A Groundwork company - serving Dallas, TX
Kitchen Design & Layout in Irving, TX | Groundwork Construction Co. of Dallas

Kitchen Design & Layout in Irving - Fixed Price, Set Finish Date

Free in-home design consult and a written, line-item quote before demo starts. The price we sign is the price you pay, with a finish date in the contract. Licensed, insured, permits handled.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Kitchen Design & Layout in Irving, TX: What It Takes and What It Costs

Kitchen Design & Layout in Irving runs $14,000 – $45,000 depending on kitchen size, whether plumbing and electrical move, and material grade, with design and planning typically taking 2 – 4 weeks before a single cabinet leaves the box. The work is about getting the triangle right (sink, range, fridge) before demo starts, because layout changes made after cabinets are ordered are the single most expensive correction on any kitchen. Call (844) 797-4808 to schedule your free on-site estimate and design consult.

Call (844) 797-4808

How We Plan a Kitchen Layout, Stage by Stage

Design work here isn’t a mood board. It’s a sequence of decisions with deadlines attached, and each one locks in a cost you can’t easily undo later. Here’s the real order.

1. Site measure and existing-conditions walk (day 1, 2 – 3 hours)

We measure every wall, check whether the kitchen sits over a slab or a framed floor, and document where the gas line, water shutoffs, drain stack and 220V range circuit actually run. On Irving’s older stock this step often turns up surprises: a wall that reads as plumbing-free on the visible side but hides a chase inside. Nothing gets specified until this is done, because a layout built on assumed dimensions is a layout you’ll pay to redo.

2. Layout options and the design consult (days 3 – 10)

You’ll see two or three working layouts, each with real dimensions and clearances rather than a pretty rendering. This is where you decide the big three: galley, L-shape or island; work aisle width (42 inches is comfortable, 36 is tight but workable in a small Irving ranch kitchen); and whether the sink stays under the window. Your decisions here govern the cabinet order, so we don’t move forward until you’ve signed off on the plan.

3. Selections and a written line-item quote (days 10 – 21)

Cabinets, counters, backsplash, hardware and appliance sizes all get picked in this window. KraftMaid and Cambria are the two we specify most, though a curated set of other partners covers the rest. A 24-inch range versus a 30-inch, or a counter-depth fridge versus standard, changes the cabinet run by inches, and those inches come out of your quote. You get the full number in writing with the fixed price locked, so the figure doesn’t wander once work starts.

4. Permits, demo and rough-in (days 21 – 28)

If the layout moves plumbing, electrical or a wall, the City of Irving needs a permit, and we pull it and see the inspection through. Demo takes 2 – 4 days on a typical kitchen. Rough-in (new drain runs, relocated outlets, any header work) takes 3 – 5 days and has to pass inspection before drywall goes back up, which is a hard stop, not a formality.

5. Installation and final walkthrough (days 28 – 45)

Cabinets set first, then counters templated and installed (a week of lead time for stone), then tile, then fixtures and appliances, then punch list. A full reconfiguration with moved plumbing lands closer to 6 weeks; a straight swap-in-Place layout runs closer to 4. Every project closes with a walkthrough against the approved plan and the 730-Day Done Right Promise behind it.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Options You’re Actually Choosing Between

The design decisions that matter most on a layout job are the ones that are hard to reverse. Here’s what we see homeowners weighing, with the honest trade-off on each.

  • Galley vs. island layout – A galley gives you the most efficient work triangle per square foot and suits Irving’s 1950s-era ranch kitchens well. An island adds prep space and seating but needs 42 inches of clearance on all sides; squeeze it and you’ve made the kitchen feel smaller, not bigger.
  • Open to the living area or walls up – Knocking the wall to the dining room is the most requested layout change we get, and it usually means a header and a permit. Worth it in most cases; budget for the structural line item if the wall is load-bearing.
  • Frameless vs. face-frame cabinets – Frameless gives roughly 10% more usable drawer space and reads modern; face-frame with a KraftMaid door style suits the older brick ranches better and holds up well over decades. Neither is wrong; the house should decide.
  • Quartz vs. granite vs. butcher block – Quartz is the durable default and holds up against staining, granite brings a natural look at similar cost, and butcher block is warmer but requires re-oiling and shows knife marks.
  • Keeping or moving the sink – Keeping it under the window is the cheapest, cleanest layout. Moving it turns a $0 decision into a plumbing line item plus a permit and adds a week to the schedule.

