Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Small Bathroom Remodels in Irving, TX: What They Cost and How Long They Take
Most small bathroom remodels in Irving run $5,000 to $12,000 and take two to three weeks of active work, from demolition through final inspection. A hall bath or guest bath under 50 square feet is the sweet spot: one shower or tub, one vanity, one toilet, and a tile floor. Call (844) 797-4808 for a free on-site estimate and a written line-item quote before anything gets demoed.
How we run a small bathroom remodel, stage by stage
Small bathrooms are tight spaces with a lot of plumbing packed into them. Sequence matters more here than in a big room, because once the walls are open you only get one clean shot at moving rough-in before tile goes back up. Here’s the order we work in.
Stage 1 – Walkthrough and layout (1 visit, before any work starts). We measure the room, check what’s behind the walls where we can, and confirm what stays and what moves. This is where you decide the layout: keep the tub and toilet in place (cheapest), or shift the vanity a few feet (adds plumbing cost). You’ll also pick your tile and fixture finishes at this stage, because lead times on special-order items can stretch a project. We pull the permit after you approve the plan.
Stage 2 – Demo and rough-in (2 to 3 days). We strip the room to studs and subfloor, haul away the old tub, vanity, and toilet, and open the walls for plumbing and electrical changes. If you’re relocating a drain or adding a GFCI outlet near the sink, it happens now. The rough-in inspection usually falls at the end of this stage or the start of the next one.
Stage 3 – Substrate, waterproofing, and tile (5 to 8 days). Cement board or a waterproof membrane goes up in the wet zone, then tile. This is the longest single stretch of the job, and it’s where small bathrooms get unforgiving: a sloped shower pan or a niche has to be right the first time. You’ll approve tile layout and grout color before we set the first piece.
Stage 4 – Fixtures and finish (2 to 3 days). Vanity, toilet, shower valve trim, glass or curtain rod, lighting, and paint. If you chose a Delta or Moen shower valve, this is when the trim kit goes on. You’ll walk the room with us before we call it finished.
Stage 5 – Final inspection and punch list (1 day). The city inspector signs off on plumbing and electrical, and we handle any punch items you flag during the walkthrough. That’s the last step before we hand the room back.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that actually shape a small bath
In a room this size, a few decisions carry most of the weight. Here’s how they trade off:
- Tile vs. a prefab surround. A tiled shower wall in porcelain or ceramic runs more in labor and material but holds up for decades and lets you match the floor. A prefab surround is cheaper and faster to install, but it looks like what it is and can crack at the seams over time.
- Alcove tub vs. shower-only. Keeping an alcove tub is usually the lowest-cost route; converting to a walk-in shower adds framing and waterproofing work. If the tub stays, you’re mainly choosing a new tub or a refinish.
- Vanity size and grade. A 30-inch stock vanity gets you in and out fast. A 36-inch vanity with a quartz top costs more but buys real counter space in a room where every inch counts.
- Fixture brands. Moen, Delta, and American Standard all have reliable mid-range lines; we’ll walk you through which models have parts available locally versus special-order.
- Ventilation. A properly sized exhaust fan matters in a small, humid room. An undersized fan is the difference between a bath that dries out and one that grows mildew on the ceiling.
What Small Bathroom Remodels cost in Irving, TX
The lead range for this page is $9,000 to $28,000 for full bathroom remodels in Irving, with small bathroom remodels typically landing at $5,000 to $12,000. That low-to-high spread comes down to a handful of variables.
- Size and layout changes. A straight cosmetic refresh in a 5×8 hall bath sits near the bottom. Moving the toilet or adding a second sink pushes you toward the top.
- Existing condition. Hidden rot around the tub, a failing cast-iron drain, or old galvanized supply lines turn a simple swap into real plumbing work. Small bathrooms hide problems behind the tile better than any other room.
- Material grade. Stock vanity and basic ceramic tile versus a custom vanity and large-format porcelain. Tile labor is a big line item.
- Relocating plumbing, electrical, or structure. Each move costs money and each move triggers more inspection.
- Permit scope. Tile and paint usually don’t need a permit; plumbing and electrical changes do. We pull what’s required and we don’t skip it.
Every estimate is written line by line, so you can see where the number comes from and what you’re paying for. We honor that number with no change orders unless you change the scope. Jobs over $10,000 get $1,000 off, and 0% financing for 18 months is available if spreading the cost helps.
See the difference
Before
After
Before
After
Before
AfterWhat Irving homes specifically do to this job
Irving is really two construction markets along the SH-114 corridor, and the older South and central side shapes most of the small baths we open up. In 75060 and 75061 you’re working in 1950s-to-1970s brick ranches and small tract homes, and those bathrooms were built tight and plumbed with whatever the era gave them. We regularly find cast-iron drains past their service life and supply lines that need replacing once the wall is open.
The other thing South Irving does to a bathroom remodel is the subfloor. The black clay soil here swells and shrinks with the wet-dry cycle, and older homes on shallow footings can telegraph movement into the floor. A floor that isn’t flat is a tile problem waiting to happen, so we check for it before setting tile. On the Las Colinas and Valley Ranch side, the housing stock runs newer and the work leans more toward updating builder-grade finishes. Wherever we’re working in Irving, we pull the permit, meet the inspector, and confirm the rough-in passes before tile goes back up. If your project grows past a small bath and touches the roof or gutters, homeowners often pair this with Specialty Roofing in Irving or Gutters & Accessories in Irving while the crews are already on site.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Small Bathroom Remodels in Irving
Plan on two to three weeks of active construction, plus a few days of buffer for material lead times and inspection scheduling. The longest stretch is tile and waterproofing, typically five to eight days. Call (844) 797-4808 and we’ll give you a schedule specific to your room.
You need a permit if the project changes plumbing or electrical; cosmetic work like tile and paint usually doesn’t require one. We pull the permit and handle the inspection so there’s no question about what was done. Call (844) 797-4808 for a free estimate that spells out what’s permitted.
Yes, and it’s the most budget-friendly route. Keeping the tub, toilet, and sink in their existing spots avoids moving drains and supply lines, which keeps both labor and inspection costs down. Call (844) 797-4808 and we’ll tell you honestly whether moving anything is worth it for your layout.
Small bathroom remodels in Irving typically run $5,000 to $12,000, with full bathroom remodels in the $9,000 to $28,000 range depending on size and scope. Call (844) 797-4808 for an exact quote – estimates are free.
Every small bathroom remodel is backed by our 730-Day Done Right Promise – if something isn’t done right, we make it right. That covers workmanship for two full years, not a short window. Call (844) 797-4808 to talk through what that means for your project.
Get a free estimate for your Irving bathroom
When you call (844) 797-4808, a live person picks up, day or night. Tell us the room and what you want to change, and we’ll set an on-site walkthrough where you get a written line-item quote and a clear schedule. No pressure and no surprises – just a number you can plan around. You can also start with a Bathroom Remodeling in Irving look at the wider project, our Bathroom Remodeling service, or the Irving service area we cover.
Written by the team at Groundwork Construction Co.