Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Junior ADU & Interior Conversion in Irving, TX: What It Actually Takes
A Junior ADU & Interior Conversion in Irving usually runs $45,000 – $130,000 and takes 3 – 5 months from permit filing to final inspection. You’re carving a code-compliant living space out of existing square footage – an attached junior suite, an in-law unit, a converted guest wing – and tying it legally to the house. Call (844) 797-4808 and we’ll walk your address and give you a real number.
From First Walkthrough to Final Inspection: How We Run a Junior ADU & Interior Conversion
The work breaks into five stages, and each one has a decision on your plate. Here’s the sequence we follow on every Junior ADU & Interior Conversion in Irving.
Stage 1 – Site and feasibility walkthrough (day 1, about 90 minutes)
We measure the candidate rooms, open the attic and crawl access, and photograph the panel. You decide which space you’re converting: a garage-adjacent room, a spare bedroom wing, a screened porch that gets brought inside the thermal envelope. This is also where we flag structural limits – spot the shallow footing or a bearing wall you can’t touch without re-engineering, and that conversation happens now, not after demo.
Stage 2 – Design and permit submission (weeks 1 – 4)
We produce the floor plan, electrical and plumbing sheets, and a scope narrative for the city. You pick the layout: whether the junior unit gets its own exterior entry, a kitchenette, a stacked washer-dryer, a full bath or a three-quarter. Filed plans in Irving move through plan review in roughly two to five weeks depending on how busy the counter is, and revisions add time. Your decision here: the spec package so we can lock the bid.
Stage 3 – Demo and rough-in (weeks 5 – 8)
Day one of demo is selective – we pull finishes, not structural members. Rough plumbing and electrical go in next, which is where a job either stays on budget or grows. Moving a drain line or relocating the panel pushes the number. Then the rough inspection and the frame inspection happen back to back. You approve locations for fixtures and outlets before the drywall closes.
Stage 4 – Insulation, drywall, systems (weeks 8 – 13)
Insulation and drywall take about ten working days on a typical junior unit. Mechanical trim – the HVAC, water heater, and any dedicated circuit for a range or dryer – gets finished here. You make the finish decisions: flooring, paint, cabinet fronts, tile. We order the long-lead items at Stage 2 so they aren’t sitting in a warehouse holding up the drywall.
Stage 5 – Finishes, final inspection, walkthrough (weeks 13 – 20)
Set cabinets and fixtures, install flooring and trim, paint. The final inspection is scheduled once the certificate of occupancy items are cleared. Then the walkthrough, where we hand over the as-built drawings and the warranty paperwork. Most of this stage is finish work, which is also where the schedule can slip if a tile or cabinet selection changes late. Every project is covered by our 730-Day Done Right Promise, and the technicians doing the finish work are background-checked and in uniform.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Shape Your Junior ADU & Interior Conversion
Most of the money sits in four or five decisions. Here’s what you’re actually choosing between.
- Entry configuration. An interior-only junior ADU shares the main foyer and saves $6,000 – $14,000 in exterior door, step, and path work – but it won’t satisfy a lender or a tenant who wants independence. A dedicated exterior entry costs more but changes how the unit gets used and valued.
- Kitchenette type. A sink-and-fridge nook runs a few thousand; a full counter with a 24-inch range and under-counter fridge pushes toward the top of the budget. European appliance lines like a compact Bosch or a Fisher & Paykel drawer fridge fit tight footprints and hold up. The trade-off is repair cost down the road.
- Bath scope. A three-quarter bath (shower, no tub) is the workhorse and the cheapest compliant option. A full bath with a tub adds framing, floor reinforcement, and plumbing work. Walk-in shower conversions are usually the better fit in an aging South Irving ranch with a small footprint.
- HVAC approach. A dedicated mini-split for the junior unit is often the cleanest answer – it lets the occupant set their own temperature and doesn’t drag the main system. Extending the existing ductwork is cheaper upfront but ties the unit to the house thermostat.
- Sound isolation. Insulating the shared walls and the ceiling between floors adds a small line item and a large livability gain. You’ll hear the difference the first week. It’s the one upgrade most homeowners wish they’d bought.
- Window and glazing spec. Impact-rated units from lines like CGI, CWS, or ES Windows cost more per opening but suit the North Texas hail season and cut summer cooling load. Standard glazing is fine for interior rooms with no exposure.
