Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Highland Park, TX: What the Job Actually Involves
Custom and geometric windows in Highland Park, TX typically run $4,500 to $15,000 for a whole-home replacement scope, with true one-off shapes and sizes pushing higher. The work starts with a template of each opening, a real lead time of six to twelve weeks for fabrication, and a two-to-four-day install once the units land. Call (844) 797-4808 and we’ll walk your house, measure every opening, and put the numbers in writing.
How a Custom & Geometric Window Project Moves, Stage by Stage
Custom window work is not a swap. The sequencing matters more than the sales pitch, and a job that skips steps shows it within a few seasons. Here’s the order we run it in Highland Park.
Day 1: walk-through and template. We measure every opening and trace the actual shape of arches, half-rounds, eyebrows, and trapezoids against the rough opening, not just the visible glass. On the 1910s – 1930s Tudors and Colonials that dominate Highland Park, that opening has usually shifted or settled since it was framed, so we check for rack and out-of-square before we send anything to fabrication. The homeowner decides here whether we’re matching the existing profile exactly or making a visible upgrade.
Days 2 – 10: engineering, spec, and order. Custom and geometric units get built to the template, which means glass type, grille pattern, exterior color, interior finish, and hardware all get locked before the order goes in. This is where the homeowner has the most decisions to make and where a wrong call costs weeks. We put those choices on paper so nothing gets assumed. Fabrication lead time on shaped units runs six to twelve weeks depending on the profile and the brand.
Mid-project: permitting and inspection. Exterior changes in Highland Park go through the Town’s own permitting and design review, not Dallas codes, so we file and schedule accordingly before demolition day. One inspection typically follows the rough opening work; final sign-off comes after trim and sealant.
Install days: demo, set, flash, finish. A whole-house scope of six to ten openings usually takes two to four days. We pull the old units, verify the rough opening, set the new frame, flash and seal, then trim out to match the home. Geometric shapes take longer per opening than rectangles because each one is set and shimmed individually.
Final walkthrough and punch. We check operation, locks, screens, and sealant lines with the homeowner present, fix anything on the spot where we can, and leave the written workmanship terms in hand. All of it sits under the 730-Day Done Right Promise: if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Every custom window job comes down to a handful of real trade-offs. Here’s what moves the outcome and what it costs you in durability or dollars.
- Wood-clad vs. vinyl vs. fiberglass frame: Wood-clad holds the historic detail that Tudor and Colonial homes in Highland Park demand and takes paint and stain well, but it costs more and wants repainting every several years. Vinyl is the value pick and fine on many openings, though it limits the shapes it can form cleanly. Fiberglass sits in the middle: stable in North Texas heat, holds up to hail-season humidity swings, and doesn’t need paint.
- Custom shapes vs. stock sizes: Stock rectangles are cheap. Arches, half-rounds, eyebrows, and trapezoids are fabricated to the template, so the price climbs with each unique shape. If a shape can be formed from a stock unit plus a trim kit, we’ll tell you – it saves real money without looking like a compromise.
- Glass package: Low-E and impact-rated glass both add cost. Impact-rated matters in North Texas hail country and pairs well with the exterior work Highland Park homeowners already schedule after storm seasons. Plain insulated glass keeps the budget down but gives up the storm protection.
- Grille pattern and finish: True divided lites cost more than simulated grilles inside an insulated unit, and the difference shows up close but not from the curb. Exterior colors run the range from stock to custom-matched, and custom-match finish adds both cost and lead time.
- Hardware and operation: Casement, awning, single-hung, and fixed units all behave differently in a shaped opening. Fixed units are cheapest and best for true ornament; operable shapes cost more and need more frequent adjustment.
Where the brands matter, we work with partners like Andersen and Marvin on the custom profiles, and Oldcastle and Sakrete come into play on the adjacent masonry and sill work that often accompanies an exterior window change.
