Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Dallas: What the Job Actually Involves
Custom & Geometric Windows in Dallas means building or fitting a non-rectangular opening – arched, round, trapezoid, angled gable, eyebrow – and the typical project runs 3 to 6 weeks from template to final trim, at $4,500 – $15,000 as a broad bracket depending on how far the geometry reaches and what frame you choose. A single arched accent window can land under $2,000; a full wall of angled trapezoids on a new build runs past $12,000. Call (844) 797-4808 for a free on-site template and estimate.
How a Custom & Geometric Window Project Runs, Stage by Stage
Geometry adds order to the job, not chaos. Here’s the sequence we follow, and what you’ll be deciding at each step.
Stage 1: Site measurement and template (day 1, 1 – 2 hours). For a rough opening in new construction, we measure plate to plate and check square against the framed wall. For an existing wall, we build a physical template from the inside face, because plaster and pier-and-beam floors rarely read as square. You decide here: inside or outside mount, and how much reveal you want around the curve.
Stage 2: Shop drawing and approval (3 – 7 business days). The manufacturer returns a drawing showing radius, radius tolerance, jamb depth, and muntin layout. This is the most important approval you’ll sign. You decide: frame material, glazing, divider grid, finish color. Nothing gets built until the drawing is signed, because a radius mistake is a $2,000 slab of glass.
Stage 3: Fabrication (10 – 18 business days). Arched and true-radius units aren’t pulled off a shelf. Lead time depends on finish and glass package; impact-rated glass and custom exterior colors push the schedule. You decide: tempered versus laminated glass, and trim or stucco return.
Stage 4: Rough opening prep and install (1 – 3 days). We verify the opening against the template, shim to the drawn centerline, set the unit, and square and plumb before any fastening. Geometry only looks right if it was perfectly level at install. You decide: interior casing profile.
Stage 5: Flashing, trim, and final walkthrough (1 – 2 days). We flash and seal the exterior, install interior trim, hang the operable sash if the unit has one, and walk the finished window with you against the shop drawing.
This is part of a full Windows & Doors in Dallas scope if you’re also replacing the standard rectangular units on the same wall.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
- Wood frame (pine or oak). Accepts paint and stain beautifully and is the historic detail default in Oak Cliff bungalows. It needs repainting or sealing every 5 – 7 years against Dallas sun. Premium end of the range.
- Clad wood. Wood interior, aluminum exterior. Best of both worlds and the most popular choice for arched accents on brick homes. Roughly $300 – $700 more per unit than solid wood.
- Fiberglass. Takes heat and moisture without warping. A good fit for a workshop or detached garage where the building swings.
- Vinyl with radius reinforcement. Budget end. On large true-radius units vinyl can sag over time unless the manufacturer specs steel or aluminum reinforcement. Ask.
- Glass package. Standard dual-pane; laminated for hail and street noise; tempered where code requires near a floor.
- Configuration. Fixed arch (cheapest, no hardware), operable awning or casement, or a mulled stack where a fixed arch sits over rectangular units.
What Custom & Geometric Windows Cost in Dallas, TX
Expect $4,500 – $15,000 for a typical custom geometry project, and $1,500 – $3,500 for a single arched accent window in an existing wall. Five things move the number:
- Number of units. Each additional custom unit, especially on a curved wall, adds $800 – $2,500.
- Wall condition. Reframing an existing opening, cutting into structural brick, or rebuilding a pier-and-beam wall adds $600 – $2,000.
- Frame material. Clad wood costs $300 – $700 more per unit than wood; vinyl sits at the low end.
- Glass package. Impact-rated or laminated glass adds $400 – $900 per unit.
- Permit scope. Structural wall changes trigger a Dallas permit and inspection; replacing glass in an existing frame typically doesn’t.
Every written estimate itemizes frame, glass, hardware, flashing, trim, and labor line by line. Excluded by default: painting or staining the interior casing, and any drywall or plaster repair adjacent to the opening.
See the difference
Before
After
Before
After
Before
AfterWhat Dallas Homes Specifically Do to This Job
Dallas sits on Blackland Prairie clay, where the soil swells and shrinks hard with the wet-dry cycle. That matters more than weather for windows: a slab or pier-and-beam home that has moved seasonally will have walls that aren’t dead square, so our templates are built on site, never taken from a plan. In older Oak Cliff and East Dallas bungalows, pier-and-beam floors flex and window openings read out-of-square by a quarter inch; new infill in the same neighborhoods sits on post-tension slabs, and the walls move differently. DFW’s high-wind zone means arched units are specified with wind-uplift fastening and hail-rated glazing. If your project touches the exterior approach, homeowners often pair the windows with Concrete Driveways & Concrete Work in Dallas or with Asphalt Driveways & Resurfacing in Dallas while crews are already on site. We cover Dallas and surrounding neighborhoods, including Highland Park and University Park, and our Windows & Doors service carries the 730-Day Done Right Promise on every install.
Serving Dallas, TX – Our Local Coverage Area
We serve Dallas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Dallas
Most Dallas custom & geometric window projects take 3 to 6 weeks from template to final trim, with 10 – 18 business days of that being fabrication. Plan on the long end if you order impact-rated glass or a custom exterior color.
Yes if the project alters a structural wall or cuts a new opening – Dallas requires a permit and inspection for that scope. Replacing the glass in an existing frame generally doesn’t.
Usually yes, if the opening exists and framing is sound. We evaluate the wall before committing; on brick or pier-and-beam walls we may add framing or a header, which adds $600 – $2,000 to the job.
Expect $4,500 – $15,000 for a multi-unit project and $1,500 – $3,500 for a single arched accent. Call (844) 797-4808 for an exact quote – estimates are free.
Every install is covered by the 730-Day Done Right Promise – if it isn’t done right, we make it right within that window. The manufacturer’s glass and frame warranty runs separately.
Get a Free Estimate for Custom & Geometric Windows in Dallas
Arched, round, or angled accents only work when they’re templated on site and installed perfectly level. Call (844) 797-4808 and a live person answers, day or night. We’ll schedule a free on-site visit, measure and template the opening, and return a written, itemized estimate – no vague range, no surprises later.
Written by the team at Groundwork Construction Co.