Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Highland Park, TX: What It Takes and What It Costs
Door Installation in Highland Park, TX typically runs $450 to $1,800 per exterior door and $250 to $900 per interior door in this market, with most single-door projects finished in one to two days. The number moves with the door’s size, the condition of the rough opening behind the old frame, and how much trim and finish work you want matched. Call (844) 797-4808 for a free estimate and we’ll walk your openings and give you a written, line-item quote before anything gets ordered.
How our Door Installation process actually runs, day by day
Most homeowners picture a two-hour swap. On the homes we work in around Highland Park, it’s rarely that simple – the walls are thick, the frames have settled, and whatever was hung there before has been adjusted a dozen times. Here’s the sequence we follow.
Day 1, first two hours – measure and confirm. We pull the interior and exterior trim to see the actual rough opening, not the number on your tape measure at the casing. We check for rot at the sill and the jack studs, confirm the wall is plumb within a quarter inch, and verify which swing direction you want. This is where you lock in the door style, handing, and threshold. Skipping this step is how jobs end up with a door that binds three months later.
Day 1, mid-morning – demo and prep. We cut the old door out, remove the frame and threshold, and clean the opening back to solid framing. Any soft wood gets sistered in. If we find a surprise – a header that was never properly sized, wiring run through the jamb – you get a call before we proceed, not a change order after the fact. Expect one to three hours here depending on how the previous install was done.
Day 1, afternoon – set the door. The new unit goes in, gets shimmed, checked for plumb and square, and fastened. Exterior doors get flashed and sealed at the threshold and the sides before the trim goes back. This is the stage where a bad job looks fine for a season and then leaks, so we spend the time here.
Day 1 or 2 – trim, hardware, and finish. Casing goes back on, the strike plate lines up, lockset and hinges are set, and the gap around the frame is insulated and closed. On interior doors with a paint grade, we’ll have it ready for your painter the same day.
Final walk – usually same day. You open and close it yourself, we adjust the strike or the hinges on the spot if anything catches, and we leave the work area clean. Most single doors are done inside a day; a half-dozen interior doors or a set of exterior doors with a sidelight usually lands at two.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll actually make on a door project
Before we order anything, you’ll narrow down material, style, and hardware. Here’s the honest trade-off on each.
- Fiberglass exterior doors: The best fit for most Highland Park homes. They take paint clean, don’t swell with North Texas humidity swings, and hold up to hail better than steel. Cost runs higher than steel but lower than true wood, and they don’t require refinishing every two years.
- Steel exterior doors: The budget-friendly pick and a solid security choice. They dent more easily under impact and can rust at the bottom edge if water gets behind them. Fine for a service door, less ideal for the front.
- Solid wood exterior doors: The heritage choice for the 1910s to 1930s Tudor and Colonial homes here. Beautiful, expensive, and demanding – they need refinishing on a schedule to survive the heat and sun.
- Hollow-core interior doors: Light, cheap, and fine for closets and secondary rooms. They show damage and they don’t deaden sound.
- Solid-core interior doors: The upgrade most homeowners notice every day. Quieter, heavier in the hand, and better for bedrooms and bathrooms. Roughly double the hollow-core price.
- Hardware: Finish and quality matter more than brand. A mid-tier lockset in a brushed finish will outlast a bargain one. This is also where matching existing hardware in a historic home becomes its own small project.
If your door swap is part of a larger exterior plan, this is usually where we talk through the wider scope – our Windows & Doors service covers the rest, and many homeowners pair a new front door with fence work; Chain Link Fence in Highland Park or Vinyl Fence in Highland Park both come up when the yard is getting cleaned up at the same time.
What Door Installation costs in Highland Park, TX
As a working range, plan on $450 to $1,800 per exterior door installed and $250 to $900 per interior door installed, with a full-entry replacement including a sidelight or a pair of doors landing between $1,200 and $3,000. Five variables move you up or down that range.
- Door material and grade. A hollow-core interior door sits at the bottom of the range; a solid wood exterior entry runs to the top.
- Rough opening condition. Rot, settling, or a previously hacked-in frame adds prep time – usually $100 to $400.
- Size and configuration. A standard single door is the baseline; a double door, sidelight, or an oversize opening pushes cost up.
- Hardware and finish. Matching historic trim and period hardware adds material cost and install time.
- Permit scope. A like-for-like swap rarely needs one; moving a wall or adding a new opening does.
Your written estimate will itemize the door, hardware, trim, labor, and disposal, and it won’t change once the work starts unless we find something hidden behind the wall and you approve it. Not included by default: painting and staining, and any drywall repair beyond minor patching around the trim.
See the difference
Before
After
Before
After
Before
AfterWhat Highland Park homes specifically do to this job
Highland Park is a nearly built-out enclave of century-old homes where almost every project is a renovation, not new construction – and that shows up directly in door work. The housing stock around ZIP 75205 is dominated by 1910s to 1930s Tudor, Colonial, and Mediterranean homes, many of them expanded or rebuilt lot-line to lot-line, so the opening behind the door you see may not match the door it holds. We routinely find a 90-year-old front door hung in a frame someone re-shimmed in 1985, and getting a new door to sit plumb and seal means addressing the framing, not just the slab.
Every project here is shaped by the Town of Highland Park’s own permitting, design review, and lot-coverage rules rather than Dallas codes, so anything beyond a like-for-like swap means planning around the town’s approval process. The mature pecan and live oak canopy over the narrow streets also matters – deliveries of oversize doors and the occasional crane pick need coordination with the town early. Between the heat, the expansive clay under these homes, and spring hail, doors on the south and west faces take a beating and exterior hardware fails faster than most homeowners expect. We cover the whole of Highland Park, and when a door project is part of a full Windows & Doors in Highland Park scope, we handle it under one plan.
Serving Highland Park, TX – Our Local Coverage Area
We serve Highland Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Door Installation in Highland Park
A single door is typically installed in one day, and a set of five interior doors or a full exterior entry replacement usually takes two. Custom or historic-matched doors add weeks to the front end because the door has to be ordered, but the install itself stays in that window. Call (844) 797-4808 and we’ll give you a firm timeline with your estimate.
A like-for-like replacement in the same opening almost never requires a permit, while adding a new opening, moving a wall, or changing an exterior door’s size can. The Town of Highland Park reviews exterior changes more closely than most, so we confirm the requirement before you commit. Call us and we’ll tell you what your specific project needs.
Yes – in most cases a door swap touches only the rough opening and framing, not plumbing or structure. The exceptions are relocating a door to a new wall or widening an opening, which involves a header and possibly rerouting what’s inside the wall. We scope that at the estimate so there are no surprises mid-job.
Interior doors installed run $250 to $900 each, and exterior doors installed run $450 to $1,800 each, with full entries with a sidelight landing between $1,200 and $3,000. Call (844) 797-4808 for an exact quote – estimates are free.
Every Door Installation we do is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right, for two full years after the job closes. That covers our workmanship and hardware install; manufacturers cover the door and hardware themselves. A live person answers our line 24/7, so if something needs attention, you reach a human.
Get a free estimate on your Door Installation in Highland Park
Call (844) 797-4808 and we’ll schedule a free on-site estimate – we measure the actual openings, talk through material and hardware, and hand you a written, line-item quote before anything is ordered. No-hassle upfront pricing, the number you see is the number you pay, backed by the 730-Day Done Right Promise. Live person answers 24/7. $1,000 off projects over $10,000, with 0% financing for 18 months available.
Written by the team at Groundwork Construction Co.