What Custom & Geometric Windows Cost in Highland Park, TX
Expect $4,500 to $15,000 for a typical whole-home custom or geometric window scope in Highland Park, with true one-off shapes and full-house jobs landing at the top of that range or above. The number you see on the written estimate is the number you pay, and that’s the difference between a contractor who plans and one who guesses.
Five things push a job toward the low or high end:
- Number and complexity of shapes. A handful of rectangular replacements sit near the bottom. A full set of arches, eyebrows, and trapezoids pushes toward the top.
- Existing condition of the rough openings. Settled or racked openings on older Highland Park homes need framing correction before install, which adds labor.
- Material grade. Wood-clad and fiberglass sit above vinyl, and custom-matched exterior finishes add to both cost and lead time.
- Glass package. Low-E and impact-rated glass raise the unit price but pay back in comfort and storm durability.
- Permit scope. Exterior changes that touch the Town’s design review or require a street closure for a crane pick add coordination time and cost.
A written estimate itemizes each opening, the glass package, finish, and hardware, plus permit fees and any framing repair we can see at measure. What it doesn’t include is anything we can’t see until the wall opens – hidden rot or framing damage gets photographed, priced, and approved in writing before anyone touches it. No surprise line items added after the fact.
See the difference
Before
After
Before
After
Before
AfterWhat Highland Park Homes Specifically Do to This Job
Highland Park is a nearly built-out enclave of century-old homes, so custom window work here is almost always renovation inside an existing shell, never new construction. That changes the job. The Town of Highland Park runs its own permitting, design review, and lot-coverage rules rather than following Dallas codes, and exterior changes that face the street or shift a facade routinely go through local design review. Plan for arcane local approvals and the schedule that comes with them.
The housing stock is 1910s – 1930s Tudor, Colonial, and Mediterranean, most of it repeatedly expanded or torn down and rebuilt lot-line to lot-line. Matching historic detailing means matching the original grille pattern, trim profile, and brick or stucco surround, not just the glass. Work on the tight, tree-canopied lots under pecan and live oak along streets like Beverly and Euclid often means coordinating tree-protection plans and street closures for crane picks and material deliveries. And the North Texas clay underneath all of it moves, which is why so many original window openings are already out of square by the time we arrive.
If your window work is part of a full Windows & Doors in Highland Park scope, or you’re pairing it with exterior concrete like a rebuilt walkway, homeowners often pair this with Concrete Driveways & Concrete Work in Highland Park while the crew is already on site. For the broader picture of our Windows & Doors service, that page covers the full range, and we cover Highland Park end to end.
Serving Highland Park, TX – Our Local Coverage Area
We serve Highland Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Highland Park
Figure six to twelve weeks for fabrication and two to four install days, plus permitting time on top of that. The install itself is fast; the lead time on shaped units and the Town’s review process are what stretch the calendar. Call (844) 797-4808 and we’ll give you a realistic schedule for your openings.
Yes – exterior changes go through the Town of Highland Park’s own permitting and design review, not Dallas codes. We handle the filing and schedule the inspections as part of the job. Call (844) 797-4808 to talk through what your specific project needs.
In most cases, yes. Window work lives in the exterior wall, and the only time plumbing or structure comes into play is when framing is damaged or the opening itself needs correction. We check for that at measure so it doesn’t surprise you mid-job. Call (844) 797-4808 and we’ll take a look.
Plan on $4,500 to $15,000 for a typical scope, with true one-off shapes running higher. Shape count, material grade, glass package, framing condition, and permit scope are the five variables that move the number. Call (844) 797-4808 for an exact quote – estimates are free.
Every custom window install we do is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing. Call (844) 797-4808 with any warranty questions.
Get a Free Custom & Geometric Windows Estimate in Highland Park
Call (844) 797-4808 and a live person answers, day or night, to schedule a free on-site estimate for your Highland Park custom and geometric window project. We walk the house, measure every opening, talk through shapes, materials, and glass, and put a written line-item quote in your hands. No pressure, no change orders after the fact, and a $1,000 credit on projects over $10,000.
Written by the team at Groundwork Construction Co.