What Junior ADU & Interior Conversion Costs in Irving, TX
Plan on $45,000 – $130,000 for the full job in Irving, with most interior conversions landing toward the lower half and detached or garage-inclusive junior units toward the top. Five variables drive the spread:
- Square footage. A 400 sq ft junior suite usually sits near $45,000 – $75,000. Push past 700 sq ft with full kitchen and bath and you’re in the $95,000 – $130,000 zone.
- Moving plumbing or electrical. Relocating a drain or extending the panel to a subpanel adds real money. Keeping fixtures close to existing stacks is the single biggest cost lever.
- Structural changes. Opening a bearing wall or cutting a new exterior door has to be engineered, especially on the older slabs in South Irving. Structural work can add five figures.
- Finish grade. Stock cabinet fronts and LVP flooring vs. custom millwork and quartz countertops. Same job, different number.
- Permit scope. A conversion with a new bath and kitchenette requires the full plan review and multiple inspections. A single-room conversion without plumbing is faster and cheaper.
A written line-item estimate from us lists demo, rough-in, insulation, drywall, finishes, fixtures, permit fees, and inspection allowances separately. It does not include furniture, appliances you supply directly, landscaping to a new exterior entry, or any structural repair uncovered behind a wall once demo opens it. Those get a written change order with the number in it before anyone touches a tool. Our pricing is upfront and fixed, no surprises when the number on the invoice doesn’t match the number on the bid.
See the difference
Before
After
Before
After
Before
AfterWhat Irving Homes Specifically Do to This Job
Irving is two construction markets stitched together along the SH-114 corridor. On the older core around the Hospital District and South Irving – the 75060, 75061, 75062 ZIPs – you’re working in 1950s to 1970s brick-veneer ranches, often built on shallow footings that sit on North Texas black clay. That clay swells in spring and shrinks in August, and the movement is why a junior ADU conversion in a 60-year-old ranch here almost always starts with an engineer’s look at the slab before anyone frames. We’ve seen more than one homeowner surprised that the wall they wanted to remove carries load down to a footing that was never sized for what they had in mind.
The 75038 and 75039 ZIPs – Las Colinas, Valley Ranch – are a different story. Homes there are 1980s to 2000s subdivision product with post-tension slabs and more current structural assumptions, so a conversion in that zone often moves faster through plan review. Meanwhile the commercial construction volume tied to DFW and the Irving Convention Center keeps the inspection counters busy, which is why we file early and budget real time for review. The DFW hail season also pushes impact-rated glazing toward the top of the list when we spec windows. If you’re on one of the older lots and considering a wider scope, we also run Home Additions & ADU in Irving as part of a full addition rather than a conversion.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Junior ADU & Interior Conversion in Irving
Most run 3 – 5 months from permit filing to final inspection, with about four weeks of that in plan review and the rest in construction. A simple single-room conversion without plumbing can finish in ten to twelve weeks. Call (844) 797-4808 to get a site-specific timeline – the walkthrough is free.
Yes, you do. Adding a kitchenette, a bath, or a sleeping area to a house triggers a building permit, plus electrical and plumbing permits, and a final inspection before it’s legal to use. We pull the permits and carry the inspections as part of the job. Call (844) 797-4808 and we’ll walk through what your address will require.
Often yes, and it’s the biggest cost saver. Keeping fixtures close to existing stacks and working within the current bearing walls drops a conversion toward the $45,000 – $70,000 range. When structural changes are needed, we bring in engineering early. Call (844) 797-4808 to see what’s possible in your floor plan.
Plan on $45,000 – $130,000, with most interior-only conversions landing between $55,000 and $85,000. Square footage, plumbing relocation, structural work, finish grade, and permit scope move the number. Estimates are free, and you get a written line-item quote – call (844) 797-4808.
Every project we complete is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers workmanship on the conversion for over two years. The technicians are background-checked and in uniform, and the brand partners behind the materials stand behind their products. Call (844) 797-4808 with questions about coverage.
Ready for a Real Number on Your Irving Conversion?
Call (844) 797-4808 to schedule a free on-site estimate for a Junior ADU & Interior Conversion in your Irving home. We’ll walk the space, photograph the panel and slab, tell you what the conversion realistically involves, and hand you a written line-item quote within a few days – no pressure and no surprises. Our Home Additions & ADU team covers Irving and the surrounding areas, and many homeowners pair this work with Kitchen Design & Layout in Irving or Small & Partial Kitchen Remodels in Irving.
Written by the team at Groundwork Construction Co.