A Groundwork company - serving Dallas, TX
Sliding & Patio Doors in Irving, TX | Groundwork Construction Co. of Dallas

Sliding & Patio Doors in Irving - Free In-Home Measure, Written Price

Free in-home measure and an exact written price before anything is ordered. Energy-rated units, professional installation by a licensed local installer, and a workmanship warranty on the install.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Sliding & Patio Doors in Irving: What the Job Actually Involves

Sliding and patio door replacement in Irving usually runs $4,500 to $15,000 for the project, with most single-opening swaps landing between $4,500 and $8,500 and full multi-panel systems at the higher end. The work itself takes one to three days once materials are on site, and custom sizes can add two to four weeks of lead time. Call (844) 797-4808 for a free on-site estimate. We’ll walk the opening, check the header and threshold, and hand you a written line-item quote the same week.

Call (844) 797-4808

How We Replace Sliding & Patio Doors, Start to Finish

A door replacement is a short job with long consequences if the flashing and threshold aren’t handled correctly. Here’s how the stages actually run when we work on an Irving home.

Stage 1 – On-site measure and scope (day 1, about 60 minutes). We pull the interior trim back far enough to see the framing and check whether the existing header is load-bearing. You decide at this visit whether you’re keeping the same rough opening size or going bigger, which determines whether a permit and header work are needed. The written estimate goes out after this visit.

Stage 2 – Order and permit (week 1 to week 3). Standard sizes from our brand partners arrive in roughly 5 to 10 business days. Anything custom runs 3 to 6 weeks. If the opening is being enlarged, we file the Irving permit now, since inspection scheduling adds a few days to the front of the schedule. You confirm the panel configuration, glass package, and finish color before the order is released.

Stage 3 – Demo and opening prep (day 1 of install, 3 to 5 hours). We remove the old door, cut back the interior and exterior trim, and inspect the sill and rough sill for rot or water damage. This is where older homes surprise people: soft framing behind the threshold is common enough that we budget for it and tell you before we touch it.

Stage 4 – Setting and flashing (day 1 into day 2). The new unit goes in, gets shimmed and leveled, and the exterior gets a full flashing system: sill pan, side flashing, head flashing, sealant in the correct sequence. We don’t caulk over a bad flashing job and call it done. Interior trim and threshold go back on during this stage.

Stage 5 – Inspection and final walk (day 3). If a permit was pulled, the inspection happens here. Then we walk the door with you: check the slide, the lock engagement, the screen track, and the weep holes. Most jobs finish in three working days on site.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Sliding & Patio Door Options You’ll Choose Between

This is where most of the budget decision happens, and it’s worth understanding the trade-offs before anyone quotes you a number.

  • Sliding vs. hinged patio door. A sliding door saves swing space and is the natural choice for a small Irving ranch with a tight patio. A hinged French door looks better on a wide opening but eats 3 feet of floor space and costs 15 to 25 percent more once you account for the framing and hardware.
  • Vinyl vs. fiberglass vs. wood-clad frames. Vinyl is the value play and handles North Texas heat well; fiberglass holds its shape better on large panels; wood-clad with an Andersen or Marvin line looks premium and lasts decades. Expect roughly 20 to 40 percent cost difference between vinyl and fiberglass for the same opening.
  • Glass package. Standard dual-pane is fine. Low-E with argon and a laminated impact-rated option cost more upfront but cut summer heat gain, which matters on a west-facing patio door in Irving.
  • Panel configuration. Two-panel sliding is the standard. Three- and four-panel multi-slide systems open wider and look dramatic but require a wider rough opening and a heavier header, which changes the framing scope.
  • Threshold and screen. Low-profile ADA-style thresholds, retractable screens, and keyed locks are the small upgrades most homeowners add after seeing the base quote.

What Sliding & Patio Doors Cost in Irving, TX

Expect $4,500 to $15,000 for sliding and patio door replacement in Irving, depending on opening size, panel count, and material grade. A single standard two-panel swap sits at the low end; a multi-slide system with a widened opening and impact glass sits at the high end.

Here’s what pushes a job from the bottom of that range to the top:

  • Opening size and header work. Enlarging the rough opening means a new header, framing, and often a permit, which adds real dollars and days.
  • Existing condition. Rot behind the sill, a settled threshold, or a slab that needs leveling behind it are the most common surprise costs on older Irving homes.
  • Glass package. Laminated impact glass and Low-E coatings each bump the material line.
  • Material grade. Vinyl to wood-clad is a real jump; fiberglass lands in between.
  • Permit scope. A like-for-like swap often needs no permit; structural changes do.

A written estimate from us includes the door, hardware, flashing, sealant, trim work, haul-away, and labor. It does not include unforeseen rot repair or structural framing changes, but we flag those on the walk before you sign anything. One price, no change orders for work we could have quoted at the start. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off. Every install is backed by our 730-Day Done Right Promise.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Irving Homes Specifically Do to This Job

Irving is two construction markets rubbing against each other, and sliding door work feels both of them. In the mid-century core around the old downtown and the Hospital District (75060, 75061, 75062), the homes are 1950s-to-1970s brick-veneer ranches. Those original aluminum slider units are 40 to 60 years old now, and the typical failure modes we see are fogged glass, a worn roller track, and a rotted rough sill after decades of North Texas rain against a shallow threshold. On the other side, in the Las Colinas and Valley Ranch corridor (75038, 75063), you’re dealing with 1980s-to-2000s subdivision product and a lot of multifamily and hospitality construction where the door spec has to meet commercial-grade standards. The black-clay soils underneath both zones swell and shrink with the wet-dry cycle, so a door that won’t slide smoothly is sometimes a settled slab, not a bad roller. A contractor who hasn’t worked this soil will just replace the track and be back next year. Our technicians have up to 12 years of experience reading exactly these failure modes, and when the door is part of a full Windows & Doors in Irving scope, we plan the sequence so the openings are handled together. You can also see our broader work on the Irving service area page.

Serving Irving, TX – Our Local Coverage Area

We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked – Sliding & Patio Doors in Irving

Get a Free Estimate on Sliding & Patio Doors in Irving

Call (844) 797-4808 to schedule a free on-site estimate for sliding and patio doors in Irving. When you call, a live person answers, day or night. We’ll set a time that works, measure the opening, and hand you a written line-item quote with no surprises. If you’re already planning to redo the backyard, homeowners often pair this with Fence Repair in Irving or a new Paver Driveways in Irving pour out back. Curious about our Windows & Doors work overall? Take a look, then call us to get started.

Written by the team at Groundwork Construction Co.

Why Irving Chooses Groundwork Construction Co. of Dallas

We set the standard for sliding & patio doors in Irving.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Irving

Getting your sliding & patio doors project started is simple.

1

Call or Request a Free Estimate

Tell us about your sliding & patio doors project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local sliding & patio doors pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Irving Customers Say

Trusted by homeowners across Irving and surrounding areas.

★★★★★

"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."

Craig Whitaker
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett

Ready for Sliding & Patio Doors in Irving?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Irving.

(844) 797-4808

Request a Free Estimate in Irving

Tell us about your sliding & patio doors needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - 24/7 Dispatch