Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Cedar Hill, TX: What It Costs and How Long It Takes
A chain link fence in Cedar Hill typically runs $3,500 to $9,000 installed, and most residential yards are finished in one to three days once materials land. The job covers layout, utility locates, post holes set in concrete, framework, mesh, and gate hardware. The variables that move the number are linear feet, terrain, soil, and the grade of the system you pick. Call (844) 797-4808 for a free on-site estimate.
From Layout to Last Tension Band: How a Chain Link Fence Goes In
We run this job in five stages. Here’s what actually happens, and where you make decisions.
Stage 1 – Walkthrough and layout (day 1, 45 to 90 minutes). We walk the property line with you, mark corners and gate locations, and confirm whether the fence follows an existing boundary or a survey. You decide gate width and swing direction here. On sloped lots, this is also where we flag where the fence will rack to follow the grade instead of stepping.
Stage 2 – Utility locates and permits (day 1 to day 3). Texas law requires a call to 811 before digging, and we wait for locates to clear before a shovel hits the ground. If your Cedar Hill property needs a permit, we pull it now. You sign off on the final layout before we proceed.
Stage 3 – Demo and post setting (day 1 to 2 of build). If an old fence comes out, it goes first. Terminal posts (corners, ends, gates) get set in concrete and need to cure before the mesh goes up. Line posts go in faster. On the west side near Joe Pool Lake, holes often hit limestone within a few feet, which means rock saws and more time per hole.
Stage 4 – Framework and mesh (day 2 to 3). Top rail, tension bands, and mesh go up. We stretch the fabric, set the gate hardware, and check that everything lines up.
Stage 5 – Walkthrough and cleanup (same day as finish). We walk the finished fence with you, check gate swing and latch, and haul off old material and debris.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Specs You’ll Actually Choose Between
Chain link isn’t one product. These are the choices that matter:
- Gauge and coating. 11.5-gauge wire is the standard residential choice; 9-gauge is heavier and holds up better to pets and kids. Galvanized holds up fine; vinyl-coated (usually in black or green) costs more but looks softer and hides rust longer.
- Post size and wall thickness. 1⅝” line posts and 2⅜” terminal posts are standard. Thicker walls cost more but resist bending.
- Height. 4 ft is fine for a garden boundary, 5 ft is the common residential choice, and 6 ft makes sense if you have dogs or want more screening.
- Gates. Walk gates (3 to 4 ft) and drive gates (10 to 12 ft) are the two standards. Double drive gates need heavier posts and hinges.
- Top rail and tension wire. A top rail is standard. Tension wire at the bottom keeps the fabric tight and helps with digging pets.
What a Chain Link Fence Costs in Cedar Hill, TX
Residential chain link in Cedar Hill runs $3,500 to $9,000. Here’s the breakdown:
| Item | Typical Range |
|---|---|
| Basic 4 ft galvanized, 100 to 150 linear ft | $3,500 – $5,000 |
| 5 to 6 ft galvanized with top rail and walk gate | $5,000 – $7,000 |
| Vinyl-coated or 9-gauge, 6 ft, with drive gate | $6,500 – $9,000 |
| Old fence removal and haul-away | $400 – $900 |
What pushes you to the high end: rocky ground that needs rock saws, sloped lots that need extra posts, long runs, drive gates, and vinyl coating. What keeps you at the low end: flat grade, straight runs, a single walk gate, and standard 4 to 5 ft galvanized. A written estimate lists posts, mesh, gates, concrete, and removal separately. What it typically doesn’t include: stump grinding, retaining wall work, or a survey. Call (844) 797-4808 for a line-item quote.
See the difference
Before
After
Before
After
Before
AfterWhat Cedar Hill’s Terrain and Trees Do to This Job
Cedar Hill is hilly and heavily treed, which changes the fence job directly. On sloped lots the fence has to follow the grade; we rack the panels along the slope instead of stepping them, which means more posts per run. On the west side near Joe Pool Lake, holes often hit limestone within a few feet, so we bring rock saws and plan for slower post setting. On east-side lots with mature oaks, we work around tree protection requirements and route the fence line to avoid root zones. Expansive clay soils across the area shift with the seasons, so we set terminal posts deep enough to stay put through North Texas wet-and-dry cycles. Homes in subdivisions off Belt Line and Wintergreen and in the older ranch homes closer to the original townsite all present the same thing: grade changes from lot to lot that most builders don’t plan for. Chain link is a good fit here when it’s set right.
Serving Cedar Hill, TX – Our Local Coverage Area
We serve Cedar Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Cedar Hill
Most residential chain link fences are finished in one to three days once materials arrive. Utility locates can add a day or two, and limestone or heavy slope adds time per post. Call (844) 797-4808 for a realistic schedule for your yard.
It depends on height and location. Fences under a certain height and outside of easements often don’t require a permit; taller fences or those near a property line may. We check the requirement for your specific property and pull any permit needed. Call (844) 797-4808 and we’ll walk you through it.
Yes, in most cases. Chain link is a post-and-mesh system, so nothing gets moved except what’s in the fence line itself: a tree, a small shrub, maybe a short run of old fence. If a line crosses a utility or a drainage swale, we route around it, not through it. Anything structural gets flagged during the walkthrough.
Not on our jobs. The number on the written estimate is the number you pay. If we hit rock, that was already accounted for in the estimate or we discuss it before we start digging. Upfront pricing, no surprises. Call (844) 797-4808.
Every Groundwork chain link fence is covered by our 730-Day Done Right Promise. If something isn’t done right, we make it right. Call (844) 797-4808 to schedule your free estimate.
Get a Free Chain Link Fence Estimate in Cedar Hill
Call (844) 797-4808 to schedule a free on-site estimate for chain link fence in Cedar Hill. We’ll walk the property line with you, flag the rock, slope, and tree issues that affect the price, and put a written line-item quote in your hands. No surprises on the number. We serve all of Cedar Hill, and homeowners often pair this with Concrete Driveways & Concrete Work in Cedar Hill or a fresh Asphalt Driveways & Resurfacing in Cedar Hill job to finish the exterior all at once. If the chain link is part of a bigger plan, see our Fence Installation service or read about Fence Installation in Cedar Hill for the wider scope. We have used quality materials from brands like Oldcastle and Quikrete on past jobs. Every fence is backed by our 730-Day Done Right Promise. Call today.
Written by the team at Groundwork Construction Co.