Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Cedar Hill, TX: What It Costs and How Long It Takes
Backsplash, tile and flooring work in Cedar Hill typically runs $14,000 – $45,000 when you’re redoing kitchen tile, backsplash and floor together as one project, and most jobs finish in 1 – 3 weeks depending on square footage and how much demo the old surface needs. Backsplash alone is the smallest slice at $800 – $2,500. Call (844) 797-4808 for a free on-site estimate; we write the number down line by line before anyone touches a tile saw.
How the Job Actually Runs, Stage by Stage
Tile work is mostly prep. The visible part goes fast once the substrate is flat, clean and ready. Here’s the real sequence we follow on a Cedar Hill kitchen floor and backsplash job, with what you decide and when.
Stage 1: Measure, moisture check, material selection (day 1, about 90 minutes)
We measure every run, check the subfloor for deflection and moisture, and pull a straightedge across the walls your backsplash will sit against. On older ranch homes in the original townsite, that straightedge tells us fast whether the wall needs float work before tile goes up. You pick tile format, grout color and trim at this visit, because lead times on special-order tile run 1 – 2 weeks.
Stage 2: Demo and substrate prep (1 – 2 days)
Old flooring comes up, adhesive gets ground off, and we set backer board or pour self-leveling underlayment where the floor is out of plane. Cabinets stay put. We protect countertops and appliances, and we run dust control because Cedar Hill summers make an open-window job miserable otherwise.
Stage 3: Layout and dry-fit (half a day)
This is the decision point most homeowners underestimate. We snap the layout, dry-fit tile and show you where cut tiles land. You approve the starting point, the grout joint width and the pattern direction before anything is bonded. Changing layout after thinset sets means starting over.
Stage 4: Setting tile and backsplash (2 – 4 days)
Floor tile goes down first, then backsplash. Large-format floor tile needs a longer cure before grout than a 12×24 backsplash run. We cut around outlets, set the countertop-to-backsplash caulk joint, and keep traffic off the floor for 24 hours.
Stage 5: Grout, seal, walkthrough (1 day)
Grout, cure, seal on natural stone, then a walkthrough where we check lippage, grout lines and caulk joints with you present. Touch-ups happen before we leave, not on a callback. The whole thing is covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the budget swings here. Here’s what we actually put in front of Cedar Hill homeowners, with the honest trade-off on each.
- Porcelain vs. ceramic floor tile. Porcelain runs denser and handles moisture better; ceramic costs less and works fine in a dry kitchen. Porcelain is worth the upgrade over a slab-on-grade floor.
- Large-format vs. standard tile. 24×24 or larger means fewer grout lines and a cleaner look, but it demands a flatter substrate, so prep cost climbs. Standard 12×24 is more forgiving on uneven floors.
- Ceramic vs. glass vs. stone backsplash. Ceramic subway is the value pick at the low end of the $800 – $2,500 range. Glass reads brighter under cabinet lighting. Natural stone needs sealing and adds cost.
- Luxury vinyl plank vs. tile. LVP goes down faster and warmer underfoot, but tile holds up better near a dishwasher or sink where water sits.
- Grout and trim. Epoxy grout resists staining in a busy kitchen; cement grout is cheaper but needs sealing. Schluter-style trim edges finish a backsplash cleanly at the countertop.
What Backsplash, Tile & Flooring Costs in Cedar Hill, TX
A full kitchen floor and backsplash package lands between $14,000 and $45,000 in Cedar Hill, and backsplash installation on its own is $800 – $2,500. Those are our standing ranges, and the number you see on the written estimate is the number you pay.
| Line item | Typical range |
|---|---|
| Backsplash installation | $800 – $2,500 |
| Full kitchen remodel (when tile is part of a larger scope) | $14,000 – $45,000 |
| Countertop installation (if you’re pairing it) | $2,000 – $6,500 |
Five things push a job from the low end to the high end:
- Square footage and layout complexity. A galley kitchen with straight runs sits low; an L-shape with an island and diagonal layout sits high.
