Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Farmers Branch, TX: What the Job Actually Takes
Cabinets & countertops in Farmers Branch, TX typically run $14,000 – $45,000 for a full kitchen replacement, and most projects are finished in three to five weeks from demo to final caulk. A straight cabinet swap with new tops lands closer to $6,000 – $19,500; a layout change with moved plumbing pushes toward the top of the range. Call (844) 797-4808 and we’ll put a real number on your kitchen, not a range and a shrug.
How We Run a Cabinet and Countertop Job, Start to Finish
Every kitchen we take on in Farmers Branch follows the same five stages. Here’s what happens and when, so you know exactly what you’re paying for.
Stage 1: Measure and design (week 1)
We laser-measure the room, check wall plumb and floor level, and map where the existing boxes and tops sit against the new plan. This is where you decide door style, finish, and whether the sink and range stay put. Two to four days, and you get a written line-item quote before anything gets ordered.
Stage 2: Order and lead time (weeks 2 – 4)
Stock cabinets from a major line can land in 7 to 10 days. Semi-custom runs four to six weeks. Countertop slabs get selected and templated after the boxes are set, not before, because a template taken too early is a template taken wrong. We lock your order date in writing so nobody’s guessing.
Stage 3: Demo and prep (days 1 – 2)
Old boxes and tops come out, and we shut off water and gas at the source before anything moves. Drywall gets patched, and we check the wall behind the old cabinets for water damage or loose tile. If we find rot or a bad shutoff valve, you hear about it that morning, with a price, before we touch it.
Stage 4: Cabinet set and countertop template (days 3 – 8)
New cabinets get shimmed, leveled, and screwed to studs. Then the countertop fabricator comes out to template the actual installed boxes. This template step is why cabinets go in first. Your slab gets cut and polished in the shop, typically a 5 to 10 day turnaround for quartz or granite.
Stage 5: Tops, sink, and final walkthrough (days 9 – 14)
The countertop goes down, the undermount sink gets set with a Moen or Delta faucet of your choosing, and we reconnect water and gas and test every connection. Then we walk the kitchen with you, check door alignment, drawer glide, and caulk lines, and hand over the 730-Day Done Right Promise in writing. If a hinge sags in month eight, we come back and fix it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Move Your Kitchen
Most of the decisions happen in week one, and they’re the ones that decide whether you land at $14,000 or $45,000. Here’s what you’re choosing between.
- Cabinet construction: Stock boxes (particleboard with a plywood option) run less and install faster. Plywood-box semi-custom is sturdier around the hinges and holds up better in a hot Dallas-area kitchen. Full custom is built to the inch and priced like it.
- Door style and finish: Painted MDF shaker is the most common pick and the easiest to touch up. Thermofoil resists moisture but can peel at the edges over time. Real wood veneer looks best up close and costs the most.
- Countertop material: Quartz is non-porous, needs no sealing, and handles the heat. Granite is natural stone, needs resealing every year or two, and every slab is one of a kind. Laminate is the budget pick and has come a long way, but it can’t take a hot pan.
- Edge profile and thickness: A standard eased edge is included in most quotes. A thick mitered edge or a waterfall side adds real cost per linear foot, and it’s the detail most people notice first.
- Sink and faucet: An undermount sink with a single-handle pull-down faucet from Delta or Moen is the workhorse setup. Farmhouse sinks need a cabinet made for them. A Blanco composite sink handles heat and stains without the chipping risk of enamel.
What Cabinets & Countertops Cost in Farmers Branch, TX
A full cabinet and countertop replacement in Farmers Branch runs $14,000 – $45,000. Cabinet installation alone is $4,000 – $13,000, countertop installation runs $2,000 – $6,500, and a kitchen island adds $3,000 – $10,000 if you’re adding one. Here’s what pushes a job up or down:
- Linear feet of cabinetry: A 10-foot galley is a different budget than a 24-foot L with an island. This is the single biggest driver.
- Material grade: Stock boxes with laminate tops sit at the low end. Semi-custom with quartz and a farmhouse sink sits at the high end.
- Layout changes: Moving a sink, range, or dishwasher means plumbing and electrical work, and that’s where quotes climb fast. Keeping the footprint saves thousands.
