Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Farmers Branch, TX: What the Job Actually Involves
An aluminum fence in Farmers Branch typically runs $4,000 – $10,000 for most residential lots, and a standard run is planned, permitted where required, and built in about 3 to 7 working days. The material holds up to North Texas hail and straight-line wind better than wood or vinyl, which is why it’s the fence most often specified on the rebuilt and remodeled lots along the Valley View corridor. Call (844) 797-4808 for a free on-site estimate.
How We Build an Aluminum Fence Here, Step by Step
Aluminum fencing has a specific order of operations. Rushing any stage is what causes the leaning panels and popped posts you see on older Farmers Branch properties, so we don’t skip them.
- 1
Stage 1 – Site walk and layout (day 1). We mark the property line, confirm the utility locate, and shoot elevations. On the clay-heavy lots common in Farmers Branch, we check for grade fall and any old concrete footings from a previous fence. You decide the fence line and gate positions at this stage.
- 2
Stage 2 – Demo and prep (days 1 – 2). Old wood or chain link comes out, posts and concrete included. We haul it off. If the ground is uneven after removal, we regrade the fence line before anything goes in.
- 3
Stage 3 – Footings and posts (days 2 – 3). We set posts in concrete at code depth, plumb and braced. On expansive clay soil, footing depth and concrete mix matter more than they do on sandy ground. Posts cure before rails go on.
- 4
Stage 4 – Panels, rails, and gates (days 3 – 5). Rails and pickets go up panel by panel, then gates are hung and adjusted for swing and latch. This is when you confirm gate hardware and any decorative finials or post caps.
- 5
Stage 5 – Final walkthrough (days 5 – 7). We check every post for plumb, every gate for alignment, and touch up any finish nicks. You sign off, and the work is covered under our 730-Day Done Right Promise.
The full sequence usually takes 3 to 7 days depending on linear footage and gate count. Larger runs with multiple gates and corners push toward the longer end.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Aluminum Fence Options You’ll Choose Between
Aluminum isn’t one product. The choices you make here determine both the price and how the fence looks in 15 years.
- Residential-grade vs. heavy commercial-grade. Standard residential panels suit most backyards. Commercial-grade has thicker walls and heavier posts, suited to street-facing runs or properties near the I-35E commercial corridor. It costs more but resists impact better.
- Picket spacing. Standard 4-inch spacing keeps small pets in. Tighter spacing or a puppy-picket bottom section adds cost but solves the gap problem on properties with dogs.
- Height and style. 4-foot, 5-foot, and 6-foot runs are the common choices. Ornamental styles with arched tops or decorative sections look sharper and cost more per foot than plain flat-top panels.
- Finish and color. Powder-coated black is the default. Bronze, white, and custom colors are available but add lead time and cost. Powder coat holds up to Texas sun far better than painted steel or vinyl, which chalks and cracks.
- Gate configuration. Walk gates, double-drive gates, and self-closing hardware all change the number. Pool-code self-latching gates cost extra but are required around pools.
What Aluminum Fence Costs in Farmers Branch, TX
Most aluminum fence jobs in Farmers Branch land between $4,000 and $10,000. The range reflects real differences in scope, not a spread meant to confuse.
What pushes a job toward the high end:
- Linear footage. Longer runs cost more, though the per-foot price drops as footage climbs.
- Old fence removal. Tearing out and hauling an existing wood or chain link fence adds demo and disposal cost.
- Grade and soil conditions. Sloped lots and the expansive clay under most Farmers Branch yards can require deeper footings or stepped panels, both of which add labor.
- Gate count and style. Each gate adds hardware, framing, and installation time. Double gates and pool-code gates are the priciest.
- Material grade and finish. Commercial-grade panels and custom powder-coat colors add cost over standard residential black.
A written estimate from us breaks out footage, material grade, gate count, demo, and any footing work. What’s not always included: utility locate fees if a private line needs marking, and HOA submittal paperwork if your community requires it. We flag both before work starts. Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Farmers Branch Homes Specifically Change About This Job
Farmers Branch is a small, fully built-out inner-ring suburb (ZIP 75234). There’s almost no new residential land, so fence work here is nearly always replacement or upgrading on existing lots, not new subdivision installs. Much of the housing stock near the Dallas line and the Brook Hollow/Marsh Lane edge is mid-century ranch and small post-war cottages from the 1950s through the 1970s. Those properties often have original or second-generation wood fences that are at end of life, which is exactly when homeowners switch to aluminum.
Two local factors shape the build. First, the Blackland Prairie clay under Farmers Branch swells and shrinks hard between droughts and wet springs, so post footings need real depth and proper concrete, not just a bag of quick-set in a shallow hole. Second, the city enforces codes carefully on older properties, so fence height, property-line placement, and pool safety rules are checked. Around pools, self-closing and self-latching gate hardware is required, and we build to that spec. Hail and straight-line wind are real seasonal threats here, and aluminum handles both better than wood. If you’re part of a full Fence Installation in Farmers Branch project, we scope the aluminum section alongside gates and privacy screening. Homeowners often pair this with Driveway Repair & Replacement in Farmers Branch or Patios, Walkways & Pool Decks in Farmers Branch when the backyard is getting a full reset.
Our fence installation service covers the wider community through our Fence Installation page, and you can see the full range of what we do in Farmers Branch and neighboring Addison, Carrollton, Irving, and Coppell.
Serving Farmers Branch, TX – Our Local Coverage Area
We serve Farmers Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Aluminum Fence in Farmers Branch
A typical aluminum fence in Farmers Branch takes 3 to 7 working days from demo to final walkthrough. Larger runs with multiple gates and stepped panels sit at the longer end. Call (844) 797-4808 for a firm timeline on your property.
Farmers Branch generally requires a permit for fences over a certain height or near property lines, and pool-area fencing has its own safety rules. We confirm what your specific lot requires before any work begins. Call (844) 797-4808 to get that question settled before you commit.
Aluminum handles hail and straight-line wind better than wood, which splits, or vinyl, which cracks. Powder-coated aluminum panels flex under impact rather than shattering. Heavier commercial-grade panels add more resistance on exposed runs.
Yes, in most cases. We dig post holes only where posts go and avoid trenching. If landscaping sits directly on the fence line, we work around it or discuss moving it first. The call is yours before we break ground.
Most aluminum fence installations in Farmers Branch run $4,000 – $10,000. All work is covered under our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. Call (844) 797-4808 for an exact quote on your lot, free.
Get a Free Aluminum Fence Estimate in Farmers Branch
We’ll walk the property, measure the line, check footing conditions in that clay soil, and hand you a line-item written estimate covering footage, grade, gates, and demo. No pressure, no sales theater. Call (844) 797-4808 to schedule your free estimate. Live person, around the clock.
Written by the team at Groundwork Construction Co.