Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in Duncanville, TX: What It Actually Takes
A wood fence in Duncanville, TX usually runs $3500 – $9000 for a typical residential lot, and the job itself takes two to four working days from tear-out to final post cap. Most of that window is drying time and hardware, not framing. Call (844) 797-4808 for a free on-site estimate. We’ll walk the property line, check setbacks against your plat, and put the number in writing before anything gets torn out.
How We Build a Wood Fence Here, Start to Finish
Fence work looks simple from the street. The difference between a fence that stands twenty years and one that leans in three is almost entirely in what happens before a single picket goes up. Here’s the real sequence.
Stage 1: Site walk and layout (Day 1, 2 – 3 hours)
We pull your survey or plat, confirm the property line, and check the setback rules for your lot. On older Duncanville parcels the plat and the actual pins don’t always agree, so this step matters. You decide the fence height, gate placement, and whether the finished side faces you or the neighbor. That decision changes how we set the posts.
Stage 2: Tear-out and foundation prep (Day 1 – 2)
Old fencing, concrete footers, and stubborn posts come out. This is the surprise stage on a lot of jobs. We set 4×4 posts in concrete at 8-foot spacing (6-foot spacing on taller fences), dug below the root zone so the black clay doesn’t push them sideways later. Posts cure overnight before anything hangs on them.
Stage 3: Rails and framing (Day 2 – 3)
Two or three horizontal rails per section, screwed rather than nailed, with metal connectors at the posts. You confirm at this point whether you want any rot-resistant upgrades at the base.
Stage 4: Pickets and gates (Day 3)
Pickets go up with a consistent gap and a string line so the top reads level from the street. Gates get a proper frame and heavy-duty hinges. This is where a homeowner’s gate swing direction decision locks in.
Stage 5: Staining and final walk (Day 3 – 4)
If you opted into staining, we apply it after the wood settles a day. Then we walk the whole run together, test both gates, and you sign off. Anything off gets fixed before we leave.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
- Cedar vs. treated pine. Cedar is the upgrade most Duncanville homeowners choose. It weathers a natural silver, resists rot and insects without chemical treatment, and lasts years longer. Treated pine costs less up front but drinks stain, warps more in our summer heat, and typically needs replacing a while sooner.
- Dog-ear vs. flat-top pickets. Dog-ear is the traditional look and blends with most ranch homes in Duncanville. Flat-top gives a cleaner, more modern line. Same material cost, different curb appeal.
- Board-on-board vs. butt-joint. Butt-joint is the standard side-by-side picket. Board-on-board overlaps for full privacy with no gap-through, and it’s the right call for a pool or busy street. It adds roughly 15 – 20% to the picket cost.
- Height and spacing. 6-foot is the residential standard. 8-foot raises both material cost and wind load, which matters in North Texas spring storms. Post spacing tightens from 8 feet to 6 feet on taller runs.
- Stain and seal. Clear seal preserves a natural look; a tinted stain gives you color and adds UV protection against our 100°F stretches. Staining runs a fraction more and should be renewed periodically.
Moen, Delta, and American Standard don’t factor into fence work. The brands that matter here are the lumber mill and the fastener supplier, and we’re specific about both.
What Wood Fence Costs in Duncanville, TX
The working range is $3500 – $9000, and the number lands where it does based on five variables, not guesswork.
- Linear footage. The biggest driver. A small front-yard run sits near the low end; a full perimeter of a larger lot pushes toward the top.
- Material grade. Cedar over treated pine, board-on-board over butt-joint, each step moves the price.
- Old fence removal. Hauling off old fencing and breaking out concrete footers is a real line item, often a few hundred to over a thousand depending on condition.
- Height and gate count. Taller runs need tighter post spacing. Each gate adds hardware and framing.
- Permit scope. If your run crosses setback lines or needs a variance, permitting adds time and a fee.
A written estimate from us lists line by line what’s included: posts, concrete, rails, pickets, gates, hardware, tear-out, and stain. What’s typically not included is sod restoration, landscaping relocation, or work on a neighboring property. We’ll flag those separately.
See the difference
Before
After
Before
After
Before
AfterWhat Duncanville Homes Specifically Do to This Job
Duncanville is a built-out, largely post-war bedroom city in southwest Dallas County. Almost every job here is renovation on a 1950s – 1970s single-family home, and the fence work reflects that. You’ll find original concrete footers, aging wood that’s been patched twice, and lots where the plat line runs tight through existing landscaping. The expansive black clay soils that dominate this area heave and shrink through wet-dry cycles, which is exactly why posts set shallow in old fences lean. We dig deeper and set posts in concrete so the soil movement doesn’t walk the fence over. Our long summers over 100°F and the spring hail and wind events also argue for tighter post spacing and heavier fasteners. It’s a different rhythm from the new-build corridor in fast-growth cities to the south. If your fence is part of a full Fence Installation in Duncanville plan, we’ll align the wood run with the rest of the exterior work.
Serving Duncanville, TX – Our Local Coverage Area
We serve Duncanville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Wood Fence in Duncanville
Most residential wood fence jobs take two to four working days, with post-setting and curing accounting for the bulk of the time. Call (844) 797-4808 and we’ll give you a tighter window once we see the lot.
Many runs don’t require a permit, but fences that cross setback lines or exceed height rules often do. We check your plat against local requirements before we start and pull what’s needed. Call (844) 797-4808 to confirm for your lot.
Expect $3500 – $9000 for a typical residential run, with linear footage and material grade driving most of the spread. Call (844) 797-4808 for an exact quote; estimates are free.
Yes. We plan post locations around existing irrigation, trees, and hardscape, and dig by hand where equipment would damage grass. Anything we can’t avoid, we note in the estimate first. Call (844) 797-4808 to walk the yard.
Every fence we build is backed by our 730-Day Done Right Promise. If anything we installed isn’t right, we come back and fix it. Call (844) 797-4808 with what you’re seeing.
Get Your Wood Fence Priced for Your Duncanville Lot
Call (844) 797-4808 to schedule a free on-site estimate. We’ll walk the property line with you, check setbacks, measure the run, and hand you a written number before anyone lifts a shovel. Calls are answered by a live person. If you’re planning broader exterior work, we also cover the surrounding Duncanville area and pair fencing with Paver Driveways in Duncanville or Concrete Driveways & Concrete Work in Duncanville. Our technicians have up to 12 years of experience, and every job is covered by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Dallas.