Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Carrollton, TX: Cost, Timeline, and What Your HOA Will Approve
Walk-In Showers & Shower Remodeling in Carrollton runs $9,000 – $28,000 for a full shower rebuild, and most jobs land between $4,500 and $12,000 if you’re only replacing the shower itself without touching the rest of the bathroom. Plan on two to four weeks from demo to final inspection. Call (844) 797-4808 and a live person answers, day or night, to set up your free on-site estimate.
What separates a Carrollton shower project from the same job in a newer suburb is the approval layer on top of the construction. Many of the planned-unit developments and older subdivisions here run active HOAs with architectural review boards, and a shower rebuild that changes a window, adds a vent, or alters exterior plumbing can trigger a review before a single tile comes down. We build the review into the schedule instead of discovering it on day three.
How we sequence a walk-in shower build in Carrollton
Five stages, and you make one real decision at each. Here’s the honest version, not the brochure one.
Stage 1: on-site measure and HOA review (days 1 – 5)
We measure the existing pan, check the valve rough-in, and photograph the framing behind the wall if the substrate is already open. In the same visit we ask for your HOA’s architectural guidelines or design standards document. If your community requires an ARB application for bathroom work, we prepare the drawings and product spec sheets so the request goes in correctly the first time. Approval timelines vary by association, so this stage can be as quick as a few days or stretch longer if a board meets monthly. You decide the shower footprint and the door style here, because both usually appear on the application.
Stage 2: demo and substrate inspection (days 6 – 8)
The old tile, pan, and backer board come out, and this is where Carrollton surprises live. In the 1970s – 80s homes off Josey Lane and Belt Line Road we routinely find aluminum branch wiring and polybutylene supply lines behind the shower wall. Both are common enough that we plan for a contingency. If the shower valve or the branch circuit needs to be brought up to current code before the new work passes inspection, that decision gets made now, in writing, before we close anything back up.
Stage 3: rough-in, waterproofing, and inspection (days 9 – 12)
New valve, drain relocation if needed, wall blocking, then the waterproofing system: cement backer board plus a bonded membrane or a foam board system, depending on what you chose. This is the stage that decides whether the shower lasts twenty years or leaks in three. We schedule the rough plumbing inspection before tile goes on, because opening a finished wall to fix a rough-in mistake costs far more than the inspection does. You confirm tile layout and grout color during this window.
Stage 4: tile, glass, and trim (days 13 – 20)
Panset, wall tile, niche, bench, then grout and sealant. Frameless glass gets templated only after the tile is fully cured, which means a short gap between tile completion and glass installation. That gap is one of the most common reasons a shower job runs long with contractors who don’t schedule for it. You choose the glass hardware finish and the door swing here.
Stage 5: final inspection and walkthrough (days 21 – 28)
Final plumbing and electrical inspection, then a walkthrough with you: valve operation, drain flow, caulk lines, and a straightforward explanation of how to maintain the waterproofing. The work is covered by our 730-Day Done Right Promise, so if something isn’t right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
A walk-in shower is a small build with a surprisingly large decision tree. Here’s what matters and what each choice really costs you.
- Tile versus solid-surface walls. Porcelain tile gives you the widest design range and holds up for decades, but grout lines need sealing and cleaning. Large-format slabs cut cleaning significantly. Acrylic or solid-surface surrounds cost less and install fast, but they read as builder-grade next to tile and can’t be repaired invisibly if chipped.
- Linear drain versus center drain. A linear drain lets you use larger tiles with fewer slope cuts and looks cleaner, but adds cost for the drain body and more careful waterproofing. A center drain is cheaper and proven; it also needs a consistent slope that some tile sizes make awkward.
- Curbless versus low-curb. Curbless requires either recessing the floor framing or building up the surrounding floor, which is where structural work enters the budget. Worth it for aging-in-place and wheelchair access. A low curb gets you most of the look without the framing work.
- Frameless versus semi-frameless glass. Frameless glass in 3/8-inch or 1/2-inch thickness is the standard for a true walk-in look. Semi-frameless costs less and still looks sharp, but the frame collects soap film and stains over time.
- Bench, niche, and grab bars. A built-in bench, a recessed niche, and blocking for grab bars add a modest amount each but are far cheaper to do during the build than to retrofit later.
- Ventilation. A properly sized exhaust fan is not optional in a North Texas bathroom. If your current fan is undersized or vented into the attic, we correct that during the rebuild.
On the fixture side, Kohler is what we most often spec for valves and trim because parts availability in Carrollton is good and the warranty support is real. Glass hardware comes from the same networks we use for windows and door systems, where Andersen and Marvin have earned their reputation on fit and finish.