- Existing condition: Old galley kitchens from the 1960s and 70s often hide out-of-square walls, worn shutoffs, and sometimes asbestos-backed vinyl flooring under the old cabinets. That’s a discovery cost, not a design cost.
- Permit scope: A straight swap may not need one. Relocating a gas line or adding a circuit does.
A written estimate from us lists cabinets, tops, labor, demo, haul-away, and any plumbing or electrical allowances as separate lines. It does not include slab upgrades beyond what you selected, appliance replacement, or structural changes found behind the wall. We quote those the day we find them, in writing, before we proceed.
See the difference
Before
After
Before
After
Before
AfterWhat Farmers Branch Kitchens Specifically Throw at This Job
Farmers Branch is a fully built-out inner-ring suburb in ZIP 75234, and almost no new residential land exists here. That means kitchen work in this city is renovation of existing houses, not new build. Much of the housing stock is mid-century ranch and small post-war cottages from the 1950s through the 1970s, and those kitchens were built small, with one wall of cabinets and a peninsula where nobody planned for a dishwasher. When we open up a kitchen near the southern edge, where the housing blends into Dallas’s Brook Hollow and Marsh Lane area, we regularly find galvanized supply lines, undersized electrical, and walls that are half an inch out of plumb. The city enforces permits and inspections tightly on older properties, so any gas or electrical relocation goes through inspection before the tops go on, and we plan the schedule around that. Blackland Prairie clay underneath the slab is the other factor. It swells and shrinks with the seasons, and a kitchen floor that looks fine today may not be level in ten years, which is why we shim and check before setting cabinets rather than trusting the old floor line.
Serving Farmers Branch, TX – Our Local Coverage Area
We serve Farmers Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Farmers Branch
Most jobs run three to five weeks from demo to final walkthrough, and the timeline is usually driven by cabinet lead time and countertop fabrication, not labor. Semi-custom cabinets can add two to three weeks to that window. Call (844) 797-4808 with your room dimensions and we can give you a tighter estimate.
A straight cabinet and countertop swap typically doesn’t require a permit, but relocating a gas line, moving plumbing, or adding electrical circuits does. The City of Farmers Branch enforces permits and inspections on older properties, so we pull what’s required and schedule the inspection before the countertops go down. Call (844) 797-4808 to walk through your specific scope.
Yes, and it’s the most common way we do it. Keeping the sink and range in their current locations keeps the price at the low end of the $14,000 – $45,000 range because there’s no plumbing or gas relocation. We build the new boxes around the existing rough-ins. Call (844) 797-4808 for a free estimate on a keep-the-layout kitchen.
Plan on $14,000 – $45,000 for a full replacement, with cabinet installation at $4,000 – $13,000, countertop installation at $2,000 – $6,500, and islands at $3,000 – $10,000 if you’re adding one. Stock cabinets with laminate sit at the bottom; semi-custom with quartz sit at the top. Call (844) 797-4808 for an exact quote, and we’ll put it in writing.
Every cabinet and countertop job we complete is covered by the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If a door sags, a seam fails, or a drawer glide gives out within that window, we make it right. The material brands carry their own manufacturer warranties on top of ours. Call (844) 797-4808 to talk through the details.
Get a Real Number on Your Farmers Branch Kitchen
We’ll come out, measure the room, look at what’s behind the old cabinets, and hand you a written line-item estimate with no change orders sneaking in later. On the call you’ll talk to a live person who can answer scope and scheduling questions, and we can set the on-site visit around your week. New cabinets and countertops are often the first piece of a bigger plan, so if you’re thinking past the kitchen, it’s part of a full Kitchen Remodeling in Farmers Branch and we can scope it that way. For the wider service itself, see our Kitchen Remodeling page. Homeowners often pair this with Walk-In Showers & Shower Remodeling in Farmers Branch or a Tub-to-Shower Conversion in Farmers Branch when a whole-floor update makes sense. You can see everywhere we cover on our Farmers Branch page.
Call (844) 797-4808 to schedule your free estimate. We answer around the clock, and we’ll bring the pricing sheet with us.
Written by the team at Groundwork Construction Co.