Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Irving, TX: What They Cost and How Long They Take
Paver driveways in Irving typically run $7,000 to $18,000 for a standard two-car installation, and most jobs are finished in five to nine working days once we start digging. The number that actually lands on your estimate depends on square footage, base depth, and which paver you pick. Call (844) 797-4808 for a free on-site estimate and we’ll write the line items out before anyone lifts a shovel.
How We Build a Paver Driveway, Stage by Stage
Paver work fails or succeeds underground. The pavers themselves are the visible part, but about 60% of our labor hours go into what sits beneath them. Here’s the sequence we run on an Irving paver driveway.
- Day 1 – Site walk and layout. We mark the drive, check the existing grade against the street, and confirm the slope away from the house. You decide the paver pattern and the border color at this stage. Fifteen minutes with samples in your hands beats three weeks of second-guessing a photo online.
- Days 1 – 2 – Demo and haul-off. Old concrete comes out and gets trucked away. On South Irving lots we hit the clay fast, and if the old slab was poured thin, it comes up in pieces. If there’s a sprinkler line or gas stub in the footprint, we flag it and you decide whether to reroute.
- Days 2 – 3 – Excavation and base. We dig 8 to 10 inches down for a residential drive – more if you’re parking anything heavier than a pickup. Then crushed stone goes in lifts and gets compacted with a plate tamper. This is the step that separates a driveway that lasts 25 years from one that ruts in three.
- Day 4 – Edge restraint and bedding sand. Aluminum or concrete edge restraint gets pinned along both sides so the field doesn’t creep. A screeded layer of coarse bedding sand goes on top, at about an inch.
- Days 5 – 7 – Paver install and cuts. Field pavers lay in from a corner, and border courses get cut to the running bond. You’ll see the pattern emerge on day five and know exactly what you bought.
- Days 7 – 9 – Compaction, joint sand, cleanup. A final plate compactor pass settles the pavers into the bedding, then polymeric sand goes into the joints and gets watered in to lock. We sweep, we haul, and you drive on it the same evening.
Homeowners make two real decisions here: which paver and pattern, and whether to add drainage. Everything else we carry. If you’re also considering a wider hardscape scope, this work fits naturally inside a full Driveway & Pavers in Irving project, and our broader Driveway & Pavers service covers patios, walkways and pool decks if you want to tie them in.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Paver Options and the Honest Trade-Off on Each
Most Irving homeowners choose between four material families. Here’s what each actually delivers.
- Concrete pavers (the standard choice). Belgard and similar lines make up the bulk of what we install. Cost sits in the $7,000 to $13,000 range for a standard drive. High compressive strength, holds color well, and the interlocking pattern tolerates the North Texas clay moving under it far better than poured concrete.
- Clay brick pavers. Warmer look, longer lifespan, and each unit is heavier and denser. Pushes you toward the $13,000 to $18,000 end for the same square footage. Best for homeowners restoring older South Irving brick-veneer homes who want the front elevation to stay period-correct.
- Tumbled or antiqued finish. A softer, worn-edge look that hides tire marks and construction dust better than a sharp-edged paver. Adds roughly 10% to material cost. Popular in Las Colinas and Valley Ranch where the surrounding architecture leans toward stone and stucco.
- Permeable pavers. Open-graded joints let water pass through into a stone reservoir beneath. Higher install cost and it needs a properly sloped sub-base, but it solves standing water at the driveway apron where the slab meets the street – a genuinely common complaint on older lots.
- Pattern and border detail. Herringbone and running bond are the durable standards. A contrasting soldier-course border adds 5 to 8% to the price and holds the field together at the edges. Skip the border and you’ll see edge settling within a few seasons.
What Paver Driveways Cost in Irving, TX
A paver driveway installation in Irving runs $7,000 to $18,000, with the typical two-car job landing near $11,000. Five variables push a quote to either end:
- Square footage. A single-car drive around 300 square feet sits at the low end. A two-and-a-half-car drive with a turnaround can double the number.
