A Groundwork company - serving Dallas, TX
Iron Fence in Carrollton, TX | Groundwork Construction Co. of Dallas

Iron Fence in Carrollton - Free Quote, Property Line & Permit Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Iron Fence in Carrollton, TX: What the Job Really Involves

A wrought iron fence in Carrollton typically runs $3,500 – $9,000, and most residential jobs take two to four weeks from signed contract to final inspection because of the fabrication lead time. The work itself is fast: a two- to three-day install once the panels arrive. What slows iron projects down is never the crew, it’s the approval chain: HOA architectural review in Carrollton’s planned-unit developments, plus a city permit when the fence sits on a platted property line. Call (844) 797-4808 and we’ll walk your lot, check your deed restrictions, and put a written number in front of you.

Call (844) 797-4808

The Process, Stage by Stage: How an Iron Fence Goes In

We don’t hand off iron fence work to whoever’s free that week. Here’s the actual sequence, and what you’ll be deciding at each point.

Day 1: site walk and compliance check. We measure the run, mark the property lines against your plat, and pull your HOA’s architectural guidelines if you’re in a deed-restricted community. That last step matters more than most homeowners expect. Carrollton has a large stock of planned-unit developments, and many of them specify approved fence heights (commonly 4 to 6 feet, front versus side), approved colors (black, bronze, sometimes a specific dark green), and picket spacing. We photograph existing fences in your section so the new one matches the community standard, not the catalog. You’ll decide the height and whether gates need to swing in or out.

Days 2 – 4: ARB submission and permitting. If your HOA has an architectural review board, we prepare the submittal package: a scaled site drawing, a fence elevation, material and finish samples, and the installer’s documentation. This is where iron fence projects die when the homeowner skips it: a fence built before approval can be ordered removed at the homeowner’s cost. In parallel, we check whether your property needs a city fence permit. Carrollton permits fences over a certain height and any fence on a platted property line in some cases; we confirm against current city requirements before we touch a shovel. You’ll sign the submittal and the contract at this stage.

Weeks 2 – 3: fabrication. Iron panels and posts are cut, welded, and powder-coated to your approved finish. This is the long pole. Aluminum and steel fabricators in the Dallas market book several weeks out, and a custom gate adds time. You’ll confirm gate hardware, hinge style, and any decorative picket or finial choices during this window.

Install days: layout, set, and hang. We set posts in concrete footings (most residential iron runs use 18- to 24-inch footings, deeper on gate posts), string the line, and mount panels level to a consistent top rail. Gates get hung and adjusted so they latch with a light push. If any existing fence or hedge comes out first, that demo happens on install day, not before, so your yard isn’t open for weeks.

Final walk and punch list. We walk the run with you, check gate swing, touch up any field-welded or scratched finish, and hand over the care sheet. Any punch items get scheduled, not shrugged at. Under our 730-Day Done Right Promise, if something isn’t right, we make it right.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Options You’ll Choose Between on an Iron Fence

Iron fence covers a wider spread than most people realize. The material grade is the biggest lever on price, and it’s also the biggest lever on how the fence looks in ten years.

  • Wrought iron (solid steel): The heaviest, most traditional option. Heavier gauge, forged or welded, and it takes a powder-coat finish beautifully. Costs the most and lasts the longest. Pairs well with custom gates and matching decorative elements.
  • Steel ornamental fence: An economical middle path. Still steel, often hollow-section, powder-coated, and it looks close to wrought iron from ten feet away. A good fit for long perimeter runs where you want the iron look without the wrought-iron line item.
  • Aluminum ornamental fence: The lightest and lowest-maintenance. It doesn’t rust, and it’s easy to carry and install. It also dents and bends more readily than steel, so it’s less suitable for high-traffic corners or where kids and dogs lean on gates. If you’re weighing aluminum against steel, that durability gap is the real decision.
  • Finish and color: Black is the default and the safest bet for HOA approval. Bronze, dark green, and custom colors are available; check your ARB’s approved palette first, because a color the community hasn’t seen can trigger a rejection even on a well-built fence.
  • Gates: A single walk gate, a double drive gate, or a self-closing gate for a pool perimeter. Gate posts need deeper footings and heavier hinges; a gate hanging off an under-set post will sag within a season.

