Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Duncanville, TX: What It Costs and How Fast It Goes In
A chain link fence in Duncanville typically runs $3,500 to $9,000 for a standard residential lot, and most jobs go from layout to stretched-and-tensioned in one to three days once materials are on site. That range covers 4-foot to 6-foot galvanized or vinyl-coated chain link, set posts, top rail, tension wire, and at least one walk gate. Call (844) 797-4808 and we’ll walk your lot line with you and give you a written, line-item number before anyone touches a shovel.
How We Put Up Chain Link Fence in Duncanville, Start to Finish
A chain link job is simple in theory and easy to get wrong in practice. Here’s the real sequence, with the decisions that land on you at each stage.
Stage 1: The on-site measure and layout (day of estimate, about 45 minutes)
We walk the property line, flag the corners, and confirm the actual footage. This is where you decide fence height (4-foot, 5-foot, or 6-foot), gauge, coating, and where the gates go. We also check for utilities, because in Duncanville’s older lots the gas and water runs are frequently closer to the line than the homeowner expects. You’ll leave this stage with a written measurement and a firm price, not a “we’ll see when we get out there.”
Stage 2: Utility locate and permit pull (two to five business days)
We call in the locate before any digging, no exceptions. Texas law requires it and a struck gas line in a 1960s Duncanville subdivision is a bad afternoon for everyone. If your project needs a city permit, that paperwork runs in parallel. On a straight like-for-like replacement, most Duncanville chain link work goes without a permit; new perimeter fence on a lot that’s never had one usually does. We’ll tell you which side of that line you’re on in writing.
Stage 3: Demo, layout, and post setting (day one on site)
We pull the old fence, haul it off, and string the new line. Posts go in on 8-foot centers, set in concrete, and the terminal posts at corners and gates get a bigger footing because they carry the tension. Post holes get dug to depth, not “close enough.” This is the day that decides whether the fence stands straight in five years or leans. Nothing visible happens here, which is exactly why it matters.
Stage 4: Rail, fabric, and tension (day two)
Top rail goes up, fabric gets stretched with a come-along, and the tension bar ties off at each terminal. Stretched properly, the fabric is drum-tight and doesn’t sag between posts in August heat. This is also when gates get hung and the hardware set. You’ll want to be around for the gate swing check, because that’s the part you’ll use every day.
Stage 5: Walkthrough and cleanup (day three, or end of day two)
We walk the run with you, check every post, open and close every gate, and clean the site. Concrete footings cure over the following days, so we tell you when it’s safe to lean on it. Everything we install is covered by our 730-Day Done Right Promise: if a post shifts or a gate drops, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Matter on a Chain Link Fence
Chain link isn’t one product. These are the decisions that separate a $3,500 job from a $9,000 one:
- Height (4-foot, 5-foot, or 6-foot). A 4-foot fence keeps a dog in and defines a line. A 6-foot run costs roughly 20 to 30 percent more in material and reads as a real barrier. For a Duncanville backyard with a pool or a large dog, 6-foot is usually the right call.
- Gauge (11.5 vs. 9 vs. 6). 11.5-gauge is the light residential standard. 9-gauge is noticeably stiffer and resists a climbing dog or a leaning branch. 6-gauge is commercial-grade and rarely worth the upcharge on a suburban lot unless you’re fencing something heavy.
- Galvanized vs. vinyl-coated. Bare galvanized is the cheapest and holds up fine in North Texas. Vinyl-coated (black, green, or brown) costs maybe 15 to 25 percent more and looks less institutional. Black-coated chain link has become the default on Duncanville lots where the fence faces a street.
- Top rail and tension wire. A top rail with a tension wire at the bottom keeps the fabric from curling up. Some bids skip the tension wire to hit a number. Ask for it in writing.
- Gates. A walk gate runs a few hundred dollars. A drive gate is a bigger jump because of the heavier posts and framing required. Decide gate count and width before we set posts, not after.
- Post setting. Concrete-set posts cost more than driven posts and last longer in our clay. On a Duncanville lot, concrete-set is the honest choice.
What Chain Link Fence Costs in Duncanville, TX
Plan on $3,500 to $9,000 for a residential chain link fence in Duncanville. Here’s what moves you toward either end:
- Linear footage. The single biggest factor. A typical quarter-acre lot runs 250 to 400 feet of perimeter once you account for the house footprint. More footage, more posts, more fabric, more concrete.