- Base depth and soil conditions. Irving’s black-clay soils swell and shrink through the wet-dry cycle, so we build base deeper than crews in sandy markets do. If the excavation uncovers bad fill or old slab debris buried under the lot, that’s added labor and haul-off.
- Paver grade and pattern complexity. Standard concrete pavers vs. clay brick vs. permeable systems shifts the material cost by thousands. Complex laid patterns with lots of field cuts cost more in labor.
- Drainage correction. If the existing grade drains back toward the garage, we have to re-grade and add a channel drain or a dry well. Plan on $600 to $2,500 depending on what’s needed.
- Removal and disposal. A clean footprint with no existing slab is cheaper. Tearing out 4-inch concrete and hauling it to a landfill adds on.
Written estimates include demo, haul-off, excavation, compacted base, edge restraint, pavers, polymeric joint sand, and cleanup. They typically do not include utility relocation, driveway widening that triggers new paving beyond the footprint, or a new apron from the sidewalk curb. Our upfront pricing means the number you see is the number you pay. Jobs over $10,000 also carry $1,000 off, and 0% financing for 18 months is available. Every installation is backed by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Irving Homes Specifically Do to This Job
South and central Irving – the old downtown core, the Hospital District, and the postwar streets in ZIP codes 75060 and 75062 – is dominated by 1950s to 1970s brick-veneer ranches. Many of those drives were poured thin and have heaved where tree roots pushed up through the slab. We see it constantly around the neighborhoods off Story Road and east of MacArthur Boulevard. On these lots the original drive is often narrower than what a modern household actually parks on, so we’re frequently widening, re-grading, and adding a border course to make the front elevation read right. The old slab depth also matters: on a 1962 ranch with 3 inches of concrete, the demo crew is finished in a morning. On a Las Colinas or Valley Ranch 1990s subdivision, driveways often meet an HOA architectural review, and paver color or finish changes sometimes need a written approval before we open a bag of sand. We handle that paperwork step as part of the scope. If you’re on the 75038 or 75039 side of the corridor, plan on an extra week for the review. It’s the same problem across Irving: the base under a paver driveway does all the work when the clay starts moving, and there’s no shortcut around it.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked About Paver Driveways in Irving
Most paver driveways take five to nine working days from demo to the first drive-on. A simple 300-square-foot single-car drive lands around five days. Larger jobs with drainage correction or HOA review push to the nine-day side. Weather can delay base compaction, but once pavers are on the truck, the schedule holds.
Permits are typically required when the work touches the right-of-way, changes the curb cut, or widens the drive beyond the original footprint. A same-size replacement on private property often doesn’t trigger one. We verify with the City of Irving before the estimate is final and pull whatever is needed. Call (844) 797-4808 and we’ll tell you exactly what your address requires.
We don’t recommend an overlay for a driveway, and in most cases we won’t do it. A paver drive needs bedding sand and a compacted base to work. Placing pavers directly over an existing slab traps moisture and leaves no room for the base that makes pavers last. Full removal is the right call, and our quotes include it.
Paver driveways in Irving run $7,000 to $18,000, while a concrete driveway installation runs $4,500 to $12,000. Pavers cost more up front, roughly 40 to 60% more. The trade is durability: pavers tolerate the black-clay swell-shrink cycle, and a cracked unit can be lifted and replaced without redoing the whole drive. Call us for a free estimate and we’ll walk you through both options in writing.
Every paver driveway we install is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. Problems in the first two years are handled at no cost to you.
Get a Free Paver Driveway Estimate in Irving
Call (844) 797-4808 and a live person answers any hour, any day. We’ll schedule a free on-site estimate at your Irving property, measure the drive, check the grade, and put a written line-item quote in your hands with no change orders later. Calls are answered around the clock, technicians arrive background-checked and in uniform, and every paver driveway we build is covered from foundation to finish line by the 730-Day Done Right Promise.
Homeowners planning more than a drive often pair this with ADU Design & Permitting in Irving or a Garage Conversion ADU in Irving if they’re adding parking or living space at the same time. We’re proud to cover Irving and the surrounding communities of Farmers Branch, Coppell, Euless, and University Park.
Written by the team at Groundwork Construction Co.