Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Farmers Branch, TX: What It Takes and What It Costs
Door installation in Farmers Branch typically runs $450 to $2,800 per door, with most single exterior or interior doors finished in one day and larger multi-door or structural openings taking two to three. The number swings on door type, whether the rough opening has to change, and how much trim and finish work you want matched. Call (844) 797-4808 for a free on-site estimate. We answer live, 24/7, and we put the price in writing before anyone touches a hinge.
How We Install a Door, Start to Finish
Door installation isn’t a hang-and-go job, especially on the older Farmers Branch housing stock where a “standard” opening is rarely standard. Here’s the real sequence we run, and what you decide at each stage.
Stage 1: Measure and site check (day 1, about 45 minutes)
We measure the rough opening in three places – top, middle, bottom – because walls settle and the Blackland Prairie clay under Farmers Branch moves. We check the header, the framing, and whether the existing threshold is level. You decide the door swing direction and confirm which side the hardware goes on. This is also when we flag if the opening needs reframing, which changes the scope and the quote.
Stage 2: Door and material selection lock-in (day 1 to day 3)
You pick the slab or prehung unit, the material, the finish, and the hardware. Prehung units arrive in 3 to 7 business days for stock sizes; custom or oversized doors run 2 to 4 weeks. We confirm the exact unit, the trim profile, and the color before ordering, so nothing shows up wrong. This is the decision point that most affects your timeline.
Stage 3: Demo and prep (day of install, 1 to 2 hours)
We pull the old door and frame, inspect for rot, water damage, or pest issues behind the trim, and repair any soft framing before the new unit goes in. A door that gets hung over a rotten sill leaks within a season. On exterior doors we check the flashing and the threshold seal at this stage, since North Texas wind-driven rain finds every gap.
Stage 4: Setting, shimming, and sealing (2 to 4 hours)
The new unit gets set plumb and level, shimmed at the hinge and strike points, and secured with the right fasteners for the wall type. Exterior doors get flashed, sealed, and insulated at the frame. Interior doors get hung true so they latch clean without a fight. We check operation three or four times before we call it set.
Stage 5: Trim, hardware, and walkthrough (1 to 2 hours)
Casing and trim go on to match your existing profile, hardware gets installed and adjusted, and we walk the door with you – swing, latch, seal, finish. You sign off, and the work is covered by our 730-Day Done Right Promise. If something’s off in month eight, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Your Door
Door installation choices break into material, configuration, and hardware. Each has a real trade-off, and picking wrong costs you on the back end.
- Fiberglass exterior doors: The most common pick for Farmers Branch exteriors. Holds up to heat and hail better than wood, doesn’t swell or warp, and takes a stain or paint finish that looks like wood. Runs $600 to $1,800 installed. Suits the mid-century ranch stock that dominates here.
- Steel exterior doors: The budget and security option. Strong, energy-efficient, and inexpensive at $450 to $1,200 installed. Downsides: it dents, and it can rust at the bottom edge if the threshold seal fails. Good for side and back doors.
- Wood exterior doors: The premium look. Real wood runs $1,200 to $2,800 installed and needs refinishing every few years in the Texas sun. Beautiful on a front entry, less forgiving everywhere else.
- Interior hollow-core doors: The standard for bedrooms and closets. Light, cheap at $250 to $600 installed, and fine for most rooms. They don’t deaden sound well.
- Interior solid-core doors: Heavier, quieter, and better for bathrooms and home offices. Runs $450 to $900 installed. Worth it where privacy or noise matters.
- Prehung vs. slab: Prehung units come with the frame and are faster to install. Slabs reuse the existing frame and cost less but demand a perfectly square opening – rare on older homes.