On matching existing work, a surprising number of Carrollton iron jobs are repairs or extensions of fences already in place. We can match picket spacing, height, and color closely, though a perfect match is easier on a fence that’s a few years old than one that’s weathered a decade of Texas sun.

What an Iron Fence Costs in Carrollton, TX

Plan on $3,500 – $9,000 for a residential iron fence in Carrollton. That range covers most runs; the variables below decide where your job lands.

  • Linear feet. The single biggest driver. A typical residential perimeter runs 150 to 300 feet; a short front-yard run lands at the bottom, a full-lot perimeter at the top.
  • Material grade. Aluminum ornamental sits at the low end; steel ornamental in the middle; wrought iron at the top. The spread between them on a 200-foot run is significant.
  • Gates. Each gate adds material, heavier posts, and more labor. A double drive gate costs meaningfully more than a walk gate.
  • Terrain and existing conditions. Sloped runs, existing concrete or tree roots to cut through, and old fence removal all add time and money. North Texas clay moves, and a run that needs stepped footing work costs more than one on flat ground.
  • Permits and HOA submission. City permit fees and any ARB review costs get itemized in the estimate, not buried.

What’s included in our written estimate: materials, fabrication, footings and concrete, installation labor, gate hanging and adjustment, permit fees where required, and cleanup. What’s typically not included unless we quote it separately: old fence demolition and haul-off, landscaping repair around footings, and any electrical or low-voltage work for an automatic gate operator. The number you see is the number you pay; no change orders once the panels are on the truck unless you add scope.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Carrollton Homes Do to This Job

In the 75006 and 75007 ZIP codes, much of the housing stock is 1970s – 80s brick-veneer ranch on small lots. That combination drives iron fence work here in a specific way. Small lots mean fences share property lines with neighbors on all sides, so surveys and encroachment questions come up more often. Mature lots mean root systems and established concrete edging in the fence line, which adds prep and footing work. And the older subdivisions off Josey Lane and Belt Line Road usually carry deed restrictions that date back to when the community was platted, which is why we pull the actual recorded covenants before we design a fence. A fence style that was fine in a 1990s infill neighborhood on the north side can be a violation in a 1970s PUD two miles away.

Expansive clay soil is the other local constant. Posts set too shallow heave and lean over the first few summers. We set deeper footings and give them proper cure time, which is why we don’t rush a run in a day. If your lot is in one of the newer infill subdivisions, the soil and lot geometry are less of an issue, but the HOA restrictions are often stricter. Either way, the approval work happens before the build.

Serving Carrollton, TX – Our Local Coverage Area

We serve Carrollton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked: Iron Fence in Carrollton

Free On-Site Estimate for Your Iron Fence in Carrollton

Call (844) 797-4808 and a live person picks up, any hour. We’ll schedule a free on-site estimate, walk your lot with you, pull your HOA guidelines and plat, and give you a written, line-item price within a few days. No pressure, no vague bids. If your fence is part of a full yard project, homeowners often pair this with Patios, Walkways & Pool Decks in Carrollton or an ADU Design & Permitting in Carrollton to handle approval once. We cover all of Carrollton, and you can see the full scope of our Fence Installation work or read the Fence Installation in Carrollton overview. No-hassle upfront pricing, no surprises.

Written by the team at Groundwork Construction Co.

Why Carrollton Chooses Groundwork Construction Co. of Dallas

We set the standard for iron fence in Carrollton.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Carrollton

Getting your iron fence project started is simple.

1

Call or Request a Free Estimate

Tell us about your iron fence project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local iron fence pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Carrollton Customers Say

Trusted by homeowners across Carrollton and surrounding areas.

★★★★★

"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."

Craig Whitaker
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett

Ready for Iron Fence in Carrollton?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Carrollton.

(844) 797-4808

Request a Free Estimate in Carrollton

Tell us about your iron fence needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - 24/7 Dispatch