What Walk-In Showers & Shower Remodeling costs in Carrollton, TX
Walk-In Shower Installation in Carrollton runs $4,500 – $12,000. A full shower replacement runs $3,000 – $8,500, and a tub-to-shower conversion runs $3,500 – $10,000. When the shower is part of a wider rebuild, the full Bathroom Remodel range for Carrollton is $9,000 – $28,000, and that’s the number most walk-in shower buyers here actually land in once the rest of the room gets caught up in the scope.
| Scope | Carrollton price range |
|---|---|
| Shower replacement only (like-for-like) | $3,000 – $8,500 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Walk-in shower as part of full bathroom rebuild | $9,000 – $28,000 |
What pushes a Carrollton shower job toward the high end
- Plumbing relocation. Moving the drain or valve means cutting framing and re-running pipe. Curbless builds often require recessing the subfloor, which is structural work and a bigger permit scope.
- Existing condition. Original cast-iron drain lines, polybutylene supply lines, or aluminum branch wiring found during demo turn a shower job into a code-correction job. We quote the contingency in writing rather than surprising you mid-build.
- Material grade. A $4,500 shower with acrylic walls and a framed door and a $12,000 shower with large-format porcelain, a frameless glass panel, a linear drain, and a bench are both legitimate. The difference is material and labor, not honesty.
- Permit scope. A shower that involves plumbing or electrical changes needs a permit and inspection. That cost is real, and it’s included in our written estimate, not added later.
- HOA-driven design constraints. Approved color palettes and exterior-visible elements can narrow your material choices, occasionally toward more expensive options that fit the design standards.
Every estimate we write is line-item and upfront: the number you see is the number you pay. Projects over $10,000 qualify for $1,000 off, and we offer 0% financing for 18 months.
See the difference
Before
After
Before
After
Before
AfterWhat Carrollton homes specifically do to a shower remodel
Carrollton’s older subdivisions, especially around the 75006 and 75007 ZIP codes, are in the middle of a slow rebuild cycle. Lot values now exceed the aging ranch homes sitting on them, so more homeowners here are doing major remodel work instead of greenfield building. That colors what we find behind the shower wall. Original cast-iron drain lines and polybutylene supply lines are common in the 1970s and 1980s homes, and both have to be addressed before the new shower closes up. North Texas expansive clay soils add a second problem: slab movement cracks tile and stresses shower pans over time, so a walk-in shower that was tight twenty years ago may have a pan that’s already failing. Freeze events like 2021 pushed some of these failures along, and we still see the resulting pipe-burst repair work showing up in shower remodels today. Add mature HOA deed restrictions in the planned-unit developments, and the design conversation starts with the standards document, not the tile showroom.
We work across all of Carrollton, including the 75010 and 75011 ZIP codes, and our bathroom remodeling service covers the wider scope when a shower is part of a full Bathroom Remodeling in Carrollton project. Homeowners often pair a shower rebuild with exterior work, and we handle Roof Replacement & Installation in Carrollton and Metal Roofing in Carrollton on the same visit if the timing works. Our technicians have up to 12 years of experience, and every tech is background-checked and arrives in uniform.
Serving Carrollton, TX – Our Local Coverage Area
We serve Carrollton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Walk-In Showers & Shower Remodeling in Carrollton
Most Carrollton walk-in shower builds take two to four weeks from demo to final inspection. The biggest variable is HOA architectural review timing and the gap between tile cure and glass templating. Call (844) 797-4808 for a schedule specific to your home.
Yes, if you’re changing plumbing, electrical, or the shower’s structural footprint, a permit and inspection are required. A pure like-for-like surface replacement may not need one. We pull the permits and schedule the inspections, and we tell you upfront which category your job falls into. Call (844) 797-4808 and we’ll walk through it.
Usually, yes, but it often requires recessing the subfloor or building up the surrounding floor, which is structural work. If the existing drain location stays put, the plumbing scope stays small. We confirm that on site before any numbers are finalized.
A shower installation runs $4,500 – $12,000, a replacement runs $3,000 – $8,500, and a full bathroom rebuild that includes a walk-in shower runs $9,000 – $28,000. Material grade and plumbing changes are the two biggest swing factors. Call (844) 797-4808 for an exact quote; estimates are free.
Every walk-in shower we build is covered by the 730-Day Done Right Promise: if it isn’t done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. Call (844) 797-4808 to schedule your free estimate.
Get a free Walk-In Shower estimate in Carrollton
We’ll come out, measure the existing shower, review your HOA’s design standards, and give you a written line-item estimate at no cost. You’ll know the permit scope, the material options, and the total before you commit to anything. Call (844) 797-4808 and a live person will answer and get you on the schedule. Projects over $10,000 get $1,000 off, and 0% financing for 18 months is available.
Written by the team at Groundwork Construction Co.