- Height and gauge. 6-foot 9-gauge sits at the top of the range. 4-foot 11.5-gauge galvanized sits at the bottom.
- Coating and color. Vinyl-coated adds to material cost. Galvanized is the budget path.
- Gates. One walk gate is standard. Each additional gate, and especially a drive gate, adds to the number.
- Site conditions. Roots, old concrete footings, a fence line that runs over a retaining wall or a slope, or demolition of an existing fence all push the job up. Removing an old fence and hauling it off is a real line item, not a courtesy.
Your written estimate should list footage, height, gauge, coating, post spacing, concrete, gate count and width, demo and haul-off, and permit fees if any apply. What it typically doesn’t include: grading or clearing brush, dealing with a buried obstacle nobody could see, or repairing a fence that shares a line with a neighbor’s property. We flag those up front rather than surprising you later. Upfront pricing, no surprises is how we run every job.
See the difference
Before
After
Before
After
Before
AfterWhat Duncanville’s Housing Stock Does to a Chain Link Job
Duncanville is a built-out, largely post-war bedroom city, and that shapes this work more than most homeowners expect. Nearly every chain link fence we install here goes onto a 1950s to 1970s brick-veneer ranch on a slab, in ZIP codes 75116, 75137, and 75138. That means we’re usually working around existing property lines that have been surveyed, re-fenced, and moved by three previous owners, with old footings buried six inches down along the run. We dig into them constantly. The expansive black clay soil across Duncanville also heaves and shrinks with our wet-dry cycles, which is why we set posts deeper and in concrete rather than driving them. That’s also the reason a fence that looked straight when it went in can lean after a dry summer, and why we’d rather over-build the footings than come back and reset them. When a fence project is part of a full Fence Installation in Duncanville plan, we coordinate the layout with the rest of the work so nothing gets torn out twice. Homeowners often pair this with Concrete Driveways & Concrete Work in Duncanville when a drive gate and apron are going in at the same time. If you’re working through the whole property, our Fence Installation service is the broader starting point, and you can see the full scope of what we handle across Duncanville. Neighbors in DeSoto, Glenn Heights, and Lancaster are on the same clay and get the same approach. For a drive that needs resurfacing while the fence line is open, homeowners often pair this with Asphalt Driveways & Resurfacing in Duncanville.
Serving Duncanville, TX – Our Local Coverage Area
We serve Duncanville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Duncanville
Most residential chain link fences in Duncanville go in over one to three days on site, after a two-to-five-day window for utility locates and any permit. Straight runs with one gate run faster; a long line with old fence to remove and multiple gates takes the full three days. Weather and concrete cure add time in the background. Call (844) 797-4808 and we’ll give you a real timeline for your lot, not a generic one.
A like-for-like replacement in the same location usually doesn’t require a permit; new perimeter fence on a lot that’s never had one usually does, and corner lots or lots on a public street can face additional setback rules. We handle the paperwork and tell you in writing which situation you’re in before we dig. Call us for a straight answer on your specific address.
Not on our jobs. The number in your written estimate is the number you pay, as long as the scope doesn’t change on your end. The only legitimate surprise is a buried obstacle we couldn’t see during the measure, like an old footing or a utility line in the run, and we stop and talk to you before touching it. Call (844) 797-4808 for an estimate with no change-order games.
A fence fully inside your property line is yours and simple. A fence on a shared line with a neighbor is a conversation, not a construction problem; we’ll measure and sign off on the line with you before we set a single post so there’s no dispute later. We won’t build to an ambiguous line. Call us and we’ll walk it with you.
Every chain link fence we install is covered by our 730-Day Done Right Promise: if a post shifts, a gate drops, or the workmanship fails inside that window, we make it right. That’s one of the longest workmanship guarantees in the residential construction space. Call (844) 797-4808 to schedule your free on-site estimate.
Get a Free Chain Link Fence Estimate in Duncanville
We’ll walk your property line, measure the actual footage, and hand you a written line-item quote for your chain link fence in Duncanville, free. No pressure, no vague ranges. Call (844) 797-4808 and a live person answers, day or night. We’ll book a time that works, and you’ll have a real number in hand the same visit.
Written by the team at Groundwork Construction Co.