- Condition of what’s underneath. Cracked slab, old vinyl adhesive or out-of-plane walls all add prep days.
- Moving plumbing or electrical. Relocating a sink or adding outlets behind a backsplash adds trades and inspection time.
- Material grade. Porcelain and natural stone cost more per square foot than ceramic, and specialty formats add cutting time.
- Structure. On Cedar Hill’s sloped lots, floor leveling over a shifting foundation can add real cost before tile ever goes down.
A written estimate covers demo, substrate prep, tile setting, grout, seal and cleanup. It typically excludes structural foundation repair and any plumbing or electrical rough-in beyond simple outlet cutouts; those get quoted separately so nothing is buried in a lump sum.
See the difference
Before
After
Before
After
Before
AfterWhat Cedar Hill Homes Specifically Do to This Job
Cedar Hill’s terrain is the story here. Because so much of the city is hilly and tree-covered, floors inside older homes are rarely dead flat, and that shows up the second you lay a level on them. Subdivisions off Belt Line and Wintergreen hold a lot of 1980s – 2000s single-family stock, and the original townsite’s ranch homes are older still. On the west side near Joe Pool Lake, builders hit limestone within a few feet, which matters when a tile job turns into a slab repair. East-side lots under mature oaks mean tree-protection plans before any excavation, so we sequence outdoor cutting to protect roots.
North Texas heat and expansive clay soils shift seasonally. That moves foundations, which cracks tile and opens grout lines over time. We schedule larger tile projects in spring or fall when curing conditions are steadier, and we run dust control through summer jobs. When a floor keeps cracking, the honest answer is often that the slab moved first, and that’s a conversation we have before we quote tile.
Serving Cedar Hill, TX – Our Local Coverage Area
We serve Cedar Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Backsplash, Tile & Flooring in Cedar Hill
Most jobs run 1 – 3 weeks from demo to walkthrough, with backsplash-only work done in 1 – 2 days. Special-order tile adds 1 – 2 weeks of lead time before we start. Call (844) 797-4808 and we’ll give you a real schedule for your kitchen.
Cosmetic tile replacement usually doesn’t require a permit, but moving plumbing, electrical or structure does. We tell you up front which side of that line your job falls on and pull what’s needed. Call (844) 797-4808 for a straight answer on your scope.
Yes, and most backsplash jobs run exactly that way: cabinets and countertops stay, only the wall surface changes. Outlets get cut around the tile. If a sink relocation is on your list, we quote that separately. Call (844) 797-4808 for an estimate.
Backsplash alone runs $800 – $2,500, and a combined kitchen floor and backsplash package runs $14,000 – $45,000. Prep condition and material grade drive most of the difference. Call (844) 797-4808 for an exact quote, and estimates are free.
Every tile job is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship on setting, grout and caulk. Call (844) 797-4808 to schedule your free estimate.
Ready to Price Your Cedar Hill Tile Project?
Call (844) 797-4808 for a free on-site estimate on Backsplash, Tile & Flooring in Cedar Hill. We’ll measure, check what’s under the old surface and hand you a line-item quote before any work starts. This pairs naturally with a Kitchen Remodeling in Cedar Hill scope, or with a Tub-to-Shower Conversion in Cedar Hill if the bathroom is next on your list.
If the tile is one piece of a larger plan, see our Kitchen Remodeling service and the local Cedar Hill service area for the full picture. Homeowners often pair this with Vanities, Tile & Fixtures in Cedar Hill to finish both rooms in one stretch.
What happens on the call: we ask about the room, the tile you’re considering and target timing, then book the estimate. Live people answer 24/7, and every technician who shows up is background-checked and in uniform. Finishing choices can include CGI and CWS tile lines from our verified partners.
Written by the team at Groundwork Construction Co.