in walk-in with a thermostatic valve sits near the top. Estimates are free and line-item, so the number you see is the number you pay for the scope. Call (844) 797-4808 for your exact quote.
Every tub-to-shower conversion we do is backed by the 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it covers the pan, waterproofing, tile, and fixture install we perform. Manufacturer warranties on Delta, Moen, and shower systems ride on top of that. Call (844) 797-4808 with any warranty question.
Get a Free Tub-to-Shower Conversion Estimate in University Park
Ready to price your conversion? Call (844) 797-4808 and a live person answers, 24/7, no voicemail. We’ll ask about your current tub, your bathroom layout, and what you want the shower to feel like, then schedule a free on-site estimate with a line-item written quote. Technicians arrive background-checked and in uniform. No pressure, no surprise numbers.
Written by the team at Groundwork Construction Co.