What Door Installation Costs in Farmers Branch, TX
Door installation in Farmers Branch runs $450 to $2,800 per door installed, and a whole-home swap of six to eight interior doors lands between $2,400 and $5,500. Those numbers include the door, labor, trim, and hardware unless we note otherwise. Here’s the line-item view:
| Item | Typical Range |
|---|---|
| Interior hollow-core door, installed | $250 – $600 |
| Interior solid-core door, installed | $450 – $900 |
| Steel exterior door, installed | $450 – $1,200 |
| Fiberglass exterior door, installed | $600 – $1,800 |
| Wood exterior door, installed | $1,200 – $2,800 |
| Reframing a non-standard opening | $300 – $900 |
| Trim and casing, per door | $80 – $250 |
Five things push a job to the high end: door material grade, whether the rough opening has to be reframed, existing rot or water damage behind the frame, matching custom trim on older homes, and exterior door permit scope if the opening changes. On a straightforward interior swap, you’re at the low end. On a front entry with a new opening and custom trim, you’re at the top.
A written estimate from us covers the door unit, labor, standard hardware, trim to match, haul-away of the old door, and sealant. It doesn’t cover premium hardware, custom glass inserts, painting or staining beyond a basic finish, or structural repair if we find something behind the wall once demo starts. We tell you before we start, not after.
See the difference
Before
After
Before
After
Before
AfterWhat Farmers Branch Homes Specifically Do to This Job
Farmers Branch is a small, fully built-out inner-ring Dallas suburb in ZIP 75234 – almost no new residential land exists, so door work here is renovation and replacement on existing homes, not new construction. The core stock is mid-century ranch homes and small post-war cottages built roughly 1950s to 1970s, and much of that near the southern edge blends into Dallas’s Brook Hollow and Marsh Lane area. Those homes have been through 50 to 70 years of settlement, and the Blackland Prairie clay under Farmers Branch swells and shrinks hard between droughts and wet springs. What that means for a door: the rough openings have moved. A “standard” 32-inch door rarely drops into a 1962 frame without shimming, reframing, or squaring the opening first.
The city enforces codes and permits aggressively on older properties, so exterior door replacements that change the opening size or affect the structural header need a permit and an inspection. We pull it and pass it. And the heat and spring hail here punish exterior doors that aren’t flashed and sealed right – we see failed thresholds and rotted sills on homes along the Valley View corridor because the original install skipped the flashing step. If your door replacement is part of a bigger exterior refresh, look at our Windows & Doors in Farmers Branch work, and homeowners often pair a new entry door with a Chain Link Fence in Farmers Branch or a Vinyl Fence in Farmers Branch to finish the yard edge at the same time. You can see the full scope of our Windows & Doors service, and check the Farmers Branch service-area page for what we cover here.
Serving Farmers Branch, TX – Our Local Coverage Area
We serve Farmers Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Door Installation in Farmers Branch
A single interior or exterior door is installed in one day, typically 3 to 6 hours. A whole-home swap of six to eight interior doors runs one to two days. Custom or oversized doors add 2 to 4 weeks for the unit to arrive before install day. Call (844) 797-4808 to schedule your free estimate and get a firm timeline.
A straight like-for-like swap usually doesn’t require a permit, but changing the opening size or altering the structural header does, and Farmers Branch enforces this on older properties. We tell you upfront which side of that line your job falls on, and we pull the permit and pass the inspection when it’s needed. Call for a free estimate and we’ll confirm the permit scope for your door.
Yes, in most cases. A like-for-like swap doesn’t touch plumbing or structure. The exception is a non-standard opening that has to be reframed, or hidden rot behind the frame that requires structural repair once demo starts. We inspect before we quote so you’re not surprised mid-job.
Most Farmers Branch door installations run $450 to $2,800 per door installed, depending on material and whether the opening needs work. Interior hollow-core doors sit at the low end; a wood front entry with reframing and custom trim sits at the top. Call (844) 797-4808 for an exact quote – estimates are free.
Every door we install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right, for two full years. That’s one of the longest workmanship guarantees in residential construction. The door unit itself also carries the manufacturer’s warranty, which we hand you in writing.
Get a Free Door Installation Estimate in Farmers Branch
If you’re planning door installation in Farmers Branch, call (844) 797-4808 for a free on-site estimate. We’ll measure the openings, walk the options with you, and hand you a written line-item quote with upfront pricing – the number you see is the number you pay. A live person answers, 24/7. No voicemail, no waiting until Monday. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off.
Written by the team at Groundwork Construction Co.