Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Duncanville, TX: What the Job Actually Costs and How Long It Takes
Cabinets and countertops in Duncanville usually run $14,000 – $45,000 for a full kitchen’s worth of both, and a typical project takes three to five weeks from demo to final caulk once materials are on site. Cabinet installation alone lands between $4,000 and $13,000, countertop installation between $2,000 and $6,500. Most Duncanville homes we walk are 1950s – 1970s brick ranches, so the wildcard is rarely the cabinets themselves, it’s what’s behind the old ones. Call (844) 797-4808 to schedule a free on-site estimate.
How a cabinets and countertops job goes, stage by stage
We don’t hand you a schedule and disappear. Here is the actual sequence, with the decisions you’ll be making and when.
Stage 1: In-home measure and layout (day 1, about 90 minutes)
We template the existing footprint, check wall plumb and floor level, and note where the old cabinets meet the slab. In Duncanville’s older ranches, out-of-square walls are the norm, so we plan filler strips and scribe molding up front. You pick the door style and cabinet line here, or we bring samples to you. This is also when we flag anything that needs a plumber or electrician before cabinets land.
Stage 2: Demo and prep (days 2 – 3)
Old cabinets come out, and that’s when we see the truth: water damage at the sink base, failed shutoffs, sometimes a wall that isn’t where the drawing said. We patch drywall, address any soft subfloor, and confirm the electrical and plumbing rough-in locations match the new cabinet plan. You approve any change order in writing before we go further. No surprises later.
Stage 3: Cabinet install (days 4 – 5)
Base and wall cabinets set level and shimmed, crowns and light rail fitted, doors and drawers aligned. A typical Duncanville kitchen runs 20 – 30 linear feet of cabinetry. We don’t rush this stage; a cabinet box set a quarter-inch out of level telegraphs through every drawer for the life of the kitchen.
Stage 4: Countertop template and fabrication (days 6 – 12, off-site)
Once cabinets are locked in, the countertop gets templated. Fabrication for quartz or granite usually takes 5 – 7 business days. This is the waiting gap homeowners don’t expect, and it’s unavoidable with stone. Laminate and butcher block move faster. You choose edge profile and sink cutout before the slab is cut.
Stage 5: Countertop set, sink, and final walkthrough (days 13 – 15)
Countertops go in, the undermount sink and faucet (a Moen or Delta pull-down is what most Duncanville clients pick) get set, and we do a final alignment and cleanup pass. You walk the job with us and sign off. If something’s off, it gets fixed before we call it done, and it’s covered under our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll be choosing between
Nobody picks cabinets and countertops in a vacuum, and the trade-offs matter more than the showroom lighting suggests.
- Stock vs. semi-custom cabinets: Stock runs $4,000 – $7,000 for a mid-size Duncanville kitchen and ships fast but forces you into standard sizes. Semi-custom adds $3,000 – $6,000 and buys you the odd widths older kitchens always need. KraftMaid sits in that semi-custom tier and is what we specify most.
- Quartz vs. granite: Quartz (Cambria, among others) is non-porous, needs no sealing, and holds up to the Texas heat gain near windows. Granite is cheaper per square foot and more forgiving of hot pans, but it needs resealing every 1 – 2 years.
- Laminate: Still a real option at the budget end, $2,000 – $3,500 installed. Honest trade-off: it’s fine for a rental or a starter budget, but edges and seams show wear faster in a busy household.
- Butcher block: Warm, affordable, and repairable by sanding. It needs oiling and doesn’t love a wet sink zone.
- Full overlay vs. inset doors: Full overlay is standard and cheaper. Inset reads more custom and costs 15 – 25% more for the tighter tolerances.
- Faucets and sinks: A Blanco undermount sink with a Delta or Moen faucet is the combination we install most. Skip the bargain-basement faucet; it’s the part that fails first.
What cabinets and countertops cost in Duncanville, TX
Here’s the line-item breakdown, so you can see where the number comes from.
| Item | Typical range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash | $800 – $2,500 |
| Kitchen island | $3,000 – $10,000 |
| Full cabinets & countertops project | $14,000 – $45,000 |
The variables that push a job toward the high end: kitchen size and cabinet run length, whether walls or floors need repair once the old boxes come out, moving a sink or range (which means plumbing and electrical), the cabinet line and door style you choose, and material grade (laminate to quartz). Foundation remediation, if the slab has heaved, gets priced before interior work begins and sits outside the cabinet number entirely.
A written estimate covers demo, cabinet and countertop material and install, sink and faucet set, and cleanup. It doesn’t cover structural repairs discovered mid-demo, appliance relocations, or a panel upgrade, and we say so up front. Our pricing is upfront with no change orders once the number is signed. Ask about the $1,000 off on projects over $10,000 and 0% financing for 18 months.
See the difference
Before
After
Before
After
Before
AfterWhat Duncanville homes specifically do to this job
Duncanville is a built-out, largely post-war bedroom city in southwest Dallas County, so nearly all the work here is renovation on 1950s – 1970s single-family homes, not new construction. That shapes this job directly. When we pull old cabinets in a ranch off Cedar Ridge Drive or near Danieldale Road, we’re working against an aging slab, cast-iron or early PVC drains, and original electrical panels that fall under modern permitting scrutiny. We pull the permits and plan for inspection. The black clay soil across Duncanville heaves and shrinks with wet-dry cycles, so a floor that looked level can shift a quarter-inch after a wet spring; we check for that before setting cabinets. The long, hot summers also drive ventilation upgrades during a remodel, which changes where upper cabinets can go. If your project grows into a full scope, that’s covered on our Kitchen Remodeling in Duncanville page; for the wider service, see Kitchen Remodeling, and we also service the surrounding areas on our Duncanville page. Homeowners often pair this with Walk-In Showers & Shower Remodeling in Duncanville or a Tub-to-Shower Conversion in Duncanville while the trades are already on site.
Serving Duncanville, TX – Our Local Coverage Area
We serve Duncanville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – cabinets and countertops in Duncanville
Three to five weeks from demo to finish, most of it the countertop fabrication wait. Cabininet install itself is two days; stone countertops template after cabinets and take 5 – 7 days to fabricate. Call (844) 797-4808 for a schedule specific to your kitchen.
Straight cabinet and countertop swaps typically don’t require a permit, but any plumbing or electrical relocation does, and older Duncanville homes often trigger panel scrutiny. We pull the permits and handle inspections. Call (844) 797-4808 to confirm your scope.
Yes, and that’s the majority of what we do: same footprint, new doors and drawers, new counters. Keeping the sink and range where they are is the single biggest cost saver, dropping a project toward the $14,000 end. Call (844) 797-4808 to talk through what’s flexible.
Roughly $14,000 – $45,000 for cabinets and countertops together, with cabinet install at $4,000 – $13,000 and counters at $2,000 – $6,500. Call (844) 797-4808 for an exact quote; estimates are free.
Every cabinets and countertops project carries our 730-Day Done Right Promise: if it’s not done right, we make it right, backed in writing. Call (844) 797-4808 with questions about coverage.
Get a free cabinets and countertops estimate in Duncanville
Call (844) 797-4808 for a free on-site estimate. We walk your kitchen, measure, check the walls and slab, and put a line-item number in writing, usually within a few days. A live person answers around the clock, so you can book whenever it suits you. Then you see the price, the schedule, and the warranty, all before you commit.
Written by the team at Groundwork Construction Co.