Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sliding & Patio Doors in Irving: What the Job Actually Involves
Sliding and patio door replacement in Irving usually runs $4,500 to $15,000 for the project, with most single-opening swaps landing between $4,500 and $8,500 and full multi-panel systems at the higher end. The work itself takes one to three days once materials are on site, and custom sizes can add two to four weeks of lead time. Call (844) 797-4808 for a free on-site estimate. We’ll walk the opening, check the header and threshold, and hand you a written line-item quote the same week.
How We Replace Sliding & Patio Doors, Start to Finish
A door replacement is a short job with long consequences if the flashing and threshold aren’t handled correctly. Here’s how the stages actually run when we work on an Irving home.
Stage 1 – On-site measure and scope (day 1, about 60 minutes). We pull the interior trim back far enough to see the framing and check whether the existing header is load-bearing. You decide at this visit whether you’re keeping the same rough opening size or going bigger, which determines whether a permit and header work are needed. The written estimate goes out after this visit.
Stage 2 – Order and permit (week 1 to week 3). Standard sizes from our brand partners arrive in roughly 5 to 10 business days. Anything custom runs 3 to 6 weeks. If the opening is being enlarged, we file the Irving permit now, since inspection scheduling adds a few days to the front of the schedule. You confirm the panel configuration, glass package, and finish color before the order is released.
Stage 3 – Demo and opening prep (day 1 of install, 3 to 5 hours). We remove the old door, cut back the interior and exterior trim, and inspect the sill and rough sill for rot or water damage. This is where older homes surprise people: soft framing behind the threshold is common enough that we budget for it and tell you before we touch it.
Stage 4 – Setting and flashing (day 1 into day 2). The new unit goes in, gets shimmed and leveled, and the exterior gets a full flashing system: sill pan, side flashing, head flashing, sealant in the correct sequence. We don’t caulk over a bad flashing job and call it done. Interior trim and threshold go back on during this stage.
Stage 5 – Inspection and final walk (day 3). If a permit was pulled, the inspection happens here. Then we walk the door with you: check the slide, the lock engagement, the screen track, and the weep holes. Most jobs finish in three working days on site.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Sliding & Patio Door Options You’ll Choose Between
This is where most of the budget decision happens, and it’s worth understanding the trade-offs before anyone quotes you a number.
- Sliding vs. hinged patio door. A sliding door saves swing space and is the natural choice for a small Irving ranch with a tight patio. A hinged French door looks better on a wide opening but eats 3 feet of floor space and costs 15 to 25 percent more once you account for the framing and hardware.
- Vinyl vs. fiberglass vs. wood-clad frames. Vinyl is the value play and handles North Texas heat well; fiberglass holds its shape better on large panels; wood-clad with an Andersen or Marvin line looks premium and lasts decades. Expect roughly 20 to 40 percent cost difference between vinyl and fiberglass for the same opening.
- Glass package. Standard dual-pane is fine. Low-E with argon and a laminated impact-rated option cost more upfront but cut summer heat gain, which matters on a west-facing patio door in Irving.
- Panel configuration. Two-panel sliding is the standard. Three- and four-panel multi-slide systems open wider and look dramatic but require a wider rough opening and a heavier header, which changes the framing scope.
- Threshold and screen. Low-profile ADA-style thresholds, retractable screens, and keyed locks are the small upgrades most homeowners add after seeing the base quote.
What Sliding & Patio Doors Cost in Irving, TX
Expect $4,500 to $15,000 for sliding and patio door replacement in Irving, depending on opening size, panel count, and material grade. A single standard two-panel swap sits at the low end; a multi-slide system with a widened opening and impact glass sits at the high end.
Here’s what pushes a job from the bottom of that range to the top:
- Opening size and header work. Enlarging the rough opening means a new header, framing, and often a permit, which adds real dollars and days.
- Existing condition. Rot behind the sill, a settled threshold, or a slab that needs leveling behind it are the most common surprise costs on older Irving homes.
- Glass package. Laminated impact glass and Low-E coatings each bump the material line.
- Material grade. Vinyl to wood-clad is a real jump; fiberglass lands in between.
- Permit scope. A like-for-like swap often needs no permit; structural changes do.
A written estimate from us includes the door, hardware, flashing, sealant, trim work, haul-away, and labor. It does not include unforeseen rot repair or structural framing changes, but we flag those on the walk before you sign anything. One price, no change orders for work we could have quoted at the start. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off. Every install is backed by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Irving Homes Specifically Do to This Job
Irving is two construction markets rubbing against each other, and sliding door work feels both of them. In the mid-century core around the old downtown and the Hospital District (75060, 75061, 75062), the homes are 1950s-to-1970s brick-veneer ranches. Those original aluminum slider units are 40 to 60 years old now, and the typical failure modes we see are fogged glass, a worn roller track, and a rotted rough sill after decades of North Texas rain against a shallow threshold. On the other side, in the Las Colinas and Valley Ranch corridor (75038, 75063), you’re dealing with 1980s-to-2000s subdivision product and a lot of multifamily and hospitality construction where the door spec has to meet commercial-grade standards. The black-clay soils underneath both zones swell and shrink with the wet-dry cycle, so a door that won’t slide smoothly is sometimes a settled slab, not a bad roller. A contractor who hasn’t worked this soil will just replace the track and be back next year. Our technicians have up to 12 years of experience reading exactly these failure modes, and when the door is part of a full Windows & Doors in Irving scope, we plan the sequence so the openings are handled together. You can also see our broader work on the Irving service area page.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Sliding & Patio Doors in Irving
A standard swap takes one to three working days on site once the door is delivered, and custom sizes can add 3 to 6 weeks of lead time. Call (844) 797-4808 to lock in a delivery date and schedule.
A like-for-like replacement in the same rough opening typically does not require a permit, but enlarging the opening or changing the header does. We pull the permit and handle inspection when the scope calls for it, and we’ll tell you upfront which side you’re on.
Yes, if the new door matches the existing rough opening, the framing stays untouched, and there’s no plumbing or electrical in the wall. Enlarging the opening is the one case that changes the scope, and we flag it at the measure visit.
Most jobs land between $4,500 and $15,000, with a standard two-panel swap near the low end and a multi-slide system near the high end. Call (844) 797-4808 for an exact quote, the estimate is free and comes in writing.
Every install is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction, on top of the manufacturer’s product warranty. If something isn’t right, we make it right, and you’ll have it in writing before we start.
Get a Free Estimate on Sliding & Patio Doors in Irving
Call (844) 797-4808 to schedule a free on-site estimate for sliding and patio doors in Irving. When you call, a live person answers, day or night. We’ll set a time that works, measure the opening, and hand you a written line-item quote with no surprises. If you’re already planning to redo the backyard, homeowners often pair this with Fence Repair in Irving or a new Paver Driveways in Irving pour out back. Curious about our Windows & Doors work overall? Take a look, then call us to get started.
Written by the team at Groundwork Construction Co.