What Kitchen Design & Layout Costs in Irving, TX

Design and layout work on its own, without the cabinet install, runs about $1,200 – $3,500 for a working plan with drawings and selections. Once the layout includes cabinet and counter installation, the full Kitchen Design & Layout range is $14,000 – $45,000. If you’re working a smaller footprint, the range sits closer to $9,000 – $20,000, and cabinet installation alone lands at $4,000 – $13,000. Countertop installation runs $2,000 – $6,500 and backsplash $800 – $2,500, and an island adds $3,000 – $10,000. Five things push a job toward the high end: whether plumbing or electrical moves, whether a wall comes down (structure plus permit), the cabinet grade and door style, stone counter choice, and kitchen size.

Your written estimate lists the line items in full: design time, demo, permit, rough-in trades, cabinets, counters, tile, fixtures and labor. It doesn’t include structural engineering if a beam turns out to be needed, appliance delivery charges from the retailer, or any change you request after the cabinets are ordered. We flag anything the site walk can’t predict before it happens, not after.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Irving Homes Do to a Kitchen Layout

Irving is really two construction markets side by side. The mid-century core through South Irving and the Hospital District, ZIP codes like 75062 and 75037, is 1950s to 1970s brick-veneer ranch country, and that’s where most of our layout work lives. Those kitchens were built small, often with a galley and a peninsula, and the walls that separate kitchen from dining are frequently load-bearing. In the older homes on shallow footings, a widened opening may need a header sized correctly for the structure, which is a detail worth catching on the design side rather than mid-demo. Out toward Las Colinas and Valley Ranch in 75038 and 75039, the housing stock is 1980s to 2000s subdivision product with much larger footprints, so the layout question shifts from “how do we gain space” to “how do we rework an island kitchen so the flow actually works.” Same job, different answer.

Two more things peculiar to Irving. The City’s permitting runs through the Building Inspections office, and moving a plumbing fixture or an electrical circuit means a permit and an inspection – we pull it and see it through, which matters for resale. And North Texas black-clay soils move, which means a kitchen built over a post-tension slab often shows the tell early: cracks at the cabinet line, doors that won’t close. If we see that during the site walk, we flag it before design starts, because a layout that ignores a moving slab is a layout that fights you for years. This is also where homeowners often pair their kitchen plan with Vanities, Tile & Fixtures in Irving when the adjacent hall bath is on the same schedule, or with Small Bathroom Remodels in Irving when a powder room shares the same wall.

Serving Irving, TX – Our Local Coverage Area

We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked – Kitchen Design & Layout in Irving

Get a Free Kitchen Design & Layout Estimate in Irving

We’ll come to your kitchen, measure the space, walk the walls and the existing rough-in, and talk through two or three layouts before anyone quotes a number. You leave the visit with a written line-item estimate, a design direction and a dated schedule. Pair it with the wider scope in Kitchen Remodeling in Irving if you’re planning the whole room, or start with our Kitchen Remodeling service for a broader look. We cover Irving and the surrounding communities. Call Groundwork Construction Co. of Dallas at (844) 797-4808 for a free estimate and design consult.

Written by the team at Groundwork Construction Co.

Why Irving Chooses Groundwork Construction Co. of Dallas

We set the standard for kitchen design & layout in Irving.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Irving

Getting your kitchen design & layout project started is simple.

1

Call or Request a Free Estimate

Tell us about your kitchen design & layout project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local kitchen design & layout pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Irving Customers Say

Trusted by homeowners across Irving and surrounding areas.

★★★★★

"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."

Craig Whitaker
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett

Ready for Kitchen Design & Layout in Irving?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Irving.

(844) 797-4808

Request a Free Estimate in Irving

Tell us about your kitchen design & layout needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - 24/